Page 98 of 150
#1456 RE: Recommended AHCI/RAID and NVMe Drivers by Wontell 09.05.2019 23:56

Would you recommend using that Open source NVMe driver for modern device like Corsair MP510 2Tb and HP EX950 and EX920?
So far the only offical and good driver i have is for my 480Gb Optane drive, all others relay on Windows or Intel if you switch RST mode to ON in bios

#1457 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 10.05.2019 10:33

avatar

Zitat von Wontell im Beitrag #1456
Would you recommend using that Open source NVMe driver for modern device like Corsair MP510 2Tb and HP EX950 and EX920?
No, I would prefer the generic MS NVMe driver.

#1458 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 18.05.2019 19:33

avatar

Update of the start post
Changelog:

  • new: Western Digital/HGST NVMe Drivers:
    • 64bit WD/HGST NVMe Driver v3.0.1902.40413 WHQL dated 02/04/2019
    • WD/HGST NVMe Drivers Installer Set v3.0.1902.40413 dated 03/26/2019
    • These NVMe drivers have been designed for Windows Server Operating Systems from 2008 R2 up, but may work with Win7-Win10 as well.
      Supported are the WD/HGST NVMe Controllers with the HardwareIDs PCI\VEN_1C58&DEV_0023 and PCI\VEN_15B7&DEV_2001.
      Thanks to our Forum member zombiekil for the source links.

Regards
Dieter (alias Fernando)

#1459 RE: Recommended AHCI/RAID and NVMe Drivers by Arctucas 27.05.2019 18:44

Fernando,

I have managed to get Win 7 X64 installed on a Z390 motherboard, but I cannot get any Intel Rapid Storage Storage Technology drivers to install.

Do you know of any modded (or could you mod any) IRST drivers that will install?

Any help would be greatly appreciated.

Thanks

#1460 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 27.05.2019 19:30

avatar

@Arctucas:
Windows 7 needs the additional SCSI filter driver named iaStorF.sys, which is present within all Intel RST(e) driverpacks. You should be able to get any Intel RST(e) driver up to the v15 platform installed while running Win7 (only the Intel RST v16 and v17 platform drivers cannot be used, because the SCSI filter driver is missing).
If you don't want to use any of my mod+signed drivers, you can install even the original driver, but in this case you have to force the installation by using the "Have Disk" option.

#1461 RE: Recommended AHCI/RAID and NVMe Drivers by Arctucas 27.05.2019 22:48

Fernando,
I got your modded Universal 64bit Intel RST Software v15.9.4.1041 to install, sort of.

It gave an error "Could not write value IsSystemOnBattery to key \System\CurrentControSet\Services\iaStorAC\Parameters\Device. Verify that you have sufficient access to that key, or contact your support personnel."

I chose Ignore and it continued until it gave another error "Service 'Intel(R) Rapid Storage Technology' (IAStorDataMgrSvc) failed to start. Verify that you have sufficient privileges to start system services."

I am running an administrator account.

It does appear to have installed the files in C: > Program Files > Intel > Intel(R) Rapid Storage Technology.

After restart, the RST icon does appear in the system tray, but the IRST service is not running, and when I try to manually start it, I get the error "Windows could not start the Intel(R) Rapid Storage Technology service on Local Computer. Error 1067: The process terminated unexpectedly."

Also, clicking on the IAStorUI.exe gives another error, "The Intel Rapid Storage Technology driver is missing or has not been installed properly."

Any thoughts?
Thanks again

#1462 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 27.05.2019 23:17

avatar

@Arctucas:
Since within this Forum there is already a thread available, which covers your request, I have moved your problem and the related discussion into it and hope, that this is ok for you.
Now to your problem:
To be able to help you, I need the following information:
1. With which SATA mode (AHCI or RAID) do you use the on-board Intel SATA Controller?
2. Which are the HardwareIDs of the Intel SATA Controller (right-click onto it > "Properties" > "Details" > "Property" > "HardwareIDs")?
3. Did you install the Windows-Feature MS .NET Framework 3.5, before you installed the Intel RST(e) Drivers & Software Set?

#1463 RE: Recommended AHCI/RAID and NVMe Drivers by Arctucas 29.05.2019 01:55

Fernando,

No problem, you can move it to where ever it needs to be.

1. As I cannot get Windows installed to a RAID array, I have AHCI set in BIOS.
2. PCI\VEN_1B21&DEV_0612&SUBSYS_10601B21&REV_02.
3. .NET was installed first.

#1464 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 29.05.2019 09:54

avatar

@Arctucas:

Zitat von Arctucas im Beitrag #1109
1. As I cannot get Windows installed to a RAID array, I have AHCI set in BIOS.
Have you created any RAID array? If yes, to which on-board SATA ports (Intel or ASMedia) are the members of the RAID array connected?
Zitat von Arctucas im Beitrag #1109
2. PCI\VEN_1B21&DEV_0612&SUBSYS_10601B21&REV_02.
These are the HardwareIDs of an "Asmedia 106x SATA Controller" and not of any Intel one.

#1465 RE: Recommended AHCI/RAID and NVMe Drivers by Arctucas 29.05.2019 23:22

Fernando,

I must apologize, I obviously neglected to mention I have two Samsung 960EVO nvme M.2 drives.

#1466 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 30.05.2019 10:26

avatar

@Arctucas:
PCIe/M.2 connected NVMe SSDs need other drivers than SATA connected ones.
Why did you try to get any of my modded Intel AHCI/RAID drivers installed and why did you install the Intel RST Software?

#1467 RE: Recommended AHCI/RAID and NVMe Drivers by Arctucas 30.05.2019 23:13

Zitat von Fernando im Beitrag #1114
@Arctucas:
PCIe/M.2 connected NVMe SSDs need other drivers than SATA connected ones.
OK, which drivers do I need?

#1468 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 31.05.2019 08:12

avatar

Zitat von Arctucas im Beitrag #1115
which drivers do I need?
It depends on the HardwareIDs of the NVMe Controller and the OS you are running.

#1469 RE: Recommended AHCI/RAID and NVMe Drivers by Arctucas 31.05.2019 23:24

Device Manager says Samsung NVMe controller PCI\VEN_144D&DEV_A804&SUBSYS_A801144D&REV_00.
Driver version: 3.0.0.1802.
W7Ux64 SP1.

#1470 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 01.06.2019 12:16

avatar

@Arctucas:
Since you are/were obviously unsure, to which Storage Controller your system drive is connected, I have moved the related discussion into this universally valid "Storage Drivers" thread.

Zitat von Arctucas im Beitrag #1469
Device Manager says Samsung NVMe controller PCI\VEN_144D&DEV_A804&SUBSYS_A801144D&REV_00.N
Driver version: 3.0.0.1802, W7Ux64 SP1.
This means, that you are already using the best matching NVMe driver for single (nor RAIDed) Samsung NVMe drives.
Nevertheless I still do not really know, why you were talking about AHCI and RAID and what the "Asmedia 106x SATA Controller" has to do with your requests.
You had written, that you have connected 2 Samsung 960 EVO NVMe SSDs to your mainboard, but didn't answer my question, whether you have created any RAID array (look >here<). If the answer should be "Yes!", you may have to use a completely different driver (depending on the sort of RAID array you had created).

Xobor Forum Software von Xobor
Datenschutz