@ elisw
Transfer settings, check the work on all video portals.

@SoniX

in your initial post you wrote: "Important! The size of the resulting file SSF settings should not exceed 30 KB. The average size of 15-20 kb."

is this sentence STILL important?

Why do i ask? Cause, whenever i export my SSF settings, the resulting file is ALLWAYS around 40kb in size. Is there something i am doing wrong, or will that filesize be ok, too?
And my GpuZ displays like this screenshot for the modified iGPU VBios:

https://www.hackintosh-forum.de/index.ph...-iGPU-GpuZ-JPG/

watch the many "N/A" and "Unknown" entries.

@MDoehler
A larger size is possible for new VBIOS (SkyLake - CoffeeLake).
For VBIOS of previous generations (Sandy/IvyBridge - Hasswell), the configuration file usually does not exceed 30KB. Since there are no special settings on desktop PCs, but it may well be + / - for mobile devices.

Hello,

i have a question relating to select the right vbios, because mine (Bearlake-B) is older than the described in the "Table VBT OROM"-document. Or is it done in the same way?
So, must it match with vbt-version and vbt-size? Is it also necessary to transfer the setting from old to new vbios?

Thanks!

VBIOS files has modded with Intel BMP and old settings has been imported. I have succefully replaced with MMTool to my ux32vd bios:

IntelIvbGopDriver to 3.0.1030
IntelSnbGopDriver to 2.0.1024
OROM VBIOS from 2137 to 2171

IntelSaGopDriver - untouched ( read from this forum that his has to be untouched )

Everything is working just fine. But I have little doubt because GPU-Z has VBIOS: "unknown" and in computer bios is showing wrong version of Gop Drivers and VBIOS version row has disappeared.

UBU is showing upgrades when reading bios.bin right and updated.

Do anyone have vbt.brf for SNB/IVB? Detailed version of VBT is 165.

For Haswell vbt.brf ( for seperated vbt file ) has been uploaded here, but I can't find it for SNB/IVB.

I figured out that IntelGopVbt raw file in bios file is the same kind of file that you get out of from Intel BMP.

File > Create an MBI module..., then just a delete header with hex editor and replace the body.

Still I do not have any idea how to update Gop EFI drivers.

Updated Collection Intel OROM in "VBIOS_and_BSF.7z":
- added OROM VBIOS+BSF
-- Skylake/Kabylake/Coffeelake v1055
-- Geminilake v1004 (Atom/Gemini)
-- Haswell/Broadwell v1044

(More Thanx to Pacman. :) )

it's for coffelake?

@Pacman

Thank you. It remains to find BSF for these OROM. ;))

Hi,
Can someone please update mine for newer AHCI orom? I tried mmtool 5.0.24 and it doesn't want to open my .rom/.cab file, it says its not aptio V image.


Intel RST(e) RAID ROM v14.8.2.2397 = alternative option for Intel 8- and 9-Series Chipset RAID systems, good choice for Intel 100-Series Chipset RAID Systems (matching RAID drivers: Intel RST(e) v14.8.x.xxxx)
https://mega.nz/#!oAEwAaLD!h4OhOt1lK6bRA...WYMHk2h02ghJGZ8




Here is my new .rom file, I used UEFI tool to inject nvme driver and it saved ar .rom later instead of .cap.

[[File:Z87Deluxe nvMe mod 2103.zip]]

hello i have try vbios 1055 in asus q170t original vbios is 1046 , after update , my lvds screen is not reconized correctly i have 17picture , in hdmi the picture is correct.
thanks for your help