Page 74 of 345
#1096 RE: Windows XP SP3 32bit and modern PC parts by cedar 22.07.2019 20:41

@diderius6

Good works!. The USB3.0 posted earlier did not work in my Asus Prime 350 board.
Can you post the new mod 3.0 driver? may be it will work for me too.

Any progress on XP64 ACPI?. Backup from X265 is about 35% faster on
X64 platform than 32 bit OS. The newest ffmpeg64 for XP64 tested is at
about Nov 2017. Don't know if anyone have a newer version?

Cedar

#1097 RE: Windows XP SP3 32bit and modern PC parts by diderius6 22.07.2019 20:56

@cedar
Make try with the USB file
that I post here (with nice help from @canonkong). It is really generic
Dietmar

#1098 RE: Windows XP SP3 32bit and modern PC parts by cedar 22.07.2019 21:14

@infuscomus

Not much luck with the burned iso. It did installed without swapped hard
till the end with no error(grahicic mode). But it also flash BSOD next run
like my own earlier installs. No minidump. Standard mode is ok.

Tried 2003 ent. trial version. Std mode also ran. Can see Standard mode
and multi PC ACPI under CPU entry at the same time. BSOD when changed
to ACPI and see next message as IRQL NOT LESS OR EQUAL.

bluescreenview pointed to Ntoskrnl error.

XP2003 was tried from installed on ivy system than swap to Ryzen. Will
try burn ISO sometime later.

Cedar

#1099 RE: Windows XP SP3 32bit and modern PC parts by diderius6 22.07.2019 21:22

Also all USB 2.0 USB 3.0 USB 3.1 USB 3.2 slots work now on the nice board
asrock fatal1ty ab350 gaming k4 under XP SP3,
just together with Ryzen 3700x
Dietmar

#1100 RE: Windows XP SP3 32bit and modern PC parts by diderius6 22.07.2019 22:32

@canonkong
Can you please upload the whole package,
with the unmodded driver for AMD USB?
I notice, that for the Asmedia USB there are
2 different xhci.sys files for Intel and AMD.
On Intel boards we have to mod the other one
Dietmar

#1101 RE: Windows XP SP3 32bit and modern PC parts by IntiMD 22.07.2019 23:37

avatar

Zitat von diderius6 im Beitrag #1100

I notice, that for the Asmedia USB there are
2 different xhci.sys files for Intel and AMD.
On Intel boards we have to mod the other one
Dietmar


Not him, but if you are talking about the AMD64 and the IA64 folders, they're just different instruction sets - x64 (otherwise known as AMD64, x86-64) and the Intel Itanium architecture (otherwise known as IA-64, isn't in mainstream anymore and retired in 2021) respectively.

#1102 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 00:04

@IntiMD

I mean the AMD driver (AMD64 64 bit, just name for AMD) for XP
and the i386 name for Intel for XP 32 bit.
Until now I do not have the this whole package of unmodded drivers.
With the Asmedia driver I have some success today,
but I think this are the most difficult drivers of all USB,
so may be AMD or VIA is much easier to mod and to take the oldest version of them which works for XP 32 bit
Dietmar

#1103 RE: Windows XP SP3 32bit and modern PC parts by IntiMD 23.07.2019 00:21

avatar

Zitat von diderius6 im Beitrag #1102
@IntiMD

I mean the AMD driver (AMD64 32 bit, just name for AMD) for XP
and the i386 name for Intel for XP 32 bit.



Like i said before, AMD64 is one of the names for the x86-64 (64-bit) arch, while i386 is one of the names of the x86 (32-bit) arch. The folders are depending on the OS bitness. The ASMedia drivers include both 32 and 64-bit builds of the drivers and since the usb 3.0 drivers should be targetted for XP 32-bit, the driverfiles in the i386 folder need to be modified.

#1104 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 01:10

@IntiMD

Of course you are right,
it was my mistake.
There is no difference between AMD 32 bit and Intel 32 bit,
driver is always in i386 folder
Dietmar

PS: The generic AMD driver here works also for the Asmedia 3.1 USB under XP 32 bit.
But it does not work for Intel chipset USB 3.0 which looks strange to me, I dont understand why not.
I make new test with the VIA 3.0 driver for Mod.

#1105 RE: Windows XP SP3 32bit and modern PC parts by canonkong 23.07.2019 01:55

avatar

@diderius6
Very good!Use the same name to replace the system itself usb driver, maybe we can make a generic usb driver replace the system inside usb driver.

#1106 RE: Windows XP SP3 32bit and modern PC parts by infuscomus 23.07.2019 06:57

@cedar

was IRQL NOT LESS OR EQUAL. BSOD with my ISO, or server 2003 ISO?

#1107 RE: Windows XP SP3 32bit and modern PC parts by canonkong 23.07.2019 07:48

avatar

@diderius6
Try this new, not have stor.sys.
KEY: xiaofengmod
https://yadi.sk/d/8MtPIJxFYoBAbQ

#1108 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 11:05

@canonkong
I test the new driver on Intel evga z390 dark board,
for the USB 3.0 from Intel chipset.
The same happens as before, during install of this driver the compi gets frozen
Dietmar

PS: May be, in this case a modded VIA USB 3.0 driver would be the better choice.

EDIT: Your new AMD driver for XP has also the problem, that usbstor.sys again does not start (gives unknow device).
So, until now we have only the generic USB driver for XP, where I changed amdstor.sys against usbstor.sys.
This one works everywhere, only for INTEL chipset USB and XP not, this is so strange.

EDIT2: So strange things happen with usb3 driver for Intel chipset:
The xhci.sys file is NOT copied correct to windows\system32\drivers (something like a sceleton of this xhci.sys appears there) and
even when you put the whole file xhci.sys there into by hand,
on next boot it is gone there!!! I never saw anything like this before in XP.
I set start=0 and Group=System Reserved for all USB files which starts them very early, no chance of version missmatch
or something like, because at this very early bootstage all will be loaded.
Crazy, I can see, that the driver xhci.sys is loaded very early together with usbstor.sys, but then again xhci.sys is deleted(!).
May be because of this soso strange thing, the hub3.sys driver can not install(!) and start
Dietmar

#1109 RE: Windows XP SP3 32bit and modern PC parts by canonkong 23.07.2019 11:53

avatar

@diderius6
Maybe we can use intel itself USB driver for xp to modify.

#1110 RE: Windows XP SP3 32bit and modern PC parts by diderius6 23.07.2019 12:06

@canonkong
The problem in to use Intel driver for USB is, that there are none for XP with USB 3.0.
For Win7 32 bit they exist, but there are dependencies in drivers to ntoskrnl,
that XP does not fullfill.
The only chance in this is, that somebody has the source code for this drivers
and compiles it for win server 2003 32 bit
Dietmar

Xobor Forum Software von Xobor
Datenschutz