Page 8 of 97
#106 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by Khaela 23.09.2017 23:21

I have Gaming 5

#107 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by orondf343 24.09.2017 00:00

I have a Gaming 5

#108 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by ket 24.09.2017 00:08

avatar

Zitat von feathers632 im Beitrag #105
Zitat von ket im Beitrag #104
Who has a B350 Gigabyte board and who has a Gaming 5? I'm not going to say what I'm up to just yet but lets call it.. "new toys".



I'm pretty sure I have a gaming 5.

:)


Check your PMs in a few mins ;)

#109 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by Gigawits 24.09.2017 00:34

The powerplan (ryzen and highperformance) sets minimum cpupower at 100% set that at 20% and it throttles down

#110 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by R-T-B 24.09.2017 09:18

Gaming 5 here as well.

Any odd chance of getting ATA security unlock support added to the bios? I'd actually donate like 25 bucks for that (would do more, but unfortunately, I am pretty darn broke at the moment, heh).

I have tried my hand at it but you seem far more skilled. I do however know how to get around the sig check (with a hex editor) in file so you can q-flash things if you care to PM me.

#111 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by neikosr0x 24.09.2017 11:20

i have a gaming 5 as well

#112 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by PickMeNow 24.09.2017 16:45

I have Gaming 5 as well

#113 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by ket 25.09.2017 14:11

avatar

Ok guys what I've been doing is coming along quite well I just have to make a few more changes and do some testing then I'll release what I've been doing which I guess people would call reverse engineering but I just call it modding :p

#114 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by CRCinAU 25.09.2017 17:38

I just joined to say thanks for your efforts so far.

I have a AB350 Gaming 3 - to which I flashed your version of F9d. When I enter the BIOS and go to Peripherals -> CPU Configuration, I see lots of the PPC Configuration - which I assume are the slots to pick the Pstates.

If I try to select P0 -> P7 from the top to bottom entries, the selection never changes from P0.

Am I doing something wrong? bug? Missing something simple?

#115 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by ket 25.09.2017 17:54

avatar

Zitat von CRCinAU im Beitrag #114
I just joined to say thanks for your efforts so far.

I have a AB350 Gaming 3 - to which I flashed your version of F9d. When I enter the BIOS and go to Peripherals -> CPU Configuration, I see lots of the PPC Configuration - which I assume are the slots to pick the Pstates.

If I try to select P0 -> P7 from the top to bottom entries, the selection never changes from P0.

Am I doing something wrong? bug? Missing something simple?


I can't really comment as I don't have a Gaming 3 but there has been a lot of chatter in the thread that in order to get P-States to work you need to use an odd multiplier and change the CPU power states in the Windows power plan profiles to have the CPU throttle up and down as it should. Seems like AMD have a few quirks to fix in their AGESA code still to me.

#116 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by CRCinAU 25.09.2017 18:08

I'm not quite sure what you mean here.... The Windows Power Plan Profiles?

I mainly use Linux on this system - however I notice that in the Node Info menu, it says the CPU is 2.2Ghz -> 3.4GHz... My CPU is a 1700x - it has build date 1705 if that matters...

Looking at the ZenStates tool, I see:

1
2
3
4
5
6
7
8
9
10
11
 
# ./zenstates.py -l
P0 - Enabled - FID = 88 - DID = 8 - VID = 20 - Ratio = 34.00 - vCore = 1.35000
P1 - Enabled - FID = 78 - DID = 8 - VID = 2C - Ratio = 30.00 - vCore = 1.27500
P2 - Enabled - FID = 84 - DID = C - VID = 68 - Ratio = 22.00 - vCore = 0.90000
P3 - Disabled
P4 - Disabled
P5 - Disabled
P6 - Disabled
P7 - Disabled
C6 State - Package - Enabled
C6 State - Core - Enabled
 



This seems somewhat strange.

I also note that the AGESA version seems to say 1.0.0.6 - not 1.0.0.6b (if that makes any difference?) that is supposed to be in the stock gigabyte F9d bios...

If I enable the p-states via the software script, I can get it to show:

1
2
3
4
5
6
7
8
9
10
11
 
# ./zenstates.py -l
P0 - Enabled - FID = 94 - DID = 8 - VID = 20 - Ratio = 37.00 - vCore = 1.35000
P1 - Enabled - FID = 88 - DID = 8 - VID = 2C - Ratio = 34.00 - vCore = 1.27500
P2 - Enabled - FID = 78 - DID = 8 - VID = 38 - Ratio = 30.00 - vCore = 1.20000
P3 - Enabled - FID = 70 - DID = 8 - VID = 3A - Ratio = 28.00 - vCore = 1.18750
P4 - Enabled - FID = 68 - DID = 8 - VID = 40 - Ratio = 26.00 - vCore = 1.15000
P5 - Enabled - FID = 60 - DID = 8 - VID = 48 - Ratio = 24.00 - vCore = 1.10000
P6 - Enabled - FID = 58 - DID = 8 - VID = 68 - Ratio = 22.00 - vCore = 0.90000
P7 - Enabled - FID = 48 - DID = 8 - VID = 78 - Ratio = 18.00 - vCore = 0.80000
C6 State - Package - Enabled
C6 State - Core - Enabled
 



I've picked all these values manually - so no idea if they're optimal as yet.... I'm also not quite sure on how to tell if these are actually being used...

The Linux code to do this is at: https://github.com/r4m0n/ZenStates-Linux

On another note, if I boot into Windows 10 and use Ryzen Master, I do see the CPU freq scaling between 2.2 and 3.5GHz - occasionally peaking to 3.9GHz under certain conditions...

#117 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by ket 25.09.2017 18:45

avatar

Zitat von CRCinAU im Beitrag #116
I'm not quite sure what you mean here.... The Windows Power Plan Profiles?

I mainly use Linux on this system - however I notice that in the Node Info menu, it says the CPU is 2.2Ghz -> 3.4GHz... My CPU is a 1700x - it has build date 1705 if that matters...

Looking at the ZenStates tool, I see:

1
2
3
4
5
6
7
8
9
10
11
 
# ./zenstates.py -l
P0 - Enabled - FID = 88 - DID = 8 - VID = 20 - Ratio = 34.00 - vCore = 1.35000
P1 - Enabled - FID = 78 - DID = 8 - VID = 2C - Ratio = 30.00 - vCore = 1.27500
P2 - Enabled - FID = 84 - DID = C - VID = 68 - Ratio = 22.00 - vCore = 0.90000
P3 - Disabled
P4 - Disabled
P5 - Disabled
P6 - Disabled
P7 - Disabled
C6 State - Package - Enabled
C6 State - Core - Enabled
 



This seems somewhat strange.

I also note that the AGESA version seems to say 1.0.0.6 - not 1.0.0.6b (if that makes any difference?) that is supposed to be in the stock gigabyte F9d bios...

If I enable the p-states via the software script, I can get it to show:

1
2
3
4
5
6
7
8
9
10
11
 
# ./zenstates.py -l
P0 - Enabled - FID = 94 - DID = 8 - VID = 20 - Ratio = 37.00 - vCore = 1.35000
P1 - Enabled - FID = 88 - DID = 8 - VID = 2C - Ratio = 34.00 - vCore = 1.27500
P2 - Enabled - FID = 78 - DID = 8 - VID = 38 - Ratio = 30.00 - vCore = 1.20000
P3 - Enabled - FID = 70 - DID = 8 - VID = 3A - Ratio = 28.00 - vCore = 1.18750
P4 - Enabled - FID = 68 - DID = 8 - VID = 40 - Ratio = 26.00 - vCore = 1.15000
P5 - Enabled - FID = 60 - DID = 8 - VID = 48 - Ratio = 24.00 - vCore = 1.10000
P6 - Enabled - FID = 58 - DID = 8 - VID = 68 - Ratio = 22.00 - vCore = 0.90000
P7 - Enabled - FID = 48 - DID = 8 - VID = 78 - Ratio = 18.00 - vCore = 0.80000
C6 State - Package - Enabled
C6 State - Core - Enabled
 



I've picked all these values manually - so no idea if they're optimal as yet.... I'm also not quite sure on how to tell if these are actually being used...

The Linux code to do this is at: https://github.com/r4m0n/ZenStates-Linux

On another note, if I boot into Windows 10 and use Ryzen Master, I do see the CPU freq scaling between 2.2 and 3.5GHz - occasionally peaking to 3.9GHz under certain conditions...




As everything is working in Windows it would seem that the problem is with Linux. I don't use Linux so you would need to deferre to someone who does to troubleshoot that issue. I noticed what should be AGESA 1.0.0.6b as just 1.0.0.6 as well. Either someone at Gigabyte used the wrong AGESA code base, or someone at AMD forgot to put the "b" at the end. I just assumed the latter rather than the former as the former is a step too incompetent even for Gigabyte.

#118 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by Hilppari 25.09.2017 23:44

Hi i have Gigabyte AB350M Gaming 3. Any love coming for the matx boards?

#119 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by ket 26.09.2017 04:01

avatar

Zitat von Hilppari im Beitrag #118
Hi i have Gigabyte AB350M Gaming 3. Any love coming for the matx boards?


That depends I don't know which modded UEFIs are the most popular, boards people don't seem to be buying I'll drop mod support for and possibly start doing other UEFIs people request. I'll see if I can post a poll or something for people to vote on.

#120 RE: [OFFER] Gigabyte GA-AX370-Aorus Gaming 5 BIOS mod by ket 26.09.2017 14:12

avatar

Reverse engineered UEFI for the Gaming 5 is now available, see post #2.

Xobor Forum Software von Xobor
Datenschutz