[Guide] Force ports to be "internals" in RST v12 (native Windows 8.1) or storahci (TreatAsInternalPort)

Win-Raid Forum (Drivers - Firmware - Modding) � Important Drivers (AHCI/RAID, NVMe, USB etc.) � Specific: Intel AHCI/RAID Drivers � [Guide] Force ports to be "internals" in RST v12 (native Windows 8.1) or storahci (TreatAsInternalPort)

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1 | [Guide] Force ports to be "internals" in RST v12 (native Windows 8.1) or storahci (TreatAsInternalPort) datum

Sat May 30, 2015 12:48 pm (Last edited: Sat Jun 27, 2015 12:16 pm)

Padrys

Show info

Posts:	1
Registered since:	05.30.2015

Hi, i just found something that might be useful:
Windows 8.1, with native Intel Raid driver 12.0.1.1019 dated 08/09/2013, adding Device key under Parameters, then Controller0Phy0SafelyRemove, Windows will no longer display eject!
Houra (im french:p)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
 
Windows Registry Editor Version 5.00
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorAV]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorAV\Parameters]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorAV\Parameters\Device]
"Controller0Phy0SafelyRemove"=dword:00000000
"Controller0Phy1SafelyRemove"=dword:00000000
"Controller0Phy2SafelyRemove"=dword:00000000
"Controller0Phy3SafelyRemove"=dword:00000000
"Controller0Phy4SafelyRemove"=dword:00000000
"Controller0Phy5SafelyRemove"=dword:00000000
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorAV\Enum]
"0"="PCI\\VEN_8086&DEV_2822&SUBSYS_82D41043&REV_00\\3&11583659&0&FA"
 

Edit:
found a way to do this with storahci

Add REG_MULTI_SZ TreatAsInternalPort in Device within each line is a channel, this will look like this:

1
 
TreatAsInternalPort          REG_MULTI_SZ          0 1 2 3 4 5

1
2
3
4
5
 
Windows Registry Editor Version 5.00
 
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\storahci\Parameters\Device]
"TreatAsInternalPort"=hex(7):30,00,00,00,31,00,00,00,32,00,00,00,33,00,00,00,\
  34,00,00,00,35,00,00,00,00,00
 

reply

#2 | RE: How to force ports to be "internals" in RST v12 (that cames with Windows 8.1) datum

Sat May 30, 2015 1:12 pm

@ Padrys:

Welcome at Win-RAID Forum and thanks for your contribution.

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#3 | RE: [Guide] Force ports to be "internals" in RST v12 (native Windows 8.1) or storahci (TreatAsInternalPort) datum

Tue Jun 09, 2015 10:00 am (Last edited: Tue Jun 09, 2015 10:00 am)

Vote for sticky :)

Unsecure link removed by Fernando

reply

#4 | RE: [Guide] Force ports to be "internals" in RST v12 (native Windows 8.1) or storahci (TreatAsInternalPort) datum

Sun May 22, 2016 1:10 am

Any idea how to do this with RST v14 on AHCI (Win7 64Bit) with Fernandos drivers?

I only have these entries on my system (no iaStorAV nor storahci):
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorA
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorF
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV

I tried this without success:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorA\Parameters\Device]
"EnableQueryAccessAlignment"=dword:00000001
"Controller0Phy0HIPM"=dword:00000000
"Controller0Phy0DIPM"=dword:00000000
"Controller0Phy0SafelyRemove"=dword:00000000 <------ i added this entry

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorA\Enum]
"0"="PCI\\VEN_8086&DEV_1C02&SUBSYS_1C021849&REV_05\\3&11583659&0&FA"
"Count"=dword:00000001
"NextInstance"=dword:00000001

Any ideas?

reply

#5 | RE: [Guide] Force ports to be "internals" in RST v12 (native Windows 8.1) or storahci (TreatAsInternalPort) datum

Mon Jul 11, 2016 10:27 am

@Maniaxx:
Welcome at Win-RAID Forum! I am sorry about my delayed reply.

Zitat von Maniaxx im Beitrag #4
Any idea how to do this with RST v14 on AHCI (Win7 64Bit) with Fernandos drivers?

Unfortunately I don't know it myself.
Regards
Dieter (alias Fernando)

reply

#6 | RE: [Guide] Force ports to be "internals" in RST v12 (native Windows 8.1) or storahci (TreatAsInternalPort) datum

Mon Jul 11, 2016 6:12 pm (Last edited: Tue Jul 12, 2016 8:55 am)

I found the answer some years ago for an older version of Intel RST (I think it was v13)...
I'll find it again.

In the meantime, try this (Post #3).

Unsecure link removed by Fernando

reply

intel dx79to enable raid can�t install win7 � � QM77 HP EliteBook 8570w

Please enter a reason for warning.