Page 11 of 30
#151 RE: Asmedia 104x USB 3.0 firmware by xelanaiznac 15.09.2015 12:37

guys, what do you think about asm104x firmware that can be found at station drivers?
ver 130201
is this the latest version?
or is better to stay with 130125?

#152 RE: Asmedia 104x USB 3.0 firmware by lordkag 15.09.2015 22:54

avatar

It has already been addressed with tests, that 130201_10_02_00 is neither for ASM1042, nor the last version. The last version for ASM1042 is 130125_00_02_00 and the last version for ASM1042A is 140124_10_10_04 posted by Fernando.

Speaking of ASM1042, I have found recently a 130125_00_02_01 version, that does appear to be an upgrade. I have also found for ASM1042A a version 130704_10_02_0D as opposed to regular 130704_10_02_01, but luckily Fernando has posted a newer one. The problem is it has been extracted from a mainboard, thus the header and footer is missing. I can reconstruct it, this time I know more about the difference between 1042 and 1042A. But I can't guarantee that it will work, nor do I know if it was a fix for that board alone. If I'm wrong, you won't be able to use your controller without a hardware re-flash.

#153 RE: Asmedia 104x USB 3.0 firmware by N6O7 16.09.2015 00:30

avatar

Zitat von lordkag im Beitrag #152
It has already been addressed with tests, that 130201_10_02_00 is neither for ASM1042, nor the last version. The last version for ASM1042 is 130125_00_02_00 and the last version for ASM1042A is 140124_10_10_04 posted by Fernando.

Speaking of ASM1042, I have found recently a 130125_00_02_01 version, that does appear to be an upgrade. I have also found for ASM1042A a version 130704_10_02_0D as opposed to regular 130704_10_02_01, but luckily Fernando has posted a newer one. The problem is it has been extracted from a mainboard, thus the header and footer is missing. I can reconstruct it, this time I know more about the difference between 1042 and 1042A. But I can't guarantee that it will work, nor do I know if it was a fix for that board alone. If I'm wrong, you won't be able to use your controller without a hardware re-flash.


That's great news for a refreshed 1042 version!

#154 RE: Asmedia 104x USB 3.0 firmware by gpvecchi 21.09.2015 22:56

avatar

ASMedia 3.1 USB is 1142, while USB 3.0 is 1042/A, right?

#155 RE: Asmedia 104x USB 3.0 firmware by allindaze 22.09.2015 07:11

Zitat von lordkag im Beitrag #36




Hello @lordkag

What bios analyzation tool is that?

#156 RE: Asmedia 104x USB 3.0 firmware by imsims 22.09.2015 23:57

just to confirm that i successfully update my as1042 on asus x79 mb with this usefull 3d.

is there a changelog of various firmware release?

everything seems ok befor with 2012 firmware and with this 2013.

but uptodate is alwasys good :D

#157 RE: Asmedia 104x USB 3.0 firmware by vmanuelgm 14.10.2015 13:14

avatar

Hi guys.

I have just ran d.bat in my system with Rampage V Extreme x99, and this is the result:





May I update it???

If so, which files must I use and which is the procedure???


Thanks in advance.

#158 RE: Asmedia 104x USB 3.0 firmware by gpvecchi 26.10.2015 22:37

avatar

I just bought an AsRock USB 3.1 front panel (with sata express connector), that appears to be an AsMedia 1142; as it's a brand new product it could have a new firmware: how can I check/dump it?

#159 RE: Asmedia 104x USB 3.0 firmware by tom5151 02.11.2015 21:02

Hi guys,
I have an Asus-X79 Deluxe MB, the USB3 controller is an asmedia 1042a.
I have issues with my usb3, so I would like to update this controller.
Unfortunately, I'm not able to backup or update the firmware.
I can launch 104xfwdl /d, but I'm not abble to launch 104xfwdl /a, I have a "Read from id failed..." message.
Any help would be appreciate.

|addpics|1yk-1-e8ec.jpg,1yk-2-3992.jpg|/addpics|

#160 RE: Asmedia 104x USB 3.0 firmware by lordkag 02.11.2015 21:29

avatar

This sounds like the chip is not in the list of supported IDs. What package did you run, so I can verify what version of flasher it has? The first post of this thread has a newer flasher that should work for all ASM104x variations. But be very careful not to flash it on ASM1042 controllers, only on ASM1042A controllers. The latest firmware for your controller has been uploaded by Fernando and there is an already made package in this post.

#161 RE: Asmedia 104x USB 3.0 firmware by tom5151 02.11.2015 22:22

I've tried this package: f13t375p5588n7.rar which contains testDOS.bat and testWIN.bat.
All of them fail !
I don't want to flash as long as I'm not able to backup my current firmware ;)
EDIT: I've just tried with Fernando's package but no way, the /a command fails with the same message than the attached one.

#162 RE: Asmedia 104x USB 3.0 firmware by Fernando 03.11.2015 18:07

avatar

Zitat von tom5151 im Beitrag #161
I've just tried with Fernando's package but no way, the /a command fails with the same message than the attached one.
Which one of "my" packages do you mean?

#163 RE: Asmedia 104x USB 3.0 firmware by tom5151 03.11.2015 19:06

Zitat von Fernando im Beitrag #162
Which one of "my" packages do you mean?


Oh sorry, it's not yours, it's the link indicated by @lordkag, I mean this one, post #90

#164 RE: Asmedia 104x USB 3.0 firmware by Wam7 03.11.2015 19:52



This is a picture of the ASmedia chipset on my Asus X79 Sabertooth. Which is the latest firmware that I can flash?

#165 RE: Asmedia 104x USB 3.0 firmware by D2theZ 05.11.2015 18:54

@lordkag

Zitat von lordkag im Beitrag #152
Speaking of ASM1042, I have found recently a 130125_00_02_01 version, that does appear to be an upgrade.


Do you plan on posting this and making it available for us to update to?

Xobor Forum Software von Xobor
Datenschutz