Page 63 of 69
#931 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 17.10.2019 10:35

avatar

@gordo999:
The 0x000000A5 stop error is caused by a not matching ACPI setting resp. by the usage of a not compliant ACPI driver during the XP Setup and has nothing to do with the topic of this thread.
Please follow the advice of infuscomus .
By the way: If you want, that I get notified about your post, you should use my correct nickname (with a capital letter "F" at the beginning).

#932 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by gordo999 17.10.2019 12:13

Zitat von infuscomus im Beitrag #930
ask here
@infuscomus...thanks.

#933 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by gordo999 17.10.2019 12:19

Zitat von Fernando im Beitrag #931
Please follow the advice of infuscomus .
@Fernando...will do...thanks again.

#934 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by JAXIMUS 07.11.2019 00:35

avatar

Thank God I stumbled upon this forum via a google search as I've already spent a considerable amount of time and money trying to solve this problem...(posting on AW Arena forums & taking my PC into local shops)

Hopefully I'm posting in the best thread! This forum is slightly congested.

@Fernando

I am struggling to find a WIN XP 32bit AHCI driver for my laptop that will work -Alienware 17 (this is the R1 version) with the older Haswell chipset.

There very well may be just a simple solution to this and somewhere I'm doing something wrong -I mean its a very popular laptop i'm using. The AHCI driver I used is from driverpack solutions online. And the txtsetup.oem file I am using is from the RAID driver. (only one I could find).

I've tried both an integrated nLite CD I made and also a USB stick with a Floppy A Disk using the F6 command. No luck. (Using an EVO 860 SSD)

I have the BIOS mode set correctly and I'm choosing the right driver from the txtsetup.oem summary to my knowledge. All the files are in the root directory of the floppy disk and the files seem to load until I get stopped at the bsod.

I Also went ahead and took my system to a reputable computer shop who said after finding custom AHCI drivers online they were unable to load them correctly due to not having the exact hardware ID (DEV_8C3A)



I need this AHCI mode in order to utilize the trim feature of my SSD as I am also running Win 10 in a dual boot config.

I have done things much the same as in these tutorials over the years for other systems and have had good success.

As you say:
(Maybe because Intel didn't write the needed Hardware ID's into the related information file (with the suffix .INF). This is the reason why the latest Intel AHCI drivers cannot be installed onto AHCI systems with an ICH8R, ICH8M, ICH9R or ICH10R Southbridge).
Do I need a modified .inf/.oem file?

Anyway, any insight would be valued greatly!

I would be more then happy to send you a donation.

-Jack

#935 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 07.11.2019 00:55

avatar

@JAXIMUS:
Welcome to the Win-RAID Forum!
Please read carefully the start post of this thread. Then you will find the solution for your problem.
To find out the matching AHCI driver and Controller name you should know the HardwareIDs of the on-board Intel SATA AHCI Controller. You can check it from within Win10: Expand the "IDE ATA/ATAPI Controllers" section of the Device Manager, right-click onto the listed AHCI Controller and then choose the options "Properties" > "Details" > "Property" > "HardwareIDs". Interesting are only the VendorID (shouldd be VEN_8086 for Intel) and the DeviceID (DEV_XXXX).
I recommend to integrate the mod+signed "Universal 32bit Intel RST textmode driver v11.2.0.1006", because it supports all HardwareIDs of all Intel SATA AHCI Controllers.
Good luck!
Dieter (alias Fernando)

#936 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by JAXIMUS 07.11.2019 03:02

avatar

I really can't thank you enough! Everything worked! I had to put this all aside for months and now I've got my system going!

Tremendous thanks, I've sent my donation.

Cheers ;)

#937 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by xiaox 08.01.2020 19:44

I have a question, i have a intel ahci driver(version 11.2.0.1006) it can work on a xp, but when i try to integrating into a windows 2003 disc, nlite says it's a pnp driver, can i use this driver + your txtsetup.oem to make it to txtmode?
(this driver comes with iaAHCI.cat, iaAHCI.inf and iaStor.sys)


also i learned to install xp on 300-Series Chipsets but how to fix the usb problam?

#938 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 08.01.2020 20:24

avatar

@xiaox:
If you want to follow my guide, which is within the start post of this thread, you should use one of the textmode drivers, which are linked there.
Regarding the USB driver problem I recommend to look into >this< thread.
Regards
Dieter (alias Fernando)

#939 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 11.01.2020 05:02

The text mode driver needed here is an empty / corrupted archive - I hope it can be made to work again - I've made some progress but do need to install successfully with AHCI mode activated in the BIOS. Please fix the downloader - When I get a full successful install there will be a donation !

>Universal 32bit Intel RST textmode driver v11.2.0.1006 mod+signed by me (done at 01/03/2019)< (>MIRROR<)
Here is the link to an appropriate 64bit textmode drivers for all Intel AHCI and RAID Controllers from ESB2 and ICH7R/M up to the latest Intel 300-Series and X399 Chipsets):
>Universal 64bit Intel RST textmode driver v11.2.0.1006 mod+signed by me (done at 01/03/2019)<

#940 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 11.01.2020 06:54

avatar

@fraz:
Welcome to the Win-RAID Forum!
I doubt, that the offered driver archives are corrupted and suspect, that your used WinRAR tool is absolutely outdated (has to be v5.xx).
Regatds
Dieter (alias Fernando)

#941 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 11.01.2020 07:40

Hello Fernando,

You are correct - I had an old WINRAR - Not now - Your archive extracted well and I've compiled the installer - I saw a huge amount of controllers that presumably pertain to Z87, Z97, Z170, Z270, Z370 & Z390 & X79, X99 & X299 - I've included all of them and hopefully the installer can differentiate between what is needed and what is not - Is it OK to do this?

The disk is formatting ready for install - And the BIOS is set to AHCI !!! - This board is MSI Z97-G43 but there are others of most chipsets mentioned above - I also have a board like your in your sig!!!

Now I don't know what will happen afterwards - eg drivers that need installing or whether driver pack will work - I'll be back, maybe with a screenshot or two !

Due to the text mode driver the HDD can be seen on "Disk 0 at ID 0 on bus 0 in IaStor [MBR]" - I forgot to do a quick format so I'll have to wait but if it works it will be worth it ! - Till later

Is there a need to install any other chipset driver or Management Engine Interface?

#942 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 11.01.2020 08:34

avatar

Zitat von fraz im Beitrag #941
I saw a huge amount of controllers that presumably pertain to Z87, Z97, Z170, Z270, Z370 & Z390 & X79, X99 & X299 - I've included all of them and hopefully the installer can differentiate between what is needed and what is not - Is it OK to do this?
No, you should integrate only the support of the really matching Controller.
Zitat von fraz im Beitrag #941
Is there a need to install any other chipset driver or Management Engine Interface?
No!

#943 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 11.01.2020 08:56

@Fernando:
OK I take your point but getting ONLY the necessary controllers is not easy - I suppose the board could be booted in Windows 7 0r 10 to get the hardware ID's ? - But this is a big learning curve over a "normal supported build".

I'll bear this in mind for the next install so I'll see how this goes and report back if there are "other problems" from including all the controllers within the install

#944 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by Fernando 11.01.2020 09:30

avatar

@fraz:
Users, who want to follow my guide, should have read the chapter "Pre-conditions for s successful integration of the Intel AHCI/RAID drivers" before they start with their work and not thereafter.
To make it as easy as possible to find the matching Controller, I have added the DeviceID to the listed Controller names.

#945 RE: [Guide] Integration of Intels AHCI/RAID drivers into a Windows XP/W2k3/W2k CD by fraz 11.01.2020 09:59

Hi, it went badly and would not boot after install, so, I've booted Windows 10 and found out the hardware ID is 8C82 and this has been included in the next attempt along with the IA driver from the MSI CD - Back soon but I'm not that confident it will work.

What I have noticed is the speed of the install has increased by quite a lot so something must have been working (more quickly)__

Xobor Forum Software von Xobor
Datenschutz