Page 1 of 114
#1 [Discussion] UBU Tool related Questions, Reports and Suggestions by Fernando 31.03.2019 15:56

avatar

@all:
The original UBU Discussion thread, which had been started in September 2013, has become very voluminous.
That is why I took the opportunity of SoniX's release of his new v1.71 UBU development platform to start a new thread with the same title, but without containing all the old stuff.
From now on all users, who have a question, a report or an idea regarding the UBU tool, should post it into this new thread.

Note: The formerly used, but meanwhile outdated UBU Discussion thread has been closed by me, but its content is still available >here<.

Thanks!
Dieter (alias Fernando)


By the way - this was the original post:
SoniX hasn't yet officially released the new UBU tool v1.71 (although there is already something available at his hoster).
So please be patient and wait for SoniX's announcement, which we can expect tomorrow.
It doesn't make sense to write any report about an UBU version, which hasn't yet been released/announced by SoniX. Maybe he is still testing it himself.

#2 RE: [Discussion] UBU Tool related Questions, Reports and Suggestions by panosxidis 31.03.2019 15:59

avatar

@Fernando
i have one question mate!!!i update my cpu microcode the latest is greatest?i see diffrent for perfomance much faster and overclock with lower voltage!!!can you explain this?thanks again

#3 RE: UBU v1.71 test version by SoniX 31.03.2019 16:19

avatar

@Fernando

Thanks.
I downloaded outside the home, so there is no publication.
But it seems there are already problems with the replacement of VROC.

@tistou77

Zitat von tistou77 im Beitrag #5017
When I open UBU, I can update the VROC, etc ...


I save the bios by renaming, but if I reopen the bios with UBU, I only have that


It's normal ?

It looks like no. But I can not say for sure.
Send the original image of BIOS.

Fixed!

PS
Reupload. Later I will give a description.

#4 RE: UBU v1.71 test version by panosxidis 31.03.2019 20:26

avatar

GREATE job sonix!!!!!!!

#5 RE: UBU v1.71 test version by N6O7 31.03.2019 21:42

avatar

Hello, thanks for the great work.

Just that now MMTOOL v5.0.0.7 had to be renamed "mmrool_a4.exe" and not "mmtool_a4.exe" (like the Non-official
UEFI BIOS Updater v1.71 Dev Test 3)...

Is the typo correct for the last UBU v1.71.1?

#6 RE: UBU v1.71.1 by Fernando 31.03.2019 21:52

avatar

@N6O7:
Thanks for your hint!
After having checked the code of the UBU.bat file I found out, that it was just a typo within SoniX's update announcement (unfortunately copied and pasted by me). Meanwhile the mistake has been corrected by me.
So the MMTool v5.0.0.7 has to be renamed to "mmtool_a4.exe".

#7 RE: UBU v1.71.1 by Fernando 31.03.2019 22:10

avatar

@SoniX:
Thank you very much for having developed and released the new official UBU tool v1.71.1.
Meanwhile I have tested the new tool - without having added the MMTool - with the latest BIOS for my ASRock Z170 mainboard.
Result: Your tool worked flawlessly!
Congratulations for this great progress!!!

#8 RE: UBU v1.71.1 by panosxidis 31.03.2019 22:28

avatar

fernando the cpu microcodes the latest is greatest your opinion?

#9 RE: UBU v1.71.1 by Fernando 31.03.2019 22:31

avatar

@panosxidis:
The latest CPU Microcodes may not always be the best (performance related), but will give your system the best possible security.

#10 RE: UBU v1.71.1 by SoniX 31.03.2019 22:49

avatar

The UBU includes the latest revisions of microcodes that are available on the GitHub.
All links in the file "ubu_abt.mht".

Also in UBU there is a transition to the MCExtractor with DB release page.

1
2
3
4
5
 

[MCExtractor]
...
V - View available versions (Internet access required)
 
 


And many users do not update the MCE DB themselves and report supposedly new microcodes. :)


PS Sorry for the typos in the descriptions.

#11 RE: [Discussion] UBU Tool related Questions, Reports and Suggestions by thinking 01.04.2019 01:24

@SoniX
I couldn't link on Neither onedriver link nor developer's link.
Could you give mega.nz link? at least it can succeed one in twenty times.
Thanks.

#12 RE: [Discussion] UBU Tool related Questions, Reports and Suggestions by Fernando 01.04.2019 01:36

avatar

Zitat von thinking im Beitrag #11
Could you give mega.nz link?
>Here< is the requested MEGA link.

#13 RE: [Discussion] UBU Tool related Questions, Reports and Suggestions by KedarWolf 01.04.2019 02:19

Just a warning, with my Z390 board I used the latest version of UBU Tool to update the microcode and PC wouldn't boot. Q-Code 18. I don't think it's a UBU Tool issue but a problem with the microcode. Not sure why a microcode update would bork my BIOS though. I had to use a USB BIOS programmer to go back to the stock BIOS.

#14 RE: [Discussion] UBU Tool related Questions, Reports and Suggestions by SoniX 01.04.2019 09:05

avatar

@KedarWolf

Q-Code 18 - what does he mean? Is there a decryption code?
Send the original BIOS image or link.

#15 RE: [Discussion] UBU Tool related Questions, Reports and Suggestions by KedarWolf 01.04.2019 09:19

Q-Code 18 is an incompatible CPU error. But works fine with the stock BIOS without the microcodes updated.

https://www.gigabyte.com/ca/Motherboard/...support-dl-bios latest F8 BIOS.

Xobor Forum Software von Xobor
Datenschutz