Page 1 of 2
#1 dell 930m by frossy32 18.10.2018 02:24

well,i have dell vostro 5459. 930m (dram3)
want the clocks to be 1250 for gpu and 1125(2250) for the memory
it goes only 59 degrees under full load.
i am clueless,9 years ago flashed 9600m gt with help from mmtool and open rom/bin.(can,t even extract mainboard bios now)

#2 RE: dell 930m by Lost_N_BIOS 18.10.2018 05:43

avatar

MMtool is not used at all for graphics card BIOS, so that's not what you used years ago, that tool is for motherboard BIOS

So you want 9600M GT BIOS edited for GPU Speed and Memory speed? If yes, dump GPU BIOS with GPU-z, and I will check the BIOS and show you what tools to use to do that modification.

Here is how with GPU-z

https://www.techpowerup.com/gpuz/

And, on the bottom of GPU-z, there is drop-out menu, if your card is SLI there will be two options in the drop-out menu, dump BIOS from each one (Select top choice, dump BIOS, select bottom choice, dump BIOS) because both BIOS will need updated at same time.
Be aware, GPU-z BIOS flashing on laptop is VERY risky, you cannot easily recovery if the flash goes badly. It may be best to make these changes with software in windows.

#3 RE: dell 930m by frossy32 18.10.2018 12:55

i know.9600m gt bios was inside motherboard bios.Used mmtool to extract it.Recomposed it and flashed it succesfully.Also used phoenix tool aswell,dont remember exactly.Used nibitor for vga bios and so on.Dont have that acer for years now. Now i have the modern dell.Cant extract the mb bios from dell,s exe.I do have the maxwell nvidia bios editor.I can not extract the mb bios for composing.Gpu z propably works for mxm(socketed gpu).My gpu is build onto mb.

#4 RE: dell 930m by Lost_N_BIOS 18.10.2018 13:01

avatar

Link me to your stock BIOS exe and I'll check it out and we will see. You could be correct, but that's not the norm, especially for add-in PCIE cards like you mentioned. Maybe it's not add-in though, possibly it's formed into part of the actual motherboard.

Did you try dumping via GPU-z as I mentioned anyway, if not do that, zip those up and send me link, and also add link to Dell Stock BIOS and I'll check it all out for you.

#5 RE: dell 930m by frossy32 18.10.2018 13:18

https://www.dell.com/support/home/ee/en/...-laptop/drivers

#6 RE: dell 930m by frossy32 18.10.2018 13:21

Gpu z -bios reading not supported on the device

#7 RE: dell 930m by frossy32 18.10.2018 13:44

How can I access my gt 930m bios? -i also add this.Different laptop,but he managed like this.

#8 RE: dell 930m by frossy32 18.10.2018 14:04

i did try 7-zip and universal extractor for mb bios exe file.Both can not extract

#9 RE: dell 930m by Lost_N_BIOS 18.10.2018 14:15

avatar

Ohh, don't worry, I can extract BIOS from Dell, not a problem there. Show me GPU-z error in image, with full GPU-z window visible too, thanks

On that thread, they talk about vBIOS within BIOS, like you mentioned, so it must not be a PCIE card, it must be soldered onto/made into part of the board (not an add-in card)

I'll get the BIOS extracted for you no problem, do you need me to modify the vBIOS, or just pack it up for you to mess with?

#10 RE: dell 930m by frossy32 18.10.2018 15:29

wow,quick respond.You could modify the bios and also send the extracted exe. I would like the vga bios inside to have 1270 boost clock for gpu and 1125ddr3(2250 effective)for memory.If possible,then also +0.1v for gpu. will add picture soon

#11 RE: dell 930m by Lost_N_BIOS 18.10.2018 15:34

avatar

I try to reply fast when I am here, but heading out now sorry, will catch up with you again tonight. I've already extracted BIOS, and vBIOS (2x Intel EFI/GOP for CPU's) and then x3 for nVIDA in there so please add GPU-z image so I can see which BIOS card is using now

#12 RE: dell 930m by frossy32 18.10.2018 15:39

-----------I checked overclocking and would wan,t 1.1v ,that means +0.17v.Max possible seams to be 1.2v ,but thats not needed.

#13 RE: dell 930m by Lost_N_BIOS 19.10.2018 05:39

avatar

So, your GPU has SLI possibly? I see it says SLI Disabled in GPU-z, can you enable SLI in the Nvidia software, or are you sure this is one core GFX?
Before I do anything, if you can enable, please enable SLI, and then in the drop-out menu in GPU-z, pick the second bottom most entry for 930M and see if the BIOS version shown is the same for that core as it is for the one you have in the image above.

Here's he info I've gathered graphics related for now, will check into modifying the values you mentioned tonight
BIOS platform - AMI Aptio V
Manufacturer - Dell Inc.

Intel GOP SubGUID 380B6B4F-1454-41F2-A6D3-61D1333E8CB4
VBIOS in GUID DB8F87A0-8921-4D09-BE7B-93D5F1ECB0A0 >> #3 below
VBIOS in GUID E4D65F56-A552-4F74-BDC4-C6EFFF0F993B >> #2 below
VBIOS in GUID A0327FE0-1FDA-4E5B-905D-B510C45A61D0 >> EFI/GOP Below (At subGUIDs)
VBIOS in GUID A56C405A-2F54-4E06-83B1-21BF4D43AEA5 >> #1 below

Video OnBoard
EFI GOP Driver SkyLake - 9.0.1039 >> 380B6B4F-1454-41F2-A6D3-61D1333E8CB4
OROM VBIOS SkyLake - 1033 >> C5A4306E-E247-4ECD-A9D8-5B1985D3DCDA

1. 3GM108 N16 E2045 SKU 10 VGA BIOS Version 82.08.6F.00.06 1996-2016 NVIDIA Corp - 11/30/16 - GM108 Board - 20450010 (Not exactly same as #3)
2. 3GM108 N16 E2701 SKU 5 VGA BIOS Version 82.08.6F.00.07 1996-2016 NVIDIA Corp - 05/16/17 - GM108 Board - 27010005 << From your GPU-z image, looks like this is the one used currently
3. 3GM108 N16 E2045 SKU 10 VGA BIOS Version 82.08.6F.00.06 1996-2016 NVIDIA Corp - 11/30/16 - GM108 Board - 20450010 (Not exactly same as #1)


*Edit @frossy32
Here is extracted BIOS (R00), and extracted Nvidia vBIOS files, please note the one I mentioned as used from your initial GPU-z image, it's probably only one that needs edited.
Also included is modified vBIOS I made, Maxwell vBIOS editor, and a modified BIOS with the inserted vBIOS I made based on your requested settings (1267.5 GPU Boost clock set, couldn't do 1270 exact and I think 1280 was next, and 1125 set for memory)
https://www.sendspace.com/file/89ubck

Flash BIOS with AFU/AFUWin/AFUWINGUI, or whatever other method you know works.
I know AFUWin/AFUWINGUI works due to exe being compiled with AMI tools and the stock included command flash, but unsure what version you need, if needed later I can package up a few versions for you to try.

vBIOS can be edited using included Maxwell Nvidia BIOS editor
Here's a few guides
https://www.overclock.net/forum/69-nvidi...ks-maxwell.html
https://www.overclock.net/forum/71-nvidi...itor-guide.html
http://www.xtremesystems.org/forums/show...)-vBIOS-Modding

#14 RE: dell 930m by frossy32 19.10.2018 14:08

82.08.6F.00.07 - looks correct,but subvendor acer and memory clock 1000.Looks like a gdram 5 version from acer? My memory 900mhz by default.Could have had something mixed?Maybe maxwell reads the name wrongly,but the default memory clock... definately 1 nvidia gpu

#15 RE: dell 930m by Lost_N_BIOS 19.10.2018 14:41

avatar

Yes, probably Maxwell issue, since GPU-z does not show your BIOS as either of the other two similar versions. Or could be Dell is lazy and used something from an Acer file?
I checked the file with hex via string and Unicode nothing mentions Acer, but it could be called via some manufacture ID via hex code, this could be what Dell left or just as mentioned Maxwell error/issue

I was not sure on that 1000 memory either, just assumed maybe it's reading it wrong or something, all three Nvidia vBIOS have that 1001 memory speed when opening, and all say Acer (All also have 928 TDP and 941 Boost)

Xobor Forum Software von Xobor
Datenschutz