Page 6 of 8
#76 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by infuscomus 25.10.2019 11:10

@bundyboy

try disabling devices in BIOS, see if that gets rid of the IRQ error.

#77 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 25.10.2019 11:43

@infuscomus:
what devices ? for example ?
Thanks

#78 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by infuscomus 25.10.2019 11:55

@bundyboy

everything except graphics, SATA and PS/2 ports.

#79 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 25.10.2019 12:00

ok. i will try that on monday, and will post the results.
I hope it will work :)

tnx

#80 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 28.10.2019 11:17

@infuscomus:
hi :)
i have successfully installed windows xp sp3

now again i enabled all devices in bios, and everything is ok.
except i need drivers for ethernet, usb 3.0 and for gpu.
where i can find drivers ? or do you have maybe ?

and one other thing, i have installed EasyBCD 2.4 on windows 10 which is installed on other hard drive
and there sellected this:
https://prnt.sc/pp27rx
but for some reason when i select windows xp it wont work... it gives error
while when i select hard drive for windows xp in bios. then it normally works.
how to make dual boot option ?

Thank you again :)

#81 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by infuscomus 28.10.2019 12:06

@bundyboy
for XP
bootloader path: \ntldr

for USB 3.0 try
https://www.win-unattended.de/Benutzer/F....5.3%20WHQL.rar

try nvidia.com or amd.com for GPU driver

try realtek.com for lan driver

#82 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 28.10.2019 12:22

@infuscomus:
Hi,
Ok. i will try them now.
but it's weird that USB 2.0 is not working also. as my motherboard has two USB 2.0 ports, and all other ports are USB 3.0...
my motherboard is Asus PRIME A320M-K
in fact I only need USB drivers, nothing else.

tnx

#83 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by infuscomus 28.10.2019 12:25

@bundyboy

what they don't tell you nowadays is that USB 2.0 ports are connected to the USB 3.0 controller on the motherboard, so you still need the USB 3.0 controller driver to use the USB 2.0 ports.

#84 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 28.10.2019 12:27

@infuscomus:
ok :(
i am going to try this drivers for usb.
can you suggest also some other ?
tnx

#85 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 28.10.2019 13:01

Drivers for usb not working :(

What can i do now ?

#86 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by infuscomus 28.10.2019 13:13

@bundyboy

can you grab the Hardware IDs for your USB 3.0 controllers?

#87 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 28.10.2019 13:56

@infuscomus

yes.

here are screenshoots from windows 10:








Also if I can't find the drivers at all....

can I buy this: https://www.aliexpress.com/item/32999965...rchweb201603_55

this PCI Express has own controller and everything, right ? as is says that it works with windows xp.

so in other words i need only to connect it to motherboard ?

tnx

#88 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by infuscomus 28.10.2019 14:22

@bundyboy

the 43BC controller should work with the 1.0.5.3 driver I mentioned earlier.

for the 145F controller there is this hacked etron driver that might possibly work (i have not tested it for myself)

that pci-e card should work for XP, i think it uses a VIA chipset.

#89 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 28.10.2019 14:51

@infuscomus

i will try this driver now.

and as for pci-e card, it says: Support Windows XP / Vista /Win7/8/10 Server 2008 or later

so in worst case i will buy this pci-e card

tnx

#90 RE: [Guide] Integration of AMD's AHCI/RAID drivers into a WinXP/W2k3 CD by bundyboy 29.10.2019 15:01

@infuscomus

i have successfully installed the usb drivers with 1.0.5.3 driver you mentioned earlier.
I only needed unistall usb devices from device manager, and again install drivers. now they are working :)

also if you can suggest maybe driver for XFX RX 570 8GB GDDR5 ? i have full hd resoultion, but without driver,

it lags when i move window from point to another...

I want to thank you again for your help

Xobor Forum Software von Xobor
Datenschutz