Page 4 of 51
#46 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by gabrielmartinslima 28.06.2019 07:01

@Lost_N_BIOS - I tried doing your mod guide, but in that AMIBCP part, when I click save, it shows a warning saying "Saving secure rom as unsigned". Is that a problem? Can I flash or will it brick?

#47 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 28.06.2019 07:18

avatar

Did you dump BIOS via FPT, then edit that? I can't remember for sure if that is normal on these or not, but that warning itself doesn't matter because you're not using AFU to flash the BIOS anyway, you're using FPT so unsigned will not matter
I can do the mod if you want?

* Edit, sorry I just realized that Cyberpower BIOS I mentioned is much older than your current, so I wouldn't use that anyway 1.04 vs your current 1.10

I'm doing your mod BIOS now, will let you know if I get that message in AMIBCP, but as I said above it doesn't matter anyway
* Edit - @gabrielmartinslima - Mod done (Added to guide/files), and yes, that message is normal from AMIBCP, ignore since you are using FPT as mentioned. As long as your edit is correct BIOS will be fine!

#48 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by yaoyulun 07.07.2019 10:48

Hi @Lost_N_BIOS
I've try to follow the guide in order to modify an MACHENIKE T90 :GJ5CN6A
but it can't work

origin bios link :https://1drv.ms/u/s!AosoYa-vJBdngYJRZe_6NX4_awtqJQ?e=jsExCE

#49 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 17.07.2019 12:18

avatar

@yaoyulun - added to guide, and helped you in thread you made too

#50 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by danferreira 23.07.2019 07:20

Thanks for the guide! Worked fine on my GJ5CN6E model: H700 from 2.A.M(Brazilian brand)

I don't know if everything I did was necessary but since my Bios is 1.04 just like the CyberPower NB-408-109, I flashed the Bios you posted from CyberPower and after that I followed the tutorial.

I have only one suggestion, it might help if you add an observation about the file the end with ".efi" so people know that they have to use "replace body"

Thanks again, keep up the work!

#51 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 23.07.2019 07:40

avatar

@danferreira - Thanks for your feedback, and you're welcome! Whatever BIOS you used, you need to flash the stock one first, then FPT dump and use the mod files to make new mod BIOS or use guide to mod your own FPT dump - then reflash.
Thanks for you tip, I will check to be sure I mentioned extract/replace body at AMITSE module, I think I did in guide but now I see in files here I posted some AMITSE I uploaded entire module and others only body. I did mean for all AMITSE to be EFI/Body files, and wrote the guide out for that I think
Which step do you think I should add to, since you notice this. I will add "If extracting body = .EFI and to be sure to replace body, if extracting as-is = SCT and be sure to replace as-is" Either way is fine for any module, but I do now see some I extracted body and others as-is for AMITSE

I see now, in main guide I mentioned replace as-is, but in your BIOS I extract body (maybe others too, will check). When I edit AMITSE myself, I normally extract body, same for setupdata too, due to how I read these files with other tools, all other modules except NVRAM I usually extract as-is
I will add addendum, since a few have AMITSE body and others as-is - * edit - notation added at step #12 in the main guide, and step #6 in the advanced guide. Does that explain it good enough for everyone to understand?

#52 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by danferreira 23.07.2019 10:40

Zitat von Lost_N_BIOS im Beitrag #51
@danferreira - Thanks for your feedback, and you're welcome! Whatever BIOS you used, you need to flash the stock one first, then FPT dump and use the mod files to make new mod BIOS or use guide to mod your own FPT dump - then reflash.
Thanks for you tip, I will check to be sure I mentioned extract/replace body at AMITSE module, I think I did in guide but now I see in files here I posted some AMITSE I uploaded entire module and others only body. I did mean for all AMITSE to be EFI/Body files, and wrote the guide out for that I think
Which step do you think I should add to, since you notice this. I will add "If extracting body = .EFI and to be sure to replace body, if extracting as-is = SCT and be sure to replace as-is" Either way is fine for any module, but I do now see some I extracted body and others as-is for AMITSE

I see now, in main guide I mentioned replace as-is, but in your BIOS I extract body (maybe others too, will check). When I edit AMITSE myself, I normally extract body, same for setupdata too, due to how I read these files with other tools, all other modules except NVRAM I usually extract as-is
I will add addendum, since a few have AMITSE body and others as-is - * edit - notation added at step #12 in the main guide, and step #6 in the advanced guide. Does that explain it good enough for everyone to understand?


Thanks for the reply

I understand what you added at step #12 but I think you should be just a little bit more newbie friendly

* Please note * If your "Bios Mod" folder has a file extension = .EFI, be sure to choose "replace body" instead of "replace as is" / If extracting as-is resulting file extension = SCT and be sure to replace as-is

just a suggestion so that another newbie like me can understand

#53 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 24.07.2019 05:44

avatar

@danferreira - You're welcome, and I agree, and I tried to write that out as best I could from a non-BIOS modders point of view, trying to make it as easy and clear as I could.
Please do let me know if you think I should add anything more, or re-word anything! I've changed the wording on #12 to more like what you mentioned above, let me know if you think it's more clear now

#54 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by mediadoctor 26.07.2019 10:13

I've try to follow the guide in order to modify an Medion Erazer X17805 : GK7CP7S
but it can't work because i can not found modified files for my model notebook :(

origin bios link: https://cloud.mail.ru/public/bMF2/4qBVagmZL

#55 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 26.07.2019 12:33

avatar

@mediadoctor - please give me link to full stock BIOS package, with EC, BIOS flash tools etc, if you have it - thanks. I don't need for the mod, but want, in case someone asks me later after I add your model to the guide.
Also, I will do the mod, and add to guide, but what part was giving you issues, in case I need to explain something different or better in the guide?

#56 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by mediadoctor 26.07.2019 12:57

Guide is very light for me and comfortable.

BIOS package, with EC, BIOS flash tools https://cloud.mail.ru/public/CkAm/4mx8u7fFZ

#57 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 26.07.2019 13:09

avatar

What? That doesn't make sense to me, if "it can't work for you"??? To me, what you said above means >> Great guide, easy reading, easy to understand, no problem to follow.
So, you can see how your current reply doesn't match with your previous

Thank you for the link to full BIOS package. I checked this BIOS, mod is done same exact way as all the others I wrote the guide for. So, if you do want to do yourself, you need to let me know where you were having problems.
Or, if you just want me to do for you that is fine too, let me know.

* Edit, - is that the complete package? There is No EC FW or flasher, and no other BIOS flash tools etc? I'd really like to have the complete package if you have it, with all original files and folders and file/folder names etc.
This just BIOS file, batch file and AFU

#58 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by mediadoctor 26.07.2019 13:29

I have only this :(
Problem on step 12 because have not modded files for my Laptop

#59 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 26.07.2019 13:34

avatar

Thanks, it's OK, I hoped you had entire package. And on the guide, sorry, I assumed you were using the advanced guide, in spoiler, to directly modify your BIOS dump. You should have been stuck at #9 then, that is the first place you use a file to replace something
Since without that, rest of guide above spoiler can't be used on your system because your model is not added to the guide/mod files yet. No worries, I will add to guide and send you mod BIOS too

* Edit @mediadoctor - here is your mod BIOS, and files/model added to guide now too for your system, if you want to try doing the basic edit/swap yourself
http://s000.tinyupload.com/index.php?fil...661965516514493

Flash via >> FPTw.exe -bios -f biosbackupM.bin

#60 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by mediadoctor 26.07.2019 14:04

sorry, yes on step 9 have problem because not have files for replacement

Xobor Forum Software von Xobor
Datenschutz