Page 1 of 2
#1 [Request] Gigabyte G1 SNIPER B6 BIOS with NVMe Support by Kherri106 21.06.2020 13:16

Hi could someone please mod a bios for Gigabyte G1 SNIPER B6 to support nvme boot at full speed capacity of the nvme drive

Edit by Fernando: Thread title customized

#2 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by Lost_N_BIOS 21.06.2020 21:04

avatar

@Kherri106 - Only the first x16 PCIE slot can do PCIE 3.0, so if you want full NVME speeds, you will have to move your graphics card to x4 PCIE 2.0 slot.

Flash via QFlash - http://s000.tinyupload.com/index.php?fil...115788194665521 (** May need renamed to NIPERB6.F3, not sure)
Then follow this guide, at step #4 in the "This is what you should do" section, follow all steps exactly
[Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

#3 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by Kherri106 27.06.2020 02:53

@Lost_N_BIOS
Thanks will try it out

#4 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by ded_junior16 05.06.2021 16:11

Please re-up NIPERB6.F3 for dowloading. link please!!???! Tankyouuuu

#5 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by ded_junior16 05.06.2021 16:11

Zitat von ded_junior16 im Beitrag #4
Please re-up NIPERB6.F3 for dowloading. link please!!???! Tankyouuuu

please link re-up.

#6 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by BDMaster 07.06.2021 00:10

@ded_junior16
Lost_N_BIOS there isn't from long time friend, but if do you want we can try to make it again ...
Let me know
Regards

#7 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by ded_junior16 07.06.2021 17:47

friend, yes please, for my ssd nvme to work on this motherboard. I'm waiting, thank you

#8 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by BDMaster 07.06.2021 23:11

Ok friend, i made it by UEFI Tool 028 , so follow the instructions, Flash via QFlash :

https://www.mediafire.com/file/bse5jcxqy..._Small.rar/file

Let me know
Regards

P.S. if you get issue then use the DualBios to recovery your system.

#9 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by ded_junior16 09.06.2021 03:58

hello, I did the bios recording procedure and I was not successful, the ssd nvme ASGARD 256gb does not appear in the boot session. any settings for the bios? I tried everything without success

#10 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by ded_junior16 09.06.2021 14:24

I followed all the steps in the tutorial, including installing Windows 10. It won't boot. Any solution?

#11 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by BDMaster 09.06.2021 15:15

I reuploaded it again , try this time :

https://www.mediafire.com/file/bse5jcxqy..._Small.rar/file

let me know
Regards

#12 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by ded_junior16 09.06.2021 18:14

Friend thank you very much, I updated the BIOS again, and it worked, it worked perfectly. Thanks for listening

#13 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by AgentJeffy 16.06.2021 04:01

Are you getting full speeds?

Right now I'm only getting a max of 800mbps on my NVME and am wondering if it's worth doing all this if it doesn't actually get to full NVME M.2 speeds.

Also, from what the owners manual says about this board, the NVME slot shares bandwidth with the x4 slot, not the x16

@Lost_N_BIOS is there something is the owners manual incorrect about their specification of the x4 slot sharing bandwidth with the NVME slot, or does the flash you provided change the sharing?

Thanks in advance for replies!

#14 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by MeatWar 16.06.2021 04:15

avatar

Lost as been away since January...u wont get more than x4 using M.2 direct slot or PCIe M.2 adapter...as currently max drives r PCIe4.0 x4 or PCI3.0 x4.
So on old mboard the bottleneck is only PCIe2.0 x4 against PCIe3.0 x4...the rest depends on the performance of the NVMe itself.



Using PCIe lanes from CPU the PCIe3.0 it will be shared according the B85 chipset, using PCIe lanes from PCH it only gives u PCIe2.0

#15 RE: Gigabyte G1 SNIPER B6 (Full NVME BOOT BIOS mod request) by AgentJeffy 19.06.2021 23:21

So then something's wrong on my G1. Sniper B6 because this NVME I'm running is only getting 820mbps on CrystalMark read speeds @MeatWar

Or were those benchmarks from a different system?

Xobor Forum Software von Xobor
Datenschutz