Page 66 of 69
#976 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 29.03.2020 21:33

avatar

@infuscomus:
Yes, I have already given to minervamcdonalds the advice to boot off an optical drive instead.

#977 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by minervamcdonalds 30.03.2020 03:33

avatar

Zitat von Fernando im Beitrag #974
I bet, that you didn't use an untouched original Windows XP SP3 image.
The errors were persistent across all images that I've tested, all of the english ones sourced from Archive.org. The brazilian portuguese that I'm actually using was from another site, but again, behaved exactly as the others.
Zitat von infuscomus im Beitrag #975
If he is using a USB flash drive to try to do the install it would explain the 7B BSOD - you need a RAMdisk driver like Firadisk or WinVBlk for that to work.
And you have found the answer. Easy2boot got me the install not because of the drivers, but it actually loaded the image to RAM. Just tested it again, this time using no drivers at all, and the installer didn't crashed.
Zitat von infuscomus im Beitrag #975
It would also need to be a native USB 2.0 port, USB 3.0 won't work at all for XP install (as I discovered)
The Optiplex 745 have only 2.0 ports, so this wouldn't be the cause. It's no surprise since the first Windows to support USB 3.0 natively was Windows 8. Vista or 7 would have also failed to install to 3.0 ports.

#978 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 07.04.2020 06:05

Hi,

I've got an XP32 install on an X99 board but the device manager won't show the CPU's with the + sign to expand with all the cores and threads__everything else in the install is good apart from the CPU not showing in the device manager. Some advice is requested on how to overcome this - Thank you.

#979 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by infuscomus 07.04.2020 09:37

@fraz

you might have installed the single processor HAL - what is listed under computer in device manager?

#980 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 07.04.2020 10:54

@infuscomus:
Hi,
I tried ACPI Multi-Processor & ACPI PC - or similar - The board is AsRock X99 OC Formula 3.1 - i7 5820 K - The install is XP PRO 32 - Just the processor is missing now. I've done X64 XP (perfect)___but this X32 (X86)__is proving difficult__I'm really stuck at the moment at the final hurdle before imaging.

I do have Vista 32 install and XP64 if it is possible to "rip" the drivers out of the installs??? - I'm no expert so good advice is needed = Thanks
ACPI Multi Processor PC is listed under computer

#981 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by infuscomus 07.04.2020 12:15

@fraz
you cant use 64bit drivers on 32bit OSes and vice versa
check this is selected in task manager
View -> CPU History -> One Graph per CPU

#982 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 07.04.2020 13:21

Yes I can't use the 64 bit irst floppy & text mode on x86 (it shows as corrupted IA store)__
On xp64 there were no troubles with the cpu in device manager___i was thinking that maybe another text mode driver may be needed for this? - As when the XP32 installs there is nothing in device manager for the cpu with the + sign that expands to show the cores / threads.
I will check the CPU history but I don't think that will make the processor cores appear in device manager.

OK I did another install just to see for consistency - so still no cpu in device manager - In the task manager - one graph per CPU and it shows 12 threads which is normal.
Earlier on I tried HW MONITOR and only 1 core/1thread was showing.

I do think on X99_XP32 that something is missing (fwiw)__XP64 is better and has shown no problems in this way. It would be good to see if it is possible to get a MOD for this but this is beyond my capability currently unless someone pointed me in the right direction.
Someone here must know.
I was thinking along the lines of C:\Windows\system32\driver store ________somewhere in this area.
I do have the working install of Vista 32 on the same board so maybe the drivers/.inf files could be extracted? - I'll leave it with you to see what comes back but there isn't much else I can do at the moment - The install is close to perfection if this is dealt with !!!

#983 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 07.04.2020 13:36

avatar

@fraz:
Since the Device Management inclusive the detection of the connected CPU is task of the OS and exclusively managed by in-box MS drivers, your problem has nothing to do with the topic of this thread.

#984 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 07.04.2020 22:02

Zitat von Fernando im Beitrag #983
@fraz:
Since the Device Management inclusive the detection of the connected CPU is task of the OS and exclusively managed by in-box MS drivers, your problem has nothing to do with the topic of this thread.
Hello Fernando, you are correct__but I would appreciate being pointed in the direction of a solution if it is possible__if it is not possible then this install can be forgotten and scrapped but if it is possible I would like to complete the installation but a little help is needed.

Sorry for posting off topic - Thank you

#985 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 07.04.2020 22:32

avatar

@fraz:
Your problem can only be solved by one of our Windows XP Gurus. You can find and ask them >here<.
Good luck!

#986 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Ftmmsch 27.04.2020 00:42

Hello,

I have an older slipstraemed Xp, which i tried to install on an older panasonic cf-31 mk1
- which had original win 7 prof 64 bit installed.
I made two partititions with Gparted and installed successful win 7 prof 32 bit.
But, when i tried to install the earlier slipstremad xp prof 32 bit - failed - bluescreen.
Now i found this forum - and hopefully, there is now a better way to do it.

Problems:
1.) BIOS is locked - no password - i knew that, while i bought it from a US ebay seller.
2.) i asked the seller for installing XP - he said, that it isn't possible. Didn't ask why (leider)
3.) i don't know about restrictions from panasonic's hardware
4.) maybe, he said that, because he could not go into the BIOS - don't know
5.) i noticed about several modified intel drivers - but, i can't compare them with my hardware
6.) the only thing, i know - is: "Intel(R) 5 Series 6 Port SATA AHCI Controller"
7.) driver date: 17.12.2009 version: 9.5.6.1001 driver details: c:\Windows\system32\DRIVERS\jaStore.sys
8: Inf Name: oem9.inf INF-Abschnitt: iaStor_mobl_Inst
Kompatible IDs:
PCI\VEN_8086&DEV_3B2F&REV_06
PCI\VEN_8086&DEV_3B2F
PCI\VEN_8086&CC_010601
PCI\VEN_8086&CC_0106
PCI\VEN_8086
PCI\CC_010601
PCI\CC_0106

I found an - maybe - compatible driver on the interent - but, i guess that i should not use it.
Anyway: I don't know, which one i should take from all your list's

Kind Regards

EDIT 1:
on the beginning, i noticed:
"an original (untouched) OS Image with integrated latest Service Pack"
So, that means: Don't use a slipstreamed version?
My xp prof sp 2 - this one, i used or the earlier slipstreamed dvd, which i used in my older cf-19 mk2.
I changed settings in BIOS - it worked.
But now - in the cf-31 mk1 - i can't do that, because, the BIOS is locked - No password.
Again: I copied infos / data of my intel above.
I still don/t know, which one of your modified driver, i can use - if i can use them at all.

EDIT 2:
Sorry - I thing, that i have it now :-)
(wer Lesen kann, ist klar im Vorteil:-)
Under a.
I read: a)
For users with an Intel ICH7R/M, ICH9M, ICH10R/D, 5 Series, 6-Series or 7-Series (except X79) Southbridge AHCI or RAID system:
Because, I have an "Intel(R) 5 Series 6 Port SATA AHCI Controller,
I just can take the modified, which is listed under "5-Series" ?????????????
Maybe, I relally don't have to understand that :-)
I allways thought, that i have to use an EXACT driver, which is ONLY for my Intel......
(Egal - I'll try it)

EDIT 3:
Btw: I tried to run thel Intel® Driver- und Support-Assistent
Intel checked - if that really works! - and result: They didn't find anz supported driver or software
???????????????????????????????? I have a lot of Intel stuff on my cf-31 mk1 !!!!!
Firewall is deactivated
Does Intel give ALLWAYS give this Feedback? - even, when they - maybe - don't have access?

EDIT by Fernando: I have merged the 4 posts and removed a lot of blank lines to save space.

#987 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 27.04.2020 21:21

avatar

@ Ftmmsch:
Welcome to the Win-RAID Forum!
As you can read within chapter 1 point a) of the start post, I recommend for users with an Intel 5-Series chipset mainboard to integrate the original 32bit Intel RST driver v11.2.0.1006 WHQL.
When it comes to the textmode driver integration part of nLite's work you have to choose only the listed device named "Intel(R) 5 Series 6 Port SATA AHCI Controller" - thats all!
Good luck!
Dieter (alias Fernando)

#988 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by leoleo 12.05.2020 18:37

hey guys
i want to install Win XP 64x SP3 on:

Acer Aspire VN7-571G V1.14
Intel Core i5 4210U
North bridge : Intel Haswell-ULT
Revision ID: 0B
south bridge : Intel H8x/P8x
Revision ID: C1
ST1000LM014-1EJ164 von 931.51 GB SATA III
Firmware: SM25
SATA Version: SATA Rev 2.6
Serienno: W7706XPR

and still get 0x00000007B
Which of these drivers do I have to get? and do I have to use F6 in the installation?

Thank you
Leonhard

#989 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 12.05.2020 18:48

avatar

@leoleo:
Welcome to the Win-RAID Forum!
Since all your questions are answered within the start post of this thread, I have moved your post here.
You cannot use any of the latest Intel RST drivers, because none of them do support Windows XP. Furthermore the required file named txtsetup.oem is missing within Intel RST drivers, which are newer than v11.2.0.1006.
Regards
Dieter (alias Fernando)

#990 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 13.05.2020 20:57

Hello,

I'm going to be doing an XP64 on H170 & Z170 - Which is the best version of the floppy IRST driver to use? - On X99/Z97 it was 14.8.0.1042 - How about H170/Z170 for IRST?

Xobor Forum Software von Xobor
Datenschutz