I have strange situation because Intel 8 series /c220 series SMBus controller -8C22 shows me in device status: device status no drivers installed for this device.

any advice ?

My chipset 10.1.1.38 - Windows 10 Pro 64 bit.

Many thanks Fernando :)

Can I safely assume that certain System devices in Device Manager are working perfectly fine even when 'No drivers are installed for this device' is stated in the Device Status?
For example, my P9X79 board has a Intel(R) C600/X79 series chipset SMBus Host Controller - 1D22 and in the properties under Device status it says 'No drivers are installed for this device'.

Mobile 6th/7th Generation Intel(R) Processor Family I/O PMC - 9D21
Mobile 6th/7th Generation Intel(R) Processor Family I/O SMBUS - 9D23
Mobile 6th/7th Generation Intel(R) Processor Family I/O Thermal subsystem - 9D31

I have a strange problem: while the first 2 drivers are correctly updated using the 10.1.1.38 driver, the 3rd one isn't. Why it doesn't recognize the .inf file?

Zitat von Fernando im Beitrag #235

---

Simple reason: The INF file v10.1.1.38 for your last device is dated 01/01/1970!

---

Zitat von Fernando im Beitrag #237

---

Zitat von Bersekz im Beitrag #236

---

Anyway, I manually uninstalled all the Intel devices and launched the latest chipset device installer, so I managed to install all the drivers at last. The "problem" is that each device has now an annoying log of past events. Is it possible to remove them in some way?

---

Not really, but you can avoid wasting time with the installing/uninstalling/updating INF files of your on-board Intel Chipset Devices in the future: Avoid the installation of any "Intel Chipset Device Software" installer and do a maual installation of an INF file only for a certain Intel Chipset Device, if there is a yellow flag witin the Device Manager.
My general advice: Read the start post of this thread.

Zitat

---

Also, another problem I have is that some devices properties are as follow: "No driver installed for this device" under General tab and "This device isn't using any resources because it has a problem" under Resources tab, but I can't understand why.

---

You will understand it after having read the start post of this thread. The Intel Chipset Devices don't need a real driver (= *.SYS file) and the related Software doesn't contain any real driver.

---

I had already read the first post, and this was actually the first time I tryed the software installation instead of the manual one, just to find out what extra devices it was going to install (actually 3 extra ones besides the drivers flagged with yellow warnings). Also, being the first pc where I have W10 installed, it was also the first time for me to see that "Events" tab which I really can't stand. You have a log of what you have done to that device, and nothing else, no way to purge it even if you do a system restore.

hello, i have Intel P45 chipset, what is the latest inf version i can use? i use windows 10 x64

i have been using 9.4.4.1006 dated August 01 2013 that supports up to windows 8.1

but i see here that you have 9.4.2.1020 dated August 27 2014 that supports up to windows 8

what is really the latest for me?