Mobo froze and shutdown itself during the bios update around %30, now bios is bricked. I think the USB stick died in the worst possible time. Bios chip is Winbond 25Q256JWEQ. I would appreciate any suggestions to get this thing working again. I would rather not desolder it since it has other components next to it that might get damaged.

I was planning to buy this
amazon.com/KeeYees-SOIC8-EEPROM-CH341A-Programmer/dp/B07SHSL9X9/ref=sr_1_18?keywords=ch341a+25cxxx&qid=1637252650&sr=8-18
and an 1.8v adapter, but seems like the 25Q256 is not supported. I have a SPI TPM header right next to the bios chip, but I assume that is not usable for my purposes? Any suggestions on what to get on preferably amazon-US?

I have read this page
win-raid.com/t4287f16-GUIDE-The-Beginners-Guide-to-Using-a-CH-A-SPI-Programmer-Flasher-With-Pictures-10.html
, but mine doesn't have the JSPI1 header.

Can't post links properly due to account age.

TPM header is for TPM, not useful here. SPI chip is a little borader, men might work with clip. Buy as written, dump the firmware and post a link to it. Looks like neoprgrammer possibly does know the chip? (https://www.overclock.net/threads/agesa-...1733304/page-34)

Thank you for the link.
This is the SPI TPM? header I mentioned.


His motherboard has a similar header but I am not sure I can use mine like he did, is that possible?

And I am sorry, I don't understand what you mean by "buy as written".
Does that mean something like this will work?
amazon.com/Organizer-EEPROM-CH341A-Adapter-Programmer/dp/B07V2M5MVH/ref=sr_1_3?keywords=ch341a+1.8v&qid=1637262080&sr=8-3

Zitat von lfb6 im Beitrag #2

---

TPM header is for TPM, not useful here. ....

---

This is a WSON8 surface soldered, the regular clip (SOIC8) on the SPI programmer will not work (The CH341 still does its job), some new needle pin pressure contacts clips r around the web, other than that de-soldering only.
Or search info on the 14pin Asus header.