Page 2 of 73
#16 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Fernando 27.10.2013 13:11

avatar

Update of my guide

Today (10/27/2013) I have updated some links within the start post of this thread.

Changelog:

  • customized: Universal 32/64bit Intel RST textmode drivers v11.2.0.1006 mod by Fernando (by renaming the 7-Series, 8-Series and 9-Series Intel SATA AHCI Controllers to avoid any user mistakes during the integration)
  • customized: Universal Intel RST Drivers & Software Set v11.2.0.1006 mod by Fernando (by renaming the 7-Series, 8-Series and 9-Series Intel SATA AHCI Controllers)

The reason for the customization was a report from a user named tirigliu at MSFN Forum (look >here<).
The SATA AHCI Controller names, which were given by Intel within the INF files of their newest v12 series RST(e) drivers, are absolutely irritating and even misleading, especially regarding the upcoming 9-Series Chipsets.

To avoid any future problems for users with an Intel 8-Series Chipset I just have changed the Controller names within the TXTSETUP.OEM and iaAHCI.inf INF files of my modded "Universal Intel RST driver v11.2.0.1006" packages.
Here is the old list with the HardwareIDs and the names of the Intel SATA AHCI Controllers for Intel Chipsets from 7-Series up (the names were given by Intel):

1
2
3
4
5
6
 
PCI\VEN_8086&DEV_1E02&CC_0106.DeviceDesc    = "Intel(R) 7 Series/C216 Chipset Family SATA AHCI Controller"
PCI\VEN_8086&DEV_1E03&CC_0106.DeviceDesc = "Intel(R) 7 Series Chipset Family SATA AHCI Controller"
PCI\VEN_8086&DEV_8C02&CC_0106.DeviceDesc = "Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller (added by Fernando)"
PCI\VEN_8086&DEV_8C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller (added by Fernando)"
PCI\VEN_8086&DEV_9C02&CC_0106.DeviceDesc = "Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller (added by Fernando)"
PCI\VEN_8086&DEV_9C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller (added by Fernando)"
 


And this is how the related part is looking now:

1
2
3
4
5
6
 
PCI\VEN_8086&DEV_1E02&CC_0106.DeviceDesc    = "Intel(R) 7 Series/C216 Chipset Family Desktop SATA AHCI Controller"
PCI\VEN_8086&DEV_1E03&CC_0106.DeviceDesc = "Intel(R) 7 Series Chipset Family Mobile SATA AHCI Controller"
PCI\VEN_8086&DEV_8C02&CC_0106.DeviceDesc = "Intel(R) 8 Series/C220 Chipset Family Desktop SATA AHCI Controller (added by Fernando)"
PCI\VEN_8086&DEV_8C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family Mobile SATA AHCI Controller (added by Fernando)"
PCI\VEN_8086&DEV_9C02&CC_0106.DeviceDesc = "Intel(R) 9 Series/C220 Chipset Family Desktop SATA AHCI Controller (added by Fernando)"
PCI\VEN_8086&DEV_9C03&CC_0106.DeviceDesc = "Intel(R) 9 Series Chipset Family Mobile SATA AHCI Controller (added by Fernando)"
 


I hope, that the choice of the correct Intel SATA AHCI Controller during the textmode integration procedure will be easier now.
The function of the driver itself will not be affected by the customization of the text files.

Regards
Fernando

#17 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by terrachild 28.10.2013 07:51

Well, I gave it a try win a 32bit XP disk.
I got something like this to work when I had an EVGA X58 set-up.
I recently upgraded to an ASUS X79 board and had to do it again.
I tried my X58 XP disk first just for the hell of it and got the BSOD very early.
So I followed your instructions and added your drivers with n-lite and also the Marvell and Asmedia drivers for the motherboard.
When I tried to install I got further than I did with the other X58 disk, so I thought it was going to work.
The install disk loaded the drivers, formatted my hd, copied the system files, and restated to continue the installation.
When the computer restarted, it booted off of the hard drive, the xp logo came up...yea...it's going to work....then BSOD!....sob!

It got pretty far, what do you think went wrong based on when it crashed?

Thanks

#18 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Fernando 28.10.2013 09:02

avatar

@ terrachild:
Welcome at Win-RAID Forum!

Since you didn't even write which Intel textmode driver and which special Intel SATA Controller you have integrated, it is not easy for me to find out the reason for your BSOD.
Here are some general advices:

  1. You have to start the nLite procedure from scratch with an untouched Windows XP CD content without loading a previously used Last_session.ini.
  2. Do not integrate more than the suitable Intel textmode driver (the Marvell and ASMedia drivers can be installed once XP is up).
  3. When you get the textmode driver popup, don't highlight more than just the suitable Intel SATA AHCI or RAID Controller.
  4. Before starting the XP installation, unplug all storage devices (HDD/SSD/USB drives/SD Cards) except the drive you want to get XP installed.

Regards
Fernando

#19 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Jack 09.11.2013 06:11

Dear Fernando:

I want to install a Windows XP (SP3) OS on my new computer system with the Gigabyte motherboard GA-H87-D3H. In order to make the XP installation package can recognize the SATA HDD connected in the computer, which version of AHCI driver should be selected to match with the H87 chipset best? Could you please advise?

Thank you very much. Fernando.

#20 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by lawn386 23.11.2013 14:55

Hi,
I just added your drivers in windows xp, made new image with it, setuo bios to ahci and run install. However, on certain stage I saw something like "There are no any HDD at your system". My config is asrock z87 extreme4, i7 4770k - do these drivers work with it?
Thx

#21 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Fernando 23.11.2013 18:19

avatar

@ lawn386:
Welcome at Win-RAID Forum!

Zitat von lawn386 im Beitrag #61
I just added your drivers in windows xp, made new image with it, setuo bios to ahci and run install.
What exactly have you done and what do you mean with "your drivers"?
You will find the guide about how to integrate the Intel AHCI driver into a Windows XP image and the download links to the suitable drivers within the start post of >this< thread.
Which driver (name and version) did you integrate and which one of the listed Intel SATA Controllers did you check during the textmode driver integration?

Zitat
However, on certain stage I saw something like "There are no any HDD at your system". My config is asrock z87 extreme4, i7 4770k - do these drivers work with it?

Not all drivers, which you can find within the start post, will work with Intel Z87 chipset mainboards in AHCI mode, but if you read the text I have added to each driver, you will find the suitable one. It is named "Universal 32bit Intel RST textmode driver v11.2.0.1006 mod by Fernando".

Regards
Fernando

#22 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by lawn386 23.11.2013 21:25

I used Universal 32bit Intel RST AHCI & RAID driver v11.2.0.1006 mod by Fernando. As described I integrated it into a Windows XP image with nLite. At the stage of choosing the Intel SATA Controllers from the list I choose all of them because I was not sure what exactly to choose. Is there a problem that I choose all of them? Then how can I find out what SATA Controller to choose?

#23 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Fernando 23.11.2013 21:55

avatar

Zitat von lawn386 im Beitrag #64
At the stage of choosing the Intel SATA Controllers from the list I choose all of them because I was not sure what exactly to choose. Is there a problem that I choose all of them?
Yes, usually Windows XP Setup will give a BSOD, if you integrate an Intel RST driver and check too many Intel SATA Controllers.

Zitat
Then how can I find out what SATA Controller to choose?

If you have already another OS running with the same system, you should check the DeviceID of the Intel SATA AHCI Controller (right click onto it > "Properties" > "Details" > "Property" > "HardwareIDs").
Since your system has an Intel 8-Series Chipset Desktop mainboard, only one of the following Controllers is the correct one:

  • "Intel(R) 8 Series/C220 Chipset Family Desktop SATA AHCI Controller DEV_8C02 (added by Fernando)" or
  • "Intel(R) 8 Series/C220 Chipset Family Desktop SATA AHCI Controller DEV_9C02 (added by Fernando)"

So if you don't know the exact DeviceID of your on-board Intel SATA AHCI Controller, check them both.

#24 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by lawn386 24.11.2013 13:13

Thank you for reply,
I tried to integrate drivers you mentioned:
Intel(R) 8 Series/C220 Chipset Family Desktop SATA AHCI Controller DEV_8C02 (added by Fernando)
Intel(R) 8 Series/C220 Chipset Family Desktop SATA AHCI Controller DEV_9C02 (added by Fernando)
But I got the following: "Stop : c000021 unknown hard error \systemroot \system 32 \ntdll.dll"
Then I integrated 2 drivers above PLUS the following drivers:
Intel(R) ICH8R/DH/DO SATA AHCI Controller (added by Fernando)
Intel(R) ICH8 SATA AHCI Controller (added by Fernando)
Intel(R) ICH8M-E/M SATA AHCI Controller (added by Fernando)
And with these 5 drivers Windows started installation under AHCI mode successfully. However, when it reboot several times during installation it said that pci.sys file missing. Then I boot from Live CD and saw that the folder windows/system32/drivers is empty – what is the possible reason for it and what should I do?

#25 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Fernando 24.11.2013 14:40

avatar

Zitat von lawn386 im Beitrag #24
I tried to integrate drivers you mentioned:
Intel(R) 8 Series/C220 Chipset Family Desktop SATA AHCI Controller DEV_8C02 (added by Fernando)
Intel(R) 8 Series/C220 Chipset Family Desktop SATA AHCI Controller DEV_9C02 (added by Fernando)
But I got the following: "Stop : c000021 unknown hard error \systemroot \system 32 \ntdll.dll"
Please give me more informations regarding your system (numbers, names and connection sort of all HDDs/SSDs).
Did you follow the advice within my guide to unplug all not absolutely needed drives (HDDs/SSDs/USB Flash/Optical Drives) before starting the XP installation?

Zitat
Then I integrated 2 drivers above PLUS the following drivers:
Intel(R) ICH8R/DH/DO SATA AHCI Controller (added by Fernando)
Intel(R) ICH8 SATA AHCI Controller (added by Fernando)
Intel(R) ICH8M-E/M SATA AHCI Controller (added by Fernando)
And with these 5 drivers Windows started installation under AHCI mode successfully.

None of the additionally added Intel SATA AHCI Controllers do support your ASRock Z87 Extreme4.

Zitat
Then I boot from Live CD and saw that the folder windows/system32/drivers is empty – what is the possible reason for it and what should I do?

Please check the HardwareIDs of your on-board Intel SATA AHCI Controller from within the Live CD or by running a bootable media containing a hardware detection tool.

#26 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Aersson 10.12.2013 03:49

Great guide there Fernando, thank you very much!

Thing is, I'm trying to do this and i can't seem to get it working.

What i find out about my chipset in Sisoftware Sandra is this: "82801GB/GR/GH (ICH7)"

Now I've tried the ICH7R/DH that was in one of the links in the main post but can't get it to work.

And I've been googling for a specific "ICH7/82801GB" driver for hours and can't seem to find it.

What do?

I won't be surprised if I'm doing something wrong or I've missunderstood this thing completely, I'm totally new in this.

#27 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Fernando 10.12.2013 09:37

avatar

@ Aersson:
Welcome at Win-RAID Forum!

Without any additional informations regarding
a) your mainboard/PC (name and manufacturer),
b) the sort of your system drive (single HDD/SSD or RAIDed HDDs/SSDs) and
c) the SATA mode (AHCI/RAID) you are running your system drive
I am not able to help you.
The best way to find out the suitable AHCI/RAID driver is to check the DeviceID of the in use SATA Controller. So if you are currently running any Windows Operating System, please run the Device Manager, search for the listed Intel SATA Controller and post the HardwareIDs of it. You can get them by doing a right click onto the Controller and choosing the following options: "Properties" > "Details" > "Property" > "HardwareIDs".

Regards
Fernando

#28 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Aersson 10.12.2013 23:43

Well It's a Dell PC, Mainboard Model is '0RD203'

I'm running a non-raid single HDD, just going to install XP on a different partition.

I don't really know what ACHI is and I can't find anything about it in BIOS (There are no options except raid-operation/standard operation)

These are the Hardware ID's i get from windows 7:

IDE\DiskWDC_WD6400AAKS-00A7B2___________________01.03B01
IDE\WDC_WD6400AAKS-00A7B2___________________01.03B01
IDE\DiskWDC_WD6400AAKS-00A7B2___________________
WDC_WD6400AAKS-00A7B2___________________01.03B01
GenDisk

Also my drive is listed as an ATA device even though It's SATA in W7

#29 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Fernando 10.12.2013 23:57

avatar

Zitat von Aersson im Beitrag #28
I'm running a non-raid single HDD, just going to install XP on a different partition.
I don't really know what ACHI is and I can't find anything about it in BIOS (There are no options except raid-operation and standard operation)
If you are running a non-RAID single HDD and don't see any BIOS option to set the Intel SATA Controller to "AHCI" mode, you probably will be able to get Windows XP installed without the need to integrate any driver.

Zitat
These are the Hardware ID's i get from windows 7:
IDE\DiskWDC_WD6400AAKS-00A7B2___________________01.03B01
IDE\WDC_WD6400AAKS-00A7B2___________________01.03B01
IDE\DiskWDC_WD6400AAKS-00A7B2___________________
WDC_WD6400AAKS-00A7B2___________________01.03B01
GenDisk

These are not the HardwareIDs of the Intel SATA Controller. You can find it within the Device Manager section named "IDE ATA/ATAPI Controllers".

#30 RE: Integration of Intels AHCI/RAID drivers into a Windows XP CD by Aersson 11.12.2013 00:08

Lol Yeah Figured there was something wrong with that.

I do get the bluescreen error that is associated with not having the drivers though, spent some time googling it.

PCI\VEN_8086&DEV_27C0&SUBSYS_01D21028&REV_01
PCI\VEN_8086&DEV_27C0&SUBSYS_01D21028
PCI\VEN_8086&DEV_27C0&CC_01018F
PCI\VEN_8086&DEV_27C0&CC_0101

Is this it?

Xobor Forum Software von Xobor
Datenschutz