Zitat von zt3 im Beitrag #30

---

Flashed without any problem.

---

Updated collection of OROM VBIOS and BSF-script files.
Updated "Table VBT OROM VBIOS Version and Size.docx "

What to do, if there is a red entry - Integrated HDMI/DisplayPort...../Device 1?



I didn't figure it out what it means, but it's working.
Motherboard is MSI C847MS-E33 with integrated Celeron 847 (sandybridge).
Copy from hwinfo 5.02

Intel Sandy Bridge-MB GT1 - Integrated Graphics Controller [D2/J1/Q0] [Micro-Star International]
2170 PC 14.34 08/07/2013 08:01:27

Original vbios was 2137.

Zitat von Jest im Beitrag #33

---

What to do, if there is a red entry - Integrated HDMI/DisplayPort...../Device 1?

---

Zitat von SoniX im Beitrag #34

---

Zitat von Jest im Beitrag #33

---

What to do, if there is a red entry - Integrated HDMI/DisplayPort...../Device 1?

---

Send source and destination files.

---

@Jest
You had to use the script snm_2170.bsf, since the size of VBT 2165 == 2170.

I updated bios and it works, but in HWinfo under video adapter "video BIOS version" is Unknown.

Zitat von Jest im Beitrag #37

---

I updated bios and it works, but in HWinfo under video adapter "video BIOS version" is Unknown.

---

Ok, this explains everything.

Thank you very much.

Hi,

My desktop mother broad is MSI Z77A-G45 (MS-7752) Rev 1.1. An Intel SandyBridge i3-2100 is installed on it. I have the following questions:

1) Your guide says "For Desktop DevID SNB-102, IVB-162, HSW/BDW-402,412,c02,c12". Should I select "8086,162" for my SandyBridge as it should be for IvyBridge?


2) In my case, version VBT - " A6 00" -> A6 (v1.66); size VBT - "0E 0F" -> 0F0E (3854 byte) ; 2137 version OROM

Am I right to select "snd_2137.bsf"?


3) Why the "VBT Information" in Intel Binary Modification Programm (IBMP) shows "VBT version: 165", not 166 (A6 -> v1.66)? Is it normal or abnormal?


4) Should I set "Chipset Selection>VBIOS Configuration for Chipset" to "Sandybridge Desktop" for my Sandybridge CPU?

one string of the output file is different according to this setting: IVB -> $Chipset 13; SNB -> $Chipset 11


Thanks for your kindly attention :)

Zitat von javahk168 im Beitrag #40

---

1) Your guide says "For Desktop DevID SNB-102, IVB-162, HSW/BDW-402,412,c02,c12". Should I select "8086,162" for my SandyBridge as it should be for IvyBridge?

---

Zitat

---

2) In my case, version VBT - " A6 00" -> A6 (v1.66); size VBT - "0E 0F" -> 0F0E (3854 byte) ; 2137 version OROM
Am I right to select "snd_2137.bsf"?

---

I do not know why Intel suggests using the script version 1.65. All the files are original, provided by Intel.
Yes, versions OROM VBIOS, and the script must be the same.

Zitat

---

3) Why the "VBT Information" in Intel Binary Modification Programm (IBMP) shows "VBT version: 165", not 166 (A6 -> v1.66)? Is it normal or abnormal?

---

This is normal. The program displays a message version of the script, not the OROM.

Zitat

---

4) Should I set "Chipset Selection>VBIOS Configuration for Chipset" to "Sandybridge Desktop" for my Sandybridge CPU?
one string of the output file is different according to this setting: IVB -> $Chipset 13; SNB -> $Chipset 11

---

No. Leave as is.

Thank you very much. I have successfully modified the VBIOS with your help.

Anyone able to reupload the Intel BMP?, the link is down :(

Thanks!

Collection OROM and BSF-scripts.
Strange problems with storage on SendSpace and RGHost. One server is lost, and on the other does not upload. So I upload here.