Page 3 of 24
#31 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by SoniX 28.06.2015 00:20

avatar

Zitat von zt3 im Beitrag #30
Flashed without any problem.



Congratulations. :)

#32 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by SoniX 10.07.2015 17:37

avatar

Updated collection of OROM VBIOS and BSF-script files.
Updated "Table VBT OROM VBIOS Version and Size.docx "

#33 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by Jest 25.07.2015 23:21

What to do, if there is a red entry - Integrated HDMI/DisplayPort...../Device 1?



I didn't figure it out what it means, but it's working.
Motherboard is MSI C847MS-E33 with integrated Celeron 847 (sandybridge).
Copy from hwinfo 5.02

Intel Sandy Bridge-MB GT1 - Integrated Graphics Controller [D2/J1/Q0] [Micro-Star International]
2170 PC 14.34 08/07/2013 08:01:27

Original vbios was 2137.

#34 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by SoniX 26.07.2015 00:36

avatar

Zitat von Jest im Beitrag #33
What to do, if there is a red entry - Integrated HDMI/DisplayPort...../Device 1?

Send source and destination files.

#35 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by Jest 27.07.2015 02:10

Zitat von SoniX im Beitrag #34
Zitat von Jest im Beitrag #33
What to do, if there is a red entry - Integrated HDMI/DisplayPort...../Device 1?

Send source and destination files.



As you might saw, i resolved issue already. Thanks anyway.
But you can maybe help with next one.
I have Zotac zbox ID-18, with Celeron 1007u ivybridge. OROM 2165 and VBT A8 or 1.68, which are not on the version list.
With this computer i don't want to flash blindly like yesterday, because i can't use discrete graphic card if something goes wrong.
So, for the test i used 2158 script, but i get red entry at "General Features" and "Integrated HDMI/DisplayPort...../Device 1, Device 2, Device 3"
Here is bios, transfer.ssf and vbios_new.dat. Hope this is required stuff.

Thanks for your help.

#36 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by SoniX 27.07.2015 14:09

avatar

@Jest
You had to use the script snm_2170.bsf, since the size of VBT 2165 == 2170.

#37 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by Jest 27.07.2015 19:51

I updated bios and it works, but in HWinfo under video adapter "video BIOS version" is Unknown.

#38 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by SoniX 27.07.2015 20:12

avatar

Zitat von Jest im Beitrag #37
I updated bios and it works, but in HWinfo under video adapter "video BIOS version" is Unknown.

If you use UEFI mode, the OROM VBIOS version will not be displayed.

#39 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by Jest 27.07.2015 20:18

Ok, this explains everything.

Thank you very much.

#40 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by javahk168 29.07.2015 16:42

Hi,

My desktop mother broad is MSI Z77A-G45 (MS-7752) Rev 1.1. An Intel SandyBridge i3-2100 is installed on it. I have the following questions:

1) Your guide says "For Desktop DevID SNB-102, IVB-162, HSW/BDW-402,412,c02,c12". Should I select "8086,162" for my SandyBridge as it should be for IvyBridge?


2) In my case, version VBT - " A6 00" -> A6 (v1.66); size VBT - "0E 0F" -> 0F0E (3854 byte) ; 2137 version OROM

Am I right to select "snd_2137.bsf"?


3) Why the "VBT Information" in Intel Binary Modification Programm (IBMP) shows "VBT version: 165", not 166 (A6 -> v1.66)? Is it normal or abnormal?


4) Should I set "Chipset Selection>VBIOS Configuration for Chipset" to "Sandybridge Desktop" for my Sandybridge CPU?

one string of the output file is different according to this setting: IVB -> $Chipset 13; SNB -> $Chipset 11


Thanks for your kindly attention :)

#41 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by SoniX 29.07.2015 17:45

avatar

Zitat von javahk168 im Beitrag #40
1) Your guide says "For Desktop DevID SNB-102, IVB-162, HSW/BDW-402,412,c02,c12". Should I select "8086,162" for my SandyBridge as it should be for IvyBridge?
On motherboards with chipset 7th always basically DevID 162. This is normal.

Zitat
2) In my case, version VBT - " A6 00" -> A6 (v1.66); size VBT - "0E 0F" -> 0F0E (3854 byte) ; 2137 version OROM
Am I right to select "snd_2137.bsf"?

I do not know why Intel suggests using the script version 1.65. All the files are original, provided by Intel.
Yes, versions OROM VBIOS, and the script must be the same.

Zitat

3) Why the "VBT Information" in Intel Binary Modification Programm (IBMP) shows "VBT version: 165", not 166 (A6 -> v1.66)? Is it normal or abnormal?


This is normal. The program displays a message version of the script, not the OROM.

Zitat
4) Should I set "Chipset Selection>VBIOS Configuration for Chipset" to "Sandybridge Desktop" for my Sandybridge CPU?
one string of the output file is different according to this setting: IVB -> $Chipset 13; SNB -> $Chipset 11


No. Leave as is.

#42 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by javahk168 29.07.2015 19:41

Thank you very much. I have successfully modified the VBIOS with your help.

#43 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by quetzalin 01.08.2015 01:34

avatar

Anyone able to reupload the Intel BMP?, the link is down :(

Thanks!

#44 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by Fernando 01.08.2015 01:39

avatar

Zitat von quetzalin im Beitrag #43
Anyone able to reupload the Intel BMP?, the link is down :(
Look >here<.

#45 RE: [Guide] Transfer of specific Intel VBIOS settings by using Intels BMP tool by SoniX 01.08.2015 17:37

avatar

Collection OROM and BSF-scripts.
Strange problems with storage on SendSpace and RGHost. One server is lost, and on the other does not upload. So I upload here.

Xobor Forum Software von Xobor
Datenschutz