Page 3 of 51
#31 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by SandroMarciano 27.04.2019 09:43

@Lost_N_BIOS sorry again, it's correct that PE32 AMITSE has ".efi" extention? "Section_PE32_image_AMITSE_AMITSE_body.efi" size is different from the other mod. Thanks!

#32 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 27.04.2019 12:01

avatar

@SandroMarciano - yes this is normal/proper, be sure to replace "body"
Yes, I know size is different, remember that's what caught my eye when you first mentioned issues and I looked over those files, the original one was wrong size for that BIOS's file, so I knew right away it wasn't the right one originally in that package for your model.
The new package is 100% correct, I used stock BIOS and did the mod from scratch yesterday so no mistakes this time around! Last time, I probably was doing 2-3 of similar models and accidentally saved wrong one into that folder, similar to how I mixed up those BIOS version names on it too.
You're good to go

#33 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by SandroMarciano 27.04.2019 12:22

@Lost_N_BIOS the attached one is that I used. I add some characters at the top of the fileafter parsing with one build by my own (with your advanced guide :)).
At the moment I'm writing from the modded notebook, thank you for your perfect guide and your support!

#34 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 27.04.2019 12:38

avatar

@SandroMarciano - You're welcome, and thank you for using my guide, and again thanks for pointing out this issue with the file mix-up too!
So, now BIOS works for you properly, and saves your settings too now correct? Hope so

The file you attached is AMITSE PE32 "As-Is" (with header), not PE32 "Body" per the guide, you know this correct? Is that what you meant, about the characters? That is all this is, AMITSE PE32 As-Is w/ header
Did I not clearly explain how to extract and replace AMITSE PE32 "Body" in the guide? If you think not, let me know and I will try to explain that better, so there is not any confusion on this file (w/ header like you attached above) and body.efi like you asked about before (Guide method)

#35 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by tsmswifty 29.04.2019 02:47

Should I use this guide to unlock my GJ5KN6A? I kinda don't know the ins and outs of bios mods though...

edit: I attached my bios here:

https://files.catbox.moe/ddpce8.bin (should be biosreg.bin but I guess it renamed it)

If you could do it I would be greatful!

#36 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by blind012 12.05.2019 06:59

@Lost_N_BIOS I appreciate all the work you've put into making this for peasants like me lol. My OP-LP3 17.3 now has a modded bios with all the settings I could ask for! But I was curious if you happen to have The latest EC update for my TONGFANG OP-LP3 - GK7CN6S? The OP site isn't very good at keeping things like that accessible. I'm currently on EC Version 1.07.09 and I'm having issues with my processor throttling too 35w while playing battlefield V regardless of what setting I try. I've literally been trying everything all day and I'm curious if the EC being out of date is the culprit?

#37 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 12.05.2019 07:55

avatar

To anyone reading later, I helped @tsmswifty with his model BIOS, and it's now tested/confirmed working and added to the guide files at first post

@blind012 - that is the only EC I have, and it's from the N.1.04 BIOS package. I have the 1.08 BIOS but the package I found (sent to me from user) didn't come with EC file like the rest usually do.
You can email OP and ask for new BIOS+EC package, I've seen from a few members here they're quick to reply to emails usually. Ask for latest, or ask them for the EC FW that should go with the N.1.08 BIOS package
If you get a copy of that EC, or a newer BIOS+EC package, please let me know, thanks

#38 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by blind012 12.05.2019 08:55

I have an email about it sent too them, I'm awaiting a reply. I'll share with you what I get/find out. Could you send me the 1.04 bios by chance? Would harm be done if I were to downgrade from the modded bios to that stock one? I got the computer with 1.03 and the dedicated Mac fan button wasn't a fan button until I upgraded to 1.08. Upon upgrading to 1.08 my processor would throttle too 35w after about a minute of BFV. So, because I couldn't find a different BIOS version, I tried your modded bios in hopes I could adjust something in it to remove that throttle and I've had no luck. All the settings are quite nice to have in your modded bios but if 1.04 removes the throttle on me, I'd use that one. Thanks

#39 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 12.05.2019 09:13

avatar

@blind012 - Here is BIOS 1.04 - no, no harm is done by downgrading BIOS, but you will loose unlocked BIOS features until you unlock it again (or have me send you unlocked files to use)
http://s000.tinyupload.com/index.php?fil...666224913296564

The issue you mention may not be controlled by EC anyway, that may be due to different power plan settings in the BIOS between 1.03 and 1.08, you'd have to compare each stock BIOS in AMIBCP and check all those CPU/power related settings.

@pcfr33k may have the 1.08 EC FW file? lets see

#40 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by davidm71 10.06.2019 01:21

avatar

@Lost_N_BIOS

From your guide I quote:
"5. Back to the IFR txt, search and find each menu ID, Main, Advanced, Chipset and so on, there will be duplicates of most, some 3-4 (Boot usually). Using search term "Form: Chipset" for example will help you quickly locate everything. Copy each one and shorten down into manageable and useful info for this mod like you see in my example below. You only need the name of each, and it's form ID, so you will be copying and pasting, then cutting out unnecessary info. Near the top of the IFR, you'll find a set of menu names (Setup, Main, Advanced, Chipset etc) This is the list of the main hidden ones in these BIOS, and this is also the list of menus you see at root of setup module in AMIBCP (So you know later, those are ones to edit in AMIBCP) "

So my question is how do you know which form menu items are hidden ones just by reading the IFR??

Also trying to understand your edits on the AMITSE File. You have at address 00055e84 a 'Hidden' list and at address 000534c4 a 'Hidden Short List'. Any reference to form ids in those tables will result in that form being hidden? That is why your blanking them out because you want to show them??

Thanks

#41 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 10.06.2019 10:51

avatar

@davidm71 - Speaking in general, not specifically in regards to the BIOS here, sometimes you can tell by which ones are suppressed in the setup IFR (If suppress if = true, not some variable).
Other times you must see the BIOS, that is why you'll often see me asking for at least a single shot of each main BIOS section, so I can compare settings shown vs setup settings either via IFR or AMIBCP, to then determine which is visible and which is hidden.
After a while you can just tell by looking at AMIBCP, some brands it's always top set hidden, or you can tell by which has least options usually = visible one etc. I do always prefer to ask user to see BIOS images though, so I know for sure and don't have to redo anything.

On any list of ID's labeled hidden, yes, if you want to unhide a menu you must remove it from any hidden list along with all other needed changes, such as adding to a visible list, unsupressing in setup, or access level in AMIBCP.
On access level edit sometimes this is needed along with a setup or AMITSE edit, sometimes not and will cancel out a menu that would be visible without the AMIBCP edit, only way to know is test with/without.
Anything you are hiding or switching some menu to hide, add it into that block list.

I'm happy to see you learning all this, on top of what I know you already know how to do Soon you will have to join my BIOS editing Army of One

#42 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by gabrielmartinslima 28.06.2019 05:24

@Lost_N_BIOS - Do you have the mod files for Avell A52-5 BS (GJ5CN6E) BIOS version N.1.10? Here is my biosreg.bin link: https://mega.nz/#!6IYURCaR!-IQr6xsNH9vkR...YJikTnMI-V6eQTQ

#43 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 28.06.2019 06:03

avatar

@gabrielmartinslima - No, I've never heard of this system, if it's same/similar as the others I can make mod BIOS for you and thus create/add the files and that model to this guide.
Do you have the stock BIOS package? If not, can you please try to find and get me link, preferably with the EC file included too if you can, if not don't worry.
I ask for this because often user ask me for the stock version too if they want to update to that version or flash to this BIOS before applying the unlock mod

#44 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by gabrielmartinslima 28.06.2019 06:12

@Lost_N_BIOS - Unfortunately, Avell doesn't provide stock BIOS packages, nor any BIOS update info or software, so I am stuck to what I can extract from the motherboard

#45 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 28.06.2019 06:57

avatar

Many of these companies don't, but if you email them and ask for update or old BIOS (Current) to reflash, then they may send to you.
I see this confirmed from one users post here - https://adrenaline.uol.com.br/forum/thre...i.618967/page-6
What do you get when you input serial, model etc here and choose "Others" https://avell.com.br/drivers/

I see this is Clevo reseller, so you can use Clevo BIOS, of course these are all interchangeable anyway as long as you pick same model/GFX card type
Generally by this name >> GJ5CN6E - SO Cyberpower 1.04 BIOS from front page, if you wanted, I can send you this stock BIOS + EC to flash first if you want?
Or I can just mod your current BIOS, up to you, let me know.

Xobor Forum Software von Xobor
Datenschutz