Page 95 of 148
#1411 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 02.03.2019 17:50

avatar

@mescalito2:
The MS NVMe Hotfix for Win7 can be found within the start post of this thread and the integration into the Win7 image can be done by using a tool like NTLite.

#1412 RE: Recommended AHCI/RAID and NVMe Drivers by mescalito2 02.03.2019 18:05

Thanks,
I'll try installing the hotfix.

Also, by any chance do you know why I got an error message when using UEFI "Secure Boot Violation Invalid Signature detected. Check secure Boot Policy in Setup"?

Thanks.

#1413 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 02.03.2019 19:08

avatar

@mescalito2:
If you want to boot off an NVMe SSD, you have to DISABLE the "Secure Boot" option within the BIOS.

#1414 RE: Recommended AHCI/RAID and NVMe Drivers by JanCerny 03.03.2019 02:11

avatar

Please write warning to Marvell 91xx + 92xx SATA3 AHCI driver v1.2.0.1049 WHQL for Win7-8
With this driver is SSD recognized as an HDD on Windows 7. Command 'winsat formal' doesn't help. It is recommended to manually disable defragmentation.

#1415 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 03.03.2019 12:22

avatar

@JanCerny:
Thanks for your interesting report.
Following your advice I have added the related info to the start post of this thread.

#1416 RE: Recommended AHCI/RAID and NVMe Drivers by Runee 06.03.2019 16:59

I baught a Trandscend M.2 NVMe 512GB SSD. Win 7 installation can't detect it. Can't find driver for Trandscend NVMe. MS hotfix discontinued, that what it says in MS support page. How do I install win 7 on Trandscend M.2 NVMe 512GB SSD. where do I get Trandscend NVMe SSD driver for win 7? Win 10 works fine on it.

My System
Motherboard Asrock B250 fatality Gaming K4
Core i& 7700
16GB DDR4 Ram
Gigabyte 5500 Series Graphics
Any help appreciated

#1417 RE: Recommended AHCI/RAID and NVMe Drivers by agentx007 06.03.2019 17:11

Second post : LINK

#1418 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 06.03.2019 19:26

avatar

@Runee:
Welcome to the Win-RAID Forum!

Our Forum member agentx007 is right. The second post of this thread contains the requested MS NVMe Hotfix for Win7, which has been removed by Microsoft from its websites.
Furthermore your problem is a general one for Win7 users and has nothing to do with the in-use NVMe SSD manufacturer and model.
You should integrate the NVMe Hotfix into the BOOT.WIM and INSTALL.WIM of the Win7 image by using a tool like NTLite.

Good luck!
Dieter (alias Fernando)

#1419 RE: Recommended AHCI/RAID and NVMe Drivers by JanCerny 09.03.2019 18:07

avatar

Zitat von Fernando im Beitrag #1415
@JanCerny:
Thanks for your interesting report.
Following your advice I have added the related info to the start post of this thread.
I just test driver version for Windows 10 on Windows 10 1809. Kingston KC300 is detected correctly as SSD. Have you idea how disable SATA hotplug?

#1420 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 09.03.2019 18:21

avatar

Zitat von JanCerny im Beitrag #1419
Have you idea how disable SATA hotplug?
Uncheck the option "Enable safely remove disk", click onto "OK" and reboot.
Alternatively you may use a tool like "HotSwap!".

#1421 RE: Recommended AHCI/RAID and NVMe Drivers by JanCerny 09.03.2019 18:50

avatar

Windows 10 driver doesn't have this option.

edit: solution for all Marvell 88SE91xx controllers
https://www.overclock.net/forum/320-raid...ml#post23336914

1
2
3
 

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e97b-e325-11ce-bfc1-08002be10318}]
"EnumPropPages32"="mv91xxm.dll,ESATAPortPropPageProvider"
 

#1422 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 09.03.2019 19:34

avatar

Zitat von JanCerny im Beitrag #1421
Windows 10 driver doesn't have this option.
The HardwareIDs depend on the related device and not on the OS or the in-use driver.
You can easily find out the HardwareIDs of your on-board Intel SATA AHCI Controller by running the Device Manager, expanding the "IDE ATA/ATAPI Controllers" section, doing a right-click onto the listed AHCI Controller (may be named "Standard AHCI Controller") and choosing the options "Properties" > "Details" > "Property" > "HardwareIDs".

#1423 RE: Recommended AHCI/RAID and NVMe Drivers by sinan 20.03.2019 10:33

avatar

Hello Fernando and all

I need to install windows 7 in Dell PowerEdge T130
what Recommended AHCI/RAID and NVMe Drivers should i use ?

Thanks

#1424 RE: Recommended AHCI/RAID and NVMe Drivers by Fernando 20.03.2019 11:04

avatar

@sinan:
Welcome to the Win-RAID Forum!
The choice of the "best" storage driver doesn't depend on the model name, but on the chipset and the SSD/HDD configuration of the system.
Please run the Device Manager, expand the "IDE ATA ATAPI Controllers" and "Storage Controllers" sections and tell me the names of the listed Controllers.
Regards
Dieter (alias Fernando)

#1425 RE: Recommended AHCI/RAID and NVMe Drivers by King Crimson 20.03.2019 13:12

avatar

I'm trying to install Windows 7 on a Samsung 970 EVO NVMe M.2 SSD.
I'm currently failing to properly load the driver (I think?) during the installation process. I used MSI smart tools to create an image of my Windows 7 DVD and to integrate the necessary drivers from MSI's site (It didn't properly finish though, it got stuck on the last step but apparently it works.) Then I used ntlite to integrate the two necessary Win7 updates into the image as well as the Samsung NVMe driver for Win7 64bit from this thread. Now apparently it doesn't load the integrated driver, so I copied the "pure" files onto my USB stick and loaded them manually during the installation process when asked. Now the peculiar thing is, before loading the driver, the SSD is visible in the list of selectable Drives for installation, but as soon as the driver is loaded it disappears from there.
Now I'm not quite sure what to do to resolve this problem, maybe you know what the problem might be?

Motherboard: MSI B450 Gaming Pro Carbon AC
CPU: AMD Ryzen 7 2700X

Xobor Forum Software von Xobor
Datenschutz