Page 5 of 173
#61 RE: USB 3.0 Drivers (original and modded) by sfektsz 02.06.2015 00:21

One more question: Is there any difference between installing USB 3.0 drivers through Device Manager rather than opening the Setup.exe? The only thing I noticed is the iusb3mon.exe doesn't start up/run. A google search about this gave me no answers either

#62 RE: USB 3.0 Drivers (original and modded) by plutomaniac 02.06.2015 00:30

avatar

Zitat von sfektsz im Beitrag #61
The only thing I noticed is the iusb3mon.exe doesn't start up/run. A google search about this gave me no answers either

It's a small monitoring utility that checks whether you have connected a USB3 powered device to enable special features such as fast charging etc. That is only installed with the normal setup,the .inf is just the driver without any extra accompanying utilities/features.

#63 RE: USB 3.0 Drivers (original and modded) by Fernando 02.06.2015 00:32

avatar

Zitat von sfektsz im Beitrag #61
Is there any difference between installing USB 3.0 drivers through Device Manager rather than opening the Setup.exe?
The installation of the Intel USB 3.0 Software is not necessary at all for a proper function of the USB 3.0 ports. I always install just the drivers from within the Device Manager. For details please read the chapter "Tips for the manual installation of USB 3.0 drivers", which you can find within the start post of this thread.

#64 RE: USB 3.0 Drivers (original and modded) by johnathonm 05.06.2015 00:11

Hi Fernando,

I have a question. Is there any benefit in actually installing these drivers? I am on a series 7 chipset and every time I try to install it locks up my usb ports. Am I missing something or is it just not compatible?

Thanks for all your hard work. I use your modded RST driver all the time.

-J

#65 RE: USB 3.0 Drivers (original and modded) by Fernando 05.06.2015 00:39

avatar

@ johnathonm:
Welcome at Win-RAID Forum!

Zitat von johnathonm im Beitrag #64
I am on a series 7 chipset and every time I try to install it locks up my usb ports.
The USB 3.0 ports will not work until the driver installation has been completed and a reboot has been done.
Questions:
1. Which OS are you running?
2. Which Intel USB 3.0 driverpack version did you try to install?
3. How did you do it (by running the installer or manually)?

Regards
Dieter (alias Fernando)

#66 RE: USB 3.0 Drivers (original and modded) by gpvecchi 12.06.2015 23:05

avatar

http://www.station-drivers.com/index.php...28Serie-8-9%29/

#67 RE: USB 3.0 Drivers (original and modded) by Fernando 13.06.2015 02:13

avatar

Zitat von gpvecchi im Beitrag #66
http://www.station-drivers.com/index.php/outils/Drivers/Intel/USB-3.0/Intel-USB-3.0-Controller-Version-4.0.0.29-Beta-%28Serie-8-9%29/
I am not sure, if I should modify these drivers, because they are not WHQL certified (contrary to the v4.0.0.27 ones).

#68 RE: USB 3.0 Drivers (original and modded) by gpvecchi 13.06.2015 15:18

avatar

Zitat von Fernando im Beitrag #67
Zitat von gpvecchi im Beitrag #66
http://www.station-drivers.com/index.php/outils/Drivers/Intel/USB-3.0/Intel-USB-3.0-Controller-Version-4.0.0.29-Beta-%28Serie-8-9%29/
I am not sure, if I should modify these drivers, because they are not WHQL certified (contrary to the v4.0.0.27 ones).

Yup, they're beta... Well, that's your choice, I personally find that most of time WHQL is just a certification. So, if modded drivers break certification... :-)

#69 RE: USB 3.0 Drivers (original and modded) by Fernando 13.06.2015 19:58

avatar

@ all:
Update of the Start Post:
Changelog:

  • new: 32/64bit Intel USB 3.0 Drivers v4.0.0.29 dated 04/16/2015
  • new: Intel USB 3.0 Drivers & Software Set v4.0.0.29 dated 04/24/2015
  • new: 32/64bit Intel USB 3.0 Drivers v4.0.0.29 mod by Fernando
  • removed: 32/64bit Intel USB 3.0 Drivers v4.0.0.27 WHQL
  • removed: Intel USB 3.0 Drivers & Software Set v4.0.0.27 WHQL
  • removed: 32/64bit Intel USB 3.0 Drivers v4.0.0.27 mod by Fernando

Thanks to ex58 for having found the new drivers.

Good luck with these new original and modded Intel USB 3.0 drivers!
Fernando

#70 RE: USB 3.0 Drivers (original and modded) by gpvecchi 14.06.2015 17:20

avatar

Thanks! I have this issue on Z77: the extensible controller can't find the correct driver and it is listed as PCI bus...

#71 RE: USB 3.0 Drivers (original and modded) by Fernando 14.06.2015 17:57

avatar

Zitat von gpvecchi im Beitrag #70
I have this issue on Z77: the extensible controller can't find the correct driver and it is listed as PCI bus...
Please post the DeviceID of the on-board Intel USB 3.0 eXtensible Host Controller.

#72 RE: USB 3.0 Drivers (original and modded) by TigTex 15.06.2015 02:47

avatar

As an IT technician, I work with a lot of computers. One usb3.0 controller that I found many times on laptops (usually packard-bell / acer ) are from NEC.

The uPD720200 http://www2.station-drivers.com/index.ph...-2.1.39.0-WHQL/
and the uPD720201 http://www2.station-drivers.com/index.ph...-3.0.23.0-WHQL/
The most usual version is uPDF720201 that uses the 3.0.23.0 driver. These drivers also work on windows 8/8.1 without modding.

I noticed that they are missing on the first post.
Just to let you know Fernando ;)

#73 RE: USB 3.0 Drivers (original and modded) by Fernando 15.06.2015 13:32

avatar

@ TigTex:

Thanks for your suggestion to add download links to the "latest" NEC/Renesas USB 3.0 drivers to the start post of this thread.
Until now I haven't done it, because
a) these USB 3.0 drivers are not updated anymore by NEC/Renesas and
b) the mainboard manufacturers stopped the integration of NEC/Renesas USB 3.0 Controllers already some years ago.
Nevertheless I will follow your advice and add these old USB 3.0 drivers.

#74 RE: USB 3.0 Drivers (original and modded) by gpvecchi 15.06.2015 22:57

avatar

Zitat von Fernando im Beitrag #71
Zitat von gpvecchi im Beitrag #70
I have this issue on Z77: the extensible controller can't find the correct driver and it is listed as PCI bus...
Please post the DeviceID of the on-board Intel USB 3.0 eXtensible Host Controller.


PCI\VEN_8086&DEV_1E31&SUBSYS_84CA1043&REV_04\3&11583659&0&A0

#75 RE: USB 3.0 Drivers (original and modded) by Fernando 15.06.2015 23:06

avatar

@ gpvecchi:
Thanks for the HardwareIDs, which verify, that Intel 7-Series Chipsets are not supported by the modded Intel USB 3.0 drivers v4.0.0.29.
What shall I do:
a) completely remove the Intel USB 3.0 drivers v4.0.0.29 from the start post and reinsert the v4.0.0.27 ones,
b) replace just the modded Intel USB 3.0 drivers v4.0.0.29 by the v4.0.0.27 ones (which obviously worked for your system) or
c) just remove the DEV_1E31 entries from the modded INF files of the drivers v4.0.0.29 and add a notice, that Intel 7-Series Chipsets are not supported?

Xobor Forum Software von Xobor
Datenschutz