Zitat von MeatWar im Beitrag #15

---

Perform the command [blau]FWUpdLcl64.exe -save default.bin/blau]

---

What...it cannot be, dont tell me that the device is not present anymore in device manager???
Go check it if u plz

I think I understand what the problem is
https://gyazo.com/5f63fcc3f6d9ca00167717fe31a54dd5

I made a restart but nothing changed

Its unloaded/not present anymore.

Lets get some things straight my friend...the past operations had success because the device was present and the device driver was installed and loaded.
Dont need to report all the errors that is present to u, as u already noticed, u just need to insure that that the device is present before execute all the explained commands as i gave u in the past posts.
So...if the system upon reboots/shutdowns does not has the device/driver loaded it will fails all the commands by Intel tools MEINFO/FPT then u have a HW issue, an SPI bios chip issue or a possible corrupted ME region on the bios.

Last resource action for u, treating this as a corrupted ME image, is the [Guide] Clean Dumped Intel Engine (CS)ME/(CS)TXE Regions with Data Initialization but i do not believe this will fix it.
But also it wont do worst if performed and if u think u got nothing to loose.
Also as suggested before, u still can try the re-flash (Instant Flash not Windows EXE) and then proceed to the last FW update already pointed but if the ME is corrupted its no good at all.

U may need to get in touch with Plutomaniac as he masters this area of Intel Engine (CS)ME/(CS)TXE, he may have a better view as i do not not have his experience in this area.
Sorry i couldn't help u more, good luck.

Thanks for the help. The driver will probably install normally, but the manager will display it as an unconnected device, even if the driver is reinstalled. and you are right in mentioning that the possible corrupted ME region on the bios. since the installation of the BIOS, in my opinion, was not successful.

I planned to use the board as a temporary solution for the next year and I need it for work, but can I constantly reset the cmos every time I turn it on, what is the risk of using such a BIOS and errors?? to be honest, any interference can lead to unpredictable actions on this board. but I would like to try something else that can be reversed in case of failure.

Asrock site provides only windows version of 3.10 BIOS I can.t run it through a Instant Flash ( usb flash drive), as far as I understand, I need another version of this BIOS, but how can I convert it or remove the necessary files from the win version?

In any case, thanks for your help and your time, we have definitely made some headway in our understanding.

Ill give u the extracted bios image from the oficial 3.10 EXE

@Rav106

Hero u go, the 1.30 first release for this motherboard, versions for DOS, WIN, Instant flash.

https://www25.zippyshare.com/v/Vmno2KLh/file.html

Zitat von MeatWar im Beitrag #22

---

Hero u go, the 1.30 first release for this motherboard, versions for DOS, WIN, Instant flash.

---