Page 75 of 345
#1111 RE: Windows XP SP3 32bit and modern PC parts by canonkong 23.07.2019 13:58

avatar

@diderius6
I think NEC will best than other.
https://downloadcenter.intel.com/zh-cn/d...ctronics-USB3-0-

#1112 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 14:16

@canonkong

I just see, that the VIA xhci driver can be replaced by the driver from Asmedia.
But the Intel chipset for USB 3.0 does not work with modded Asmedia or Via driver
Dietmar

PS: So, NEC (now Renesas) may be the better choice for generic USB 3.0 for XP for Intel chipset.

#1113 RE: Windows XP SP3 32bit and modern PC parts by canonkong 23.07.2019 14:24

avatar

@diderius6
If you use IDA to open the xhci.sys ,you will find almost all usb drivers will have a ven ID 1033, VEN_1033 meant NEC's ID.

#1114 RE: Windows XP SP3 32bit and modern PC parts by infuscomus 23.07.2019 14:27

@canonkong

this doesn't work in virtualbox

https://www.zone62.com/media/jcm/og/8fc8461f672fdba2.png

#1115 RE: Windows XP SP3 32bit and modern PC parts by canonkong 23.07.2019 14:34

avatar

@infuscomus
Some intel devices can not work well some parts using this driver. I think we need to find a better one to modify to support XP.

#1116 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 14:39

@canonkong

For Intel with x390 chipset with modded *.inf for xhci.sys comes message code 10,
driver (xhci from Nec) does not start
Dietmar

#1117 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 14:47

@canonkong
I just found with IDA pro, that there is a hardcoded ID 1033 check and 194x in the NEC driver xhci.sys
and so, suddently BIG chances for success with Intel
Dietmar

#1118 RE: Windows XP SP3 32bit and modern PC parts by canonkong 23.07.2019 14:54

avatar

diderius6
Some drivers just modify the ID identify area is not enough. Like intel usb3.1 driver, I modified few parts to make it work. If you know DebugView ,Debuggers , OllyDbg . You can use them to find out where is the block.

#1119 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 14:58

PAGE:0003420B mov eax, 1033h
PAGE:00034210 cmp [ebp-11Ch], ax
PAGE:00034217 jnz short loc_34239
PAGE:00034219 mov eax, 194h
PAGE:0003421E cmp [ebp-11Ah], ax
PAGE:00034225 jnz short loc_34239
PAGE:00034227 cmp byte ptr [ebp-114h], 4
PAGE:0003422E jnz short loc_34239
PAGE:00034230 mov byte ptr [ebx+192h], 1
PAGE:00034237 jmp short loc_34240

#1120 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 15:19

Hack to

PAGE:0003420B mov eax, 1033h
PAGE:00034210 cmp [ebp-11Ch], ax
PAGE:00034217 jnz short $+2
PAGE:00034219 mov eax, 194h
PAGE:0003421E cmp [ebp-11Ah], ax
PAGE:00034225 jnz short $+2
PAGE:00034227 cmp byte ptr [ebp-114h], 4
PAGE:0003422E jnz short $+2
PAGE:00034230 mov byte ptr [ebx+192h], 1
PAGE:00034237 jmp short loc_34240

Now I get code 39
Dietmar

#1121 RE: Windows XP SP3 32bit and modern PC parts by canonkong 23.07.2019 17:15

avatar

@diderius6
Not right,you can compare my modified intel USB driver and the original driver,you will find what I had did.
jnz=>jmp
[Solution] Win7 drivers for USB 3.0/3.1 Controllers of new Intel chipset systems

#1122 RE: Windows XP SP3 32bit and modern PC parts by cedar 23.07.2019 18:28

@infuscomus


"IRQL NOT LESS OR EQUAL" was from 2003.
From bluescreenview, it pointed to Ntoskrnl error.

I also tried ACPI 64 bit on XP64. the screen instantly BSOD
and reboot immediately on normal or safe mode, so I couldn't see
what message was.

Cedar

#1123 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 18:38

@canonkong
I tried this also,
does not work for Nec USB 3.0 driver on Intel USB 3.0 on chipset from z390
Dietmar

#1124 RE: Windows XP SP3 32bit and modern PC parts by infuscomus 23.07.2019 19:11

@cedar

ACPI for XP64 will need a patched ACPI driver and XP64 is not well supported, best to use Win7 64

any luck installing with my ISO?

#1125 RE: Windows XP SP3 32bit and modern PC parts by cedar 23.07.2019 20:14

@infuscomus

The acpi64bit was from diderius6 posted earlier. As it was
an early version, so I can't expect too much.
Your iso can installed from burnt disc, Like my other burnt discs,
It will BSOD in multi acpi both std or safe mode too when reboot.

But If installed on my Ivy system. and then swap HD to Ryzen board.
I think it can boot in safe mode, like my other trials.

PS. I think diderius6 's new usb3.2 driver can work on your iso, but not
on my own XP installation after many BSODs on usbport.sys trials.

Cedar

Xobor Forum Software von Xobor
Datenschutz