The laptop is using 416. So after transferring the setting and using UBU it does not show an updated version for the VBIOS. It gives the option to update to 2171. (which it is at already)
When I did this with my desktop Gigabyte board it showed a new version in UBU. Am I doing something wrong?

When I do update the VBIOS to 217, it actually changes the first VBIOS from 2179 to 2171.

@ tabascojoe
UBU does not support upgrading Device ID of mobile devices, so a replacement to be done manually.

ah!, no wonder I saw it on the desktop board.
So does that mean UBU updates the VBIOS just not the number? How do you replace it manually?

Zitat von SoniX im Beitrag #120

---

@ tabascojoe
GPU-Z, AIDA64, Properties of video in a snap "Device Manager" operating system.

---

Zitat von tabascojoe im Beitrag #123

---

ah!, no wonder I saw it on the desktop board.
So does that mean UBU updates the VBIOS just not the number? How do you replace it manually?

---

Your significant nuclear is Broadwell HD graphics, the theory is different from a new skylake HD graphics, as the 8th generation integrated display the difference between core and the 9th generation and no desktop and mobile platforms points from Haswell HD graphics, the distinction between the concept of boundaries become comparatively very fuzzy.

Does somwhere exist a changelog file for Eagle lake vBIOS?
I have at the moment the version 1940 on my Q45 chipset. In your collection the version 2085 exist.
Would it be possible that 1xxx and 2xxx are different branches of the firmware, or is 2085 the latest for me too an better than 1940?

ch belongs to the old succession shows core, 4 series chipset with integrated display core, and GMA HD collectively for the fifth generation of the integrated graphics core. In earlier desktop and mobile platforms have two distinct branches, the final version as were 2085 and 2107, VBIOS no good or bad, but it won't bring a qualitative change, it can and driver version do compatible, especially some driver version clearly marked support updates to display the firmware, then a new version of the VBIOS will lead to better, especially improve the previously more common rendering errors

Dear SoniX, can you help me? Since i updated my vbios all works fine but it says BIOS unknown in gpu-z. I have an asus maximus hero viii, i7 6700k. I tried flashing the latest BIOS versión untouched. After flashing it, i can read in the BIOS options: vbios 1033, but after the first restart, it disappears and in gpu-z says BIOS versión unknown. Whats the problem?

@ jlmcr87
GPU-Z reads the VBIOS version is not where it is necessary.

Show VBIOS file that you assembled.

Thank Pacman. :)
The file is cleaned and ready for settings..

Updated Collection Intel OROM in "VBIOS_and_BSF.7z":
- added OROM VBIOS+BSF Haswell/Broadwell v1042

Updated Collection Intel OROM in "VBIOS_and_BSF.7z":
- added OROM VBIOS+BSF Skylake/Kabyake v1045
(Thanx to plutomaniac. :) )

Updated Collection Intel OROM in "VBIOS_and_BSF.7z":
- added OROM VBIOS+BSF Skylake/Kabyake v1046
(Thanx to plutomaniac. :) )

Zitat von SoniX im Beitrag #96

---

For GOP Driver SKL/KBL? Yes.
Attached VBT.BIN + VBT.BSF v2.03 for GOP Driver SKL/KBL v9.0.1039 and above.

---