Gigabyte and RST Driver nightmare

Win-Raid Forum (Drivers - Firmware - Modding) � Important Drivers (AHCI/RAID, NVMe, USB etc.) � General: Storage Drivers (AHCI/RAID, NVMe and USB) � Gigabyte and RST Driver nightmare

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1 | Gigabyte and RST Driver nightmare datum

Yesterday 11:53 pm

Hi

I am looking for help with the Gigabyte Z590 Gaming X motherboard. Namely, the problem is that after installing the RST driver (from Gigabyte, Intel, station-drivers) during the Windows reboot, the HDD disks turn off to restart in a moment.
Everything works fine on the default driver from the Windows installation. I wrote to Intel and Gigabyte, Intel stated that there is no fault on their configuration, Gigabyte is still preparing an answer.

When I restart from the reboot button, the effect does not occur, only reboot from the OS

Maybe one of you will help in solving this problem.

Thanks
Venom

My config:
Gigabyte Z590 Gaming X
2x8GB 3200 MHz Crucial Balistix
SSD Samsung 980 (OS)
SSD 850 Pro
HDD WD Red 6TB
HDD WD Green 2TB
Corsair RM650
Asus RTX 2060 Evo
Windows 10 21H2

reply

#2 | RE: Gigabyte and RST Driver nightmare datum

Today 12:10 am

@VenomKris: Welcome to the Win-RAID Forum!
Which Intel RST driver version did you install and why did you choose an Intel driver for Samsung's NVMe Controller (and not the Samsung NVMe driver v3.3.0.2003)?
Which are the HardwareIDs of the NVMe Controller (listed within the "Storage Controllers" section) and of the Intel SATA AHCI/RAID Controller (listed either within the "IDE ATA/ATAPI Controllers" or "Storage Controllers" section)?
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 5600X, System Drive: 1 TB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win11 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send me a donation by clicking onto >this< or >this< link.

reply

#3 | RE: Gigabyte and RST Driver nightmare datum

Today 12:19 am

Hi Fernando

I will send tomorrow IDs.
Ive instaled rst for sata controller from mainboad manufacturer (INF and other drivers) and after that i have problem during reboot (two mine HDD stop and star again)

i will chceck NVMe driver tomorrow.

reply

#4 | RE: Gigabyte and RST Driver nightmare datum

Today 9:00 am

Hi Fernando

1. Unfortunately driver from Samsung website is not for my drives (Samsung 980 and 850 PRO)
2. IDs of my controlers

SATA:
PCI\VEN_8086&DEV_43D2&SUBSYS_B0051458&REV_11
PCI\VEN_8086&DEV_43D2&SUBSYS_B0051458
PCI\VEN_8086&DEV_43D2&CC_010601
PCI\VEN_8086&DEV_43D2&CC_0106

NVMe:
PCI\VEN_144D&DEV_A809&SUBSYS_A801144D&REV_00
PCI\VEN_144D&DEV_A809&SUBSYS_A801144D
PCI\VEN_144D&DEV_A809&CC_010802
PCI\VEN_144D&DEV_A809&CC_0108

reply

#5 | RE: Gigabyte and RST Driver nightmare datum

Today 12:19 pm

@VenomKris: Thanks for the additional information.

Zitat von VenomKris im Beitrag #4
Unfortunately driver from Samsung website is not for my drives (Samsung 980 and 850 PRO)

Here is my comment:

Although the Samsung NVMe Controller with the DeviceID DEV_A809 is not listed within the related *.INF file (Reason: The SSD is newer than the driver), Samsung's 980 Series SSDs resp. their NVMe Controllers are fully supported by the Samsung NVMe driver v3.3.0.2003 WHQL. The only tiny disadvantage is, that the installation has to be forced by using the "Have Disk" button.
Proof: The Samsung 980 Pro of my AMD X570 Chipset system is running fine with the Samsung driver v3.3.0.2003 WHQL. Here are the related screenshots:

Advice: Don't forget to set a "Restore Point" before you are going to change any storage driver!
The Samsung 850 Pro SSD is a SATA one and its Controller cannot use any NVMe driver.

reply

#6 | RE: Gigabyte and RST Driver nightmare datum

Today 1:22 pm

Hi.

You said force by using button Have disk. How to do that. After runnig setup I have info no device connected and ony ok button.

And what about my issue with hdd drives when they stop and start during restart OS?

Thx

reply

#7 | RE: Gigabyte and RST Driver nightmare datum

Today 3:05 pm

@VenomKris:

Zitat von VenomKris im Beitrag #6
After runnig setup I have info no device connected and ony ok button.

When you are going to update or replace an Intel storage driver, you should do it from within the Device Manager.
Which "Setup" did you run? Is the OS already installed? If yes, onto which SSD?

Zitat von VenomKris im Beitrag #6
And what about my issue with hdd drives when they stop and start during restart OS?

You should try another driver version.
Which HDD drives are affected and which Intel AHCI driver version is your on-board Intel SATA Controller currently using (I asked it already before, but didn't get an answer)?

reply

#8 | RE: Gigabyte and RST Driver nightmare datum

21 minutes ago

Zitat
When you are going to update or replace an Intel storage driver, you should do it from within the Device Manager.
Which "Setup" did you run? Is the OS already installed? If yes, onto which SSD?

I used Samsung_NVM_Express_Driver_3.3.exe and don't have any version which I can install manualy

Zitat von Fernando im Beitrag #7
You should try another driver version.
Which HDD drives are affected and which Intel AHCI driver version is your on-board Intel SATA Controller currently using (I asked it already before, but didn\'t get an answer)?

Only HDD drives (I tested 5 different disk - WD, seagate, Hitachi with different configuration, different sata ports) .
I tried many version and always issue occours exept default Windows driver (on screenshot you have version):

I can say that any driver from Intel causes problems

Venom

reply

#9 | RE: Gigabyte and RST Driver nightmare datum

4 minutes ago

@VenomKris: Since you obviously have a general problem with Intel and non-Intel storage drivers, I have moves this thread into the "Storage Drivers" Sub-Forum.

Zitat von VenomKris im Beitrag #8
I used Samsung_NVM_Express_Driver_3.3.exe and don't have any version which I can install manualy[/url]You can find the download link to the latest "pure" Samsung NVMe drivers within the second post of this thread. Please read carefully the related notes.[quote=VenomKris|p154890]I can say that any driver from Intel causes problems

And what about the generic MS in-box AHCI driver, which you are currently using (according to the attached screenshot)?

reply

USB 3.0/3.1 Drivers (original and modded) �

Please enter a reason for warning.