Page 4 of 5
#46 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by BeanTownRO 10.03.2019 00:56

Thank you, Lost_N_BIOS, and the rest of the forum members here for information and links to the mod BIOS. Following the info here I was able to add an NVMe PCIe SSD, via a low cost adapter card bought at eBay, to my GA-970A-UD3P Rev. 2 motherboard/PC .

#47 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by adre-adre 08.10.2019 12:35

Please help me or tell me what I'm doing wrong. I have a Gigabyte GA-970A-UD3P Rev.1 motherboard and SSD Silicon Power P34A80. I downloaded and upgraded the mod bios but the drive is not visible in the BIOS. I tried two bios from the first page, there is no result (.The drive works fine in the system.What am I I'm doing wrong, maybe my drive does not support this???Thanks

#48 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by Lost_N_BIOS 08.10.2019 21:50

avatar

@adre-adre - follow this guide, at step #4 in the "this is what you should do" section
[Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

#49 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by adre-adre 11.10.2019 09:29

Yes, everything worked out. I just didn’t do it right. Thank you for your work !!!

#50 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by Lost_N_BIOS 11.10.2019 09:54

avatar

@adre-adre It's tricky, and if you don't know what to do at first it can mess with everyone, good to see you finally got it installed
And you're welcome, thanks for reporting back

#51 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by maksimikys 05.12.2019 10:48

hello, I tried all the firmware bios and not one does not see this kit (samsung nvme 970 evo plus + Alphacool HDX-2) on 970A-UD3P Rev 1.0

#52 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by dfeweer 05.12.2019 17:20

Hello All, first time posting on this forum.

I also have a 970A-UD3P rev 1.0 motherboard with rev F1 of the BIOS.

I just bought a Samsung 860 Pro 2.5" 512GB drive (https://www.newegg.com/samsung-860-pro-s...N82E16820147684) and I was wondering what BIOS version do I need to use.

Thanks in advance for the help.

Dan

#53 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by Lost_N_BIOS 05.12.2019 19:00

avatar

@maksimikys - you must install in a certain way, with certain BIOS settings, did you do that?
You need to do a clean operating system install, follow all steps exactly as mentioned in step #4 of the "This is what you should do" section of this guide - [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

@dfeweer @maksimikys - I looked through the thread, and for 970A-UD3P Rev 1.0, this (F2n) seems to be the latest BIOS with the mods done post #30 of this thread, page 2
[OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) (2)

#54 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by maksimikys 06.12.2019 07:00

Thank you, having made a clean installation of the system through dancing with a bubble everything earned, but on another m/b

#55 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by Lost_N_BIOS 06.12.2019 07:34

avatar

@maksimikys - You're welcome. So, success then?

#56 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by maksimikys 06.12.2019 07:57

yes, ga-990xa-ud3 r5 rev 1.0 bios support nvme - test OK.

#57 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by Silverwing1830 22.02.2020 13:36

hey hi i have a question i have the same situation as same as your please tell me is that bios mode also works with that motherboard model GA-970A-DS3P (rev. 2.x) rev. 1.0 and after dowload the file what i have to do do i need a bootable usb??? And my bios version is FD you can find here https://www.gigabyte.com/Motherboard/GA-...support-dl-bios please help me with this issue.. thanks have a good day.

#58 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by Lost_N_BIOS 23.02.2020 06:44

avatar

@Silverwing1830 - see this thread for 970A-DS3P Rev. 2.0 board mod BIOS - [OFFER] Gigabyte GA-970A-DS3P rev2.x BIOS Mod NVME Added
Post #49, is latest BIOS I updated for that board, it has NVME Mod + updated CPU microcodes - [OFFER] Gigabyte GA-970A-DS3P rev2.x BIOS Mod NVME Added (4)

Put on root of FAT32 formatted USB, boot to BIOS, hit F8 to get into Qflash, then browse to the USB stick and find the file to update (USB needs to be plugged in before you boot to the BIOS)

#59 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by fracomix 14.12.2020 10:36

Hi everyone!
There's any chance that some of you have a GA-970A-UD3P Rev 2 modded BIOS? I've been searching for hours without finding it.

THANKS!

#60 RE: [OFFER] Gigabyte GA-970A-UD3P Rev. 1.0 BIOS F2g completely updated (incl. NVMe support) by hakan3050 29.12.2020 10:06

What bios software should I use for my motherboard Gigabyte GA-970A-DS3P rev 2.1 nvme m. Thanks in advance.

Xobor Forum Software von Xobor
Datenschutz