That's great news :)
I'm currently abroad for work. I will test on Sunday

@SoniX

I tried transferring settings to vbt228 but got the following message:



When checking these out there are a lot of power conservation settings missing in vbt228. As for the eDP Link Training, the value is now expressed in Khz, while in older vbt this is expressed in Gbps.

@snixel

Yes, the settings you specified in 228 are marked as "Skip".
They are usually ignored or immediately deleted from the (SSF) settings file.
It’s bad when the old parameters are larger than what is provided in the new files.
Example, fby old parameter - 2 byte, and new parameter - 1 byte.

There were bytes became kilohertz ... That I can not say anything except as "The manufacturer reserves the right to make changes" ..

I think we should look for the settings in 221. This image flip, as I understand it, is observed only on notebooks. On desktops there are no such problems, it is checked.

@SoniX Yeah, apart from the image flip all seems normal with vbt221 and gop1092
I'll see if I can find some setting to correct the image.

@SoniX

From what I understand the 180 Degree rotation setting only enables the functionality to rotate;

$180_Deg_Rotation_Enable, "Enable 180 Degree Rotation:", &No_Yes_List,
"This feature when set to yes, will enable 180 Degree rotation "
"otherwise, the rotation functionality will be disabled."

It looks like after enabling this functionality we should still actually rotate it in the GOP driver?

$180_Deg_Rotation_Enable 1 bit ; 180 degree rotation enable for LFP in GOP driver.

Can we do this?

This setting is clearly different from the VGA driver rotation:

$Rot_Enable, " Enable Rotation:", &No_Yes_List,
"This feature when set to yes, will allow for rotation. "
"Otherwise, when the feature is set to no, "
"the rotation functionality will be disabled within the driver."

@snixel

Thinking what needs to be done easier.
Since this problem is only on the notebooks, need to find such a notebook in the BIOS of which there is a GOP 109x and see the settings.

Updated the collection of GOP VBT and OROM VBIOS.

Added by OROM VBIOS CFL 1019 and CFL/CML 1023.
These files are not cleared from the settings. But you can use them to transfer your settings using CloneVBT.
For 1019 all 1000-1018
For 1023 all 1020-1022

where can I find the 1000-1018 vBIOS for CFL as mentioned in the word file included in the All Collections compressed file?

@lanzaozijun

Unfortunately, the VBIOS and BSF source files for CFL are not available.

Hello. I have OROM VBIOS 2179. Can I update this to Haswell/Broadwell 1044? Or OROM VBIOS 2180 is latest for me? Haswell i7 4700MQ, mobile chipset HM86.

Zitat von AtomZ im Beitrag #326

---

Hello. I have OROM VBIOS 2179. Can I update this to Haswell/Broadwell 1044?

---

Zitat

---

Or OROM VBIOS 2180 is latest for me? Haswell i7 4700MQ, mobile chipset HM86.

---

There is no particular difference between 2179 and 2180

Tested SKL VBT 211 + GOP 1092 , everything works well.
ECS Z170 BLADE + I9 9900 ES QQBZ

Thanks @Pacman.

Added to collection.
Use CloneVBT to upgrade. Only for previous versions 1020-1024.