Hey hoe!

Well, I just have another silly idea ;o)))
See, my chinese board HUANAN RUNING X79-VB10 show either the RUNING logo once the PC starts or

a classic black/white POST screen with American Megatrends logo and... (to be continued)

So, first modding the original logo into the black/green Matrix picture that I created my self, was quite easy, with the ChangeLogo_5.0.0.2 tool. BUT!

Once I turn off the boot logo in the bios menu, the classic black/white POST shows only the American Megatrends logo with some date and version of the bios and "Press ESC or DEL to enter the Setup" and thats it! No CPU information, no RAM information, no drive information... nothing! All you see is the two-digit POST codes blinking in the lower right corner of the screen and then it goes to Windows logo and boots... (I will add the actual real picture of my POST screen later as I write this at work.)

So my question is, is there a way to add/edit or just unhide the entries that are normally part of the POST screen? Like on the picture bellow? I am just curious and discovering...

I remember I did such similar thing couple years ago... But that was on old nVidia Kepler-based graphics card ;o))) There was a tool to edit the VBIOS regarding voltages and timings and part of the tool was also a GUI to enable/edit the graphics card POST text and to show some technical information about the graphics itself. So I believe there has to be some tool for the classic bios POST entries. Unfortunately I am not that skilled in binary coding to edit the bios myself i.e. in HxD.

Any idea or advise would be appreciated!

Cheers, good luck