Page 2 of 51
#16 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by paska.houso 01.03.2019 12:23

Tested and it works!

Thanks

#17 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by victzhang 08.03.2019 09:00

Tested and worked on my OverPowered - GK5CN6Z laptop!
Used the latest UEFITool NE Alpha (A55) and worked fine.
Also tried to overclock my laptop in BIOS. There are a lot of options to tweak, and if some settings go wrong (e.g. clock too high), I need to remove CMOS battery to reset BIOS.

#18 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by cvex24 12.03.2019 23:31

Does anyone have the link to the
MechRevo Z2 Series GK5CN4Z/GK5CN5Z (GK5CN4X5X) >> BIOS N.1.07
file? I can't find it anywhere. I'm trying to mod the bios of my OP-LP1 (GK5CN4Z)

#19 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 13.03.2019 04:32

avatar

@cvex24 - here is stock BIOS you asked about - http://s000.tinyupload.com/index.php?fil...389208389856033
If you want modified BIOS, see first post

Whoever gave me that may have labeled it wrong, or told me incorrect info? I don't see GK5CN4Z specifically inside the package. I do remember someone telling me depending on graphics card may be one name or another, but I'm not certain about any of that.
I don't see GK5CN4Z anywhere, other than the name of the package I received from some user here. I do see in the BIOS "release notes" GK5CN4Z_5Z named. Dump your BIOS via FPT and send me a copy and I will check this out myself and should be able to confirm if you're on this BIOS or not.
On notebook forum thread I see this "OP-LP1 stands for the GK5CN5Z and OP-LP2 for the GKCN6Z"
http://forum.notebookreview.com/threads/...gk5cp0z.815943/

@nimaim @pcfr33k - can one of you guys clarify the above for me, thanks

#20 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by cvex24 13.03.2019 06:41

I'm not actually running the Mechrevo BIOS, I was hoping to upgrade to it and then unlock it. The GK5CN4Z should be the proper name for the OP-LP1 because it has a GTX 1050 whereas the GK5CN5Z has a GTX 1050ti. Based on the files from the notebookforum, it appears that the same BIOS may be usable for both models because both BIOS files from OP and Illegear are labeled intel_CFL_GK5CN4Z5Z

#21 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 13.03.2019 07:18

avatar

@cvex24 - I only have the stock package you asked about above >> GK5CN4X5X - link to download is on post #19
Internal folder name >> intel_CFL_GK5CN4X5X_Mechrevo_BIOS_N.1.07_EC_1.15.09_20180428 I assume 4X5X = 4Z5Z same/same
In the release notes, you can see original package name was GK5CN4X5X and then they started using 4Z_5Z and 4Z/5Z , download the above package and you can see what I mean.
I believe this is the BIOS you wanted, all same, just some people/manufacturers name packages or BIOS differently but all mean same

Since you are not currently running and plan to crossflash other BIOS, you can choose any one you want, they all work interchangeably from what I've seen on this.
If BIOS versions mean newer, than this one probably best/newest >> MACHENIKE F117-B1/2 - GK5CN5Z >> BIOS_N.1.09, from the GK5CN5Z line anyway

#22 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by cvex24 13.03.2019 07:36

Understood, thank you for all the help!

#23 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by ditchmagnet 25.04.2019 02:49

Would this allow the ability to disable HT? And does this have the option to reverse the FN key function?

#24 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 25.04.2019 05:15

avatar

@ditchmagnet - Yes on HT, it's located at Advanced 2 >> CPU Config >> Hyper-Threading
FN Key function I do not see in BIOS options, maybe extra key on the KB, or it's not possible.

#25 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by mtlhus 26.04.2019 00:52

Hello, first of all I want to thank you @Lost_N_BIOS for your effort. I want to ask if you have the bios files for MACHENIKE F117-B1/2 - GK5CN5Z >> BIOS_N.1.09
I'm using 1.07 for GK5CN5Z but it has some problems on the EC side. Thanks for your help.

#26 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by SandroMarciano 26.04.2019 14:27

Hi everyone, thanks @Lost_N_BIOS and everyone who works to make bios mod possible!

I've try to follow the guide in order to modify an TF notebook: GJ5CN6E from PCSpecialist (named Vyper).
Untill this morning I was on bios version v1.00, so I have updated up to v1.04 from Cyberpower (NB-408-109) - bios+EC; rebooted and tested all working correctly.
Then I have modded dumped bios like the guide and flashed, but i can't save parameters in bios, every time I apply any kind of modification after rebooting bios restart from default parameters.
Maybe the problem is related to modified files that is ready for version 1.08!? But I can't find stock 1.08 bios.

Thanks

Sandro

#27 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 26.04.2019 19:06

avatar

@mtlhus - do you mean stock files for that, or mod? If you mean mod, they are linked on page one, if you need stock files sorry I don't have them, your best bet is to ask here - http://forum.notebookreview.com/threads/...gk5cp0z.815943/

@SandroMarciano - yes, that may be the issue, if you used the actual mod BIOS files instead of doing the mod yourself on 1.04 BIOS. Here is the stock BIOS package for CyberPower NB-408-109 - intel_CFL_GJ5CN6E_CyberPower_BIOS_N.1.04_EC_1.06.09_20180523
If you actually did the mod yourself, instead of using the mod BIOS files, then maybe you missed something or messed up an edit, because if you dump your own BIOS and do the actual edits, it shouldn't matter what version you are using
http://s000.tinyupload.com/index.php?fil...969088752797013

#28 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by SandroMarciano 26.04.2019 19:35

@Lost_N_BIOS thanks for your answare, I used that bios with the already modded file uploaded in the op, but the mod file is named "CyberPower-NB-408-109-GJ5CN6E-N.1.08-Mod-Files" so firmware version 1.08 instead of 1.04 that i have now in my laptop (the same you posted before). So v1.08 exhist or is only a wrong named opf moddedd file?

Thanks again,

Sandro

#29 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by Lost_N_BIOS 26.04.2019 20:13

avatar

It must be mistake I made when typing out the mod/file names then, on guide part I put correct name and BIOS version (First one in the list)
I searched all my BIOS files for Cyberpower and GJ5CN6E and NB-408-109 and N.1.08 and that is the only BIOS I have except Cyberpower GK7CN6S N.1.08 (Unless someone sent me a dump or incorrectly named package and I didn't add cyberpower or N.1.08 to the folder name)
But, seeing as I typed it out correctly in the guide info at top, and all other places I posted that info before, I think I just made mistake in the naming of the mod files/package

Since you have issue with the BIOS Mod files, I will redo 1.04 from stock right now and repackage it all again into new mod files package. Please wait, then download package once I'm done and re-apply mods (in case I mistakenly put GK7CN6S files into that folder!)
If, after I mod the files again, and compare and its 100% hex match same, I will let you know and no repackaging will be done.

* Edit @SandroMarciano - thank you for pointing this out, I do think I mixed something up with the mod files, that's why it's not working for you right now!
I started to do the mod and before doing anything I checked the size of files to be edited and AMITSE is wrong size for this BIOS, so came from different model!
Very sorry about this, thank you for brining it to my attention, I will correct it all now and redo the files in first post shortly!


* Edit 2 @SandroMarciano - all fixed now, thanks again. Please redownload Mod BIOS Files2 and redo your mod - guide currently messed up as I edit it, sorry for any inconvenience to anyone reading

#30 RE: OverPowered TONGFANG CyberPower Machrevo MACHENIKE - Unlocked BIOS Guide W/ Files by SandroMarciano 27.04.2019 01:27

No problem, Thanks for new mod file, I'll test tomorrow and report.

Xobor Forum Software von Xobor
Datenschutz