#1 PROBLEM WITH A RAID 0 2X SAMSUMG NVME 950 PRO- MB MSI Z170A GAMING M9 ACK(BIOS 1.8 -lastest) - ROM INTEL RST 14.8.0.2377 by eduaf1 17.09.2016 19:42

Hi Fernando and everyone!
I have some problems with my MB.
Recently i buy a more one samsung 512gb nvme 950 pro, for make a raid 0 for other.
In AHCI the two ssd works fine!
But i set for RAID 0 on first reboot the oc dont boot. After force a shutdown, i can set the raid 0 and select the ssd...
But when the problem is when i select the driver for RST i get the same error 0x8007054

The problem is wth my version of rom? That is 14.8.02377
Someone can help?

Thxs!

#2 RE: PROBLEM WITH A RAID 0 2X SAMSUMG NVME 950 PRO- MB MSI Z170A GAMING M9 ACK(BIOS 1.8 -lastest) - ROM INTEL RST 14.8.0.2377 by Fernando 17.09.2016 19:58

avatar

@eduaf1:
Welcome at Win-RAID Forum!

It is not easy to help you, because your photos do not show all required details. Why haven't you taken screenshots and attached them? It should be even possible from within the UEFI BIOS (F12?).
Nevertheless I found something, which you have done the wrong way: You didn't unplug all other disk drives except the M.2 modules before beginning to create the RAID0 array.
The LEGACY mode Intel RAID ROM version doesn't really matter, because the Intel RST RAID Utility uses the EFI RAID module named "RaidDriver" (previous name: "SataDriver").
By the way: >Here< is a video about how to create a RAID0 array with 2 Samsung 950 Pro M.2 SSDs.

Regards
Dieter (alias Fernando)

#3 RE: PROBLEM WITH A RAID 0 2X SAMSUMG NVME 950 PRO- MB MSI Z170A GAMING M9 ACK(BIOS 1.8 -lastest) - ROM INTEL RST 14.8.0.2377 by eduaf1 17.09.2016 20:09

Hi Fernando! Thanks for your reply!
Can be more easy in Spanish... but here we go...

The photo i have shot of my cellphone thats the question? You need more quality of images?
I see this video a lot! And i sure all in this video i maked...
Sorry for my bad english...
i dont unplug any hdd ou dvd drive, when a i make the raid... i need this?
Thks!!!
Best regards

#4 RE: PROBLEM WITH A RAID 0 2X SAMSUMG NVME 950 PRO- MB MSI Z170A GAMING M9 ACK(BIOS 1.8 -lastest) - ROM INTEL RST 14.8.0.2377 by Fernando 17.09.2016 20:36

avatar

Zitat von eduaf1 im Beitrag #3
I see this video a lot! And i sure all in this video i maked...
I am sure, that you didn't unplug all disk drives, although it is mentioned in the video to do it.

Zitat
i dont unplug any hdd ou dvd drive, when a i make the raid... i need this?

It may be not absolutely needed, but it is recommended to do it to avoid any problem.

#5 RE: PROBLEM WITH A RAID 0 2X SAMSUMG NVME 950 PRO- MB MSI Z170A GAMING M9 ACK(BIOS 1.8 -lastest) - ROM INTEL RST 14.8.0.2377 by eduaf1 18.09.2016 02:01

Thanks so much!!!
The hdd having some trouble for detect raid on OS installation!
I need make a new installation, but the raid 0 works fine!!!
Best regards!!!
You are the BEST!!!

Xobor Forum Software von Xobor
Datenschutz