Page 97 of 478
#1441 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Matrix985 07.02.2017 13:06

Hello, the usb flash port is a USB 2.0 port, so it comes on the plate, specifically in my P9X79 plate is just below the flash button.
From what I understand it works like a normal Usb port and with the computer turned off as Bios flasher.
Anyway I have continued looking posted I have found this:
Flashing modified ASUS P9X79 DELUXE Bios V4801.
I have to recognize that my English is bad enough, but has a possible fix what "Security Verification Failed"?
Thank you

#1442 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Fernando 07.02.2017 13:18

avatar

Zitat von Matrix985 im Beitrag #1441
has a possible fix what "Security Verification Failed"?
This is the usual message you will get, when you try to flash a modded capsuled ASUS mainboard BIOS named XXXX.CAP into the BIOS chip of an ASUS mainboard by using the "normal" flash method.
You will not get this message, if you flash the modded BIOS via USB Flashback method (provided, that the BIOS is usable and the flashing procedure has been done the correct way).

#1443 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Paulos7 07.02.2017 20:41

I want to thank Fernando, CodeRush, and others that have helped with useful information in this thread. If it were not for this thread, and the tools and resources to do the mod, my 960 EVO would still be in it's box waitng for my next motherboard/CPU/memory upgrade. Thank you.

#1444 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Matrix985 07.02.2017 22:40

Dear Fernando, I have just come up with a possible solution to the problem of not being able to update the BIOS by the motherboard flash.
If the problem with that connector is that, it is probably entering current by ground when connecting a device, as the board is turned off.
Using a USB cable, female connector, and removing the connector pins from the ends of the connector or isolating them, since they are the (+) (-) and leaving the two central pins which are the (D +) and (D-) of data. Obviously you have to feed the usb pendrive to work, this would be achieved by an external power of 5v and I think that this way you could flash the Bios.
All this to confirm with an electronic technician and try.
a greeting

#1445 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Christophy 08.02.2017 10:51

Hello.
Recently i found your guide how to get NVMe support.
Problem is, that i can't find a ROM with bios for my Asrock P67 Pro 3.
Do you have any guesses where could i find it?
On Asrock website there's only .exe file that installs the bios.
With best regards,
Chris

#1446 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Fernando 08.02.2017 12:27

avatar

@Christophy:
Hello Chris,
welcome at Win-RAID Forum!

Zitat von Christophy im Beitrag #1445
On Asrock website there's only .exe file that installs the bios.
You are right and I don't know how to extract it.
My advice: Ask the ASRock Support for the latest "pure" BIOS file for your special mainboard.

Regards
Dieter (alias Fernando)

#1447 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Christophy 08.02.2017 13:46

@Fernando
Ok, i got the bios and did everything. It's format after using MMTool is .fd.
And when i do instant flash it says there's nothing in the usb drive.
What should i do now?

#1448 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Fernando 08.02.2017 13:57

avatar

Zitat von Christophy im Beitrag #1447
Ok, i got the bios and did everything. It's format after using MMTool is .fd.
How was the BIOS file named, when you got the original extracted version?

Zitat
And when i do instant flash it says there's nothing in the usb drive.

How did you format the USB drive before copying the BIOS file onto it?
How was the file named?
Did you remove the BIOS header? Note: The UBU tool does it autmaticly, when it opens an ASRock AMI Atio IV UEFI BIOS, which contains such header.

#1449 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Christophy 08.02.2017 14:02

So the bios file was P67P32.00 the one i got.
USB was FAT32, the file was named same.
Nope, i did not, because when i got it into this program, I couldn't extract this as body.
Here's a screen.
http://imgur.com/a/UQx2Q

#1450 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Fernando 08.02.2017 14:07

avatar

@Christophy:
Please put the "pure" original and modded BIOS files into a ZIP or RAR archive and attach the package.
I will do a look into both files.

#1451 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Christophy 08.02.2017 14:12

Here you are :)

#1452 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Fernando 08.02.2017 14:26

avatar

Zitat von Christophy im Beitrag #1451
Here you are :)
Thanks for the attachment.
Result of my analysis:
1. Both BIOS files are not capsuled. So it should be possible to get the modded BIOS file successfully flashed by using ASRock's "InstantFlash" utility.
2. The NVMe module seems to be correctly inserted.
I suspect, that the InstantFlash utility didn't find the modded BIOS file, because it hasn't been named like an original ASRock BIOS.

#1453 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Christophy 08.02.2017 14:45

xxx

#1454 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Fernando 08.02.2017 15:02

avatar

Zitat von Christophy im Beitrag #1453
Do you have any idea how should it be named? :/
Try it with the name of the original BIOS file (P67P32.00).

#1455 RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up by Christophy 08.02.2017 15:04

@Fernando
Well, my bios was 3.25, not 2.00 XD Now it passed after i got back to 2.00 bios.
Thing is, i wanted earlier to put NVMe in 3.3 bios...
It says file size exceeds the volume size. Any guesses?|addpics|dl0-1-a84b.png|/addpics|

Xobor Forum Software von Xobor
Datenschutz