Page 73 of 73
#1081 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by vertx 12.05.2021 22:29

hello, finnaly i have loaded the 43D2/43DE/43D6 driver with F6 menu, but i still have d e0x0000007b error, maybe due to usb driver ? the only one who work is the 5.0.5.55 but i only have de x64 version ... can't use it with 32bits XP

#1082 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 12.05.2021 22:38

avatar

@vertx:

Zitat von vertx im Beitrag #1081
i still have d e0x0000007b error, maybe due to usb driver ? the only one who work is the 5.0.5.55 but i only have de x64 version ... can't use it with 32bits XP
Look >here< for a solution.

#1083 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by vertx 13.05.2021 16:56

Finally i have find a method, start installation with win PE on other computer then put the drive on z590 to finish it... but no usb...

#1084 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 13.05.2021 18:53

avatar

@vertx: Thanks for the feedback - it is fine, that you finally succeeded.
Which specific AHCI driver did you use for the final XP Setup and did you integrate of load it via F6?

#1085 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by vertx 13.05.2021 19:51

I have using the latest driver you given,
For installation i using a rescue OS (windows PE3.1). Actually only 64 bit version work because of usb driver issue.

Need 32bit driver to finish it.

#1086 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 13.05.2021 21:26

avatar

@vertx:

Zitat von vertx im Beitrag #1081
hello, finnaly i have loaded the 43D2/43DE/43D6 driver with F6 menu, but i still have d e0x0000007b error
You should only load 1 driver (the correct one, which supports the DeviceID of your on-board Intel SATA Controller).
By the way - where is the faulty txtsetup file?

#1087 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by vertx 13.05.2021 22:48

that was a just load error, when load driver with firadisk no error

#1088 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by vertx 19.05.2021 18:13

finnaly i did it, using this driver with acpi files from ogs + mcs9990 usb 2.0 to pcie adapter with driver.
installation done on sata thank to the ahci driver on the first post.

to install it i used WinSetupFromUSB-1-9 with drivers ahci in .ima file for F6 menu.

after installation i just put acpi files in drivers folder.

#1089 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by infuscomus 20.05.2021 03:56

@vertx

Nicely done!

If you ever want to give windows 98 a try I can confirm that the mcs9990 usb 2.0 to pcie adapter works just fine in 98.

#1090 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Zoe 25.05.2021 13:09

My Windows 2000 laptop succeeded with the installation, but then it gives out an Inaccessible Boot Device error.

Xobor Forum Software von Xobor
Datenschutz