@thinking - Ohh yes, you can do that Rest of chip will already be blank (FF) *, so no need to expand file, but you can if you want (Fill with FF to 1MB hex 1024kb/100000h)
* Unless chip was used before, if this is case, then erase chip in full before flashing in vBIOS, or make vBIOS 100000h with all FF padding after actual vBIOS ends

@lordkag Your tool told me to so... here ya go. Don't know how helpful this actually is though.

Zitat von boombastik im Beitrag #911

---

Basically gtx580 support uefi but in this card you cant do anything because it has small bios chip.

---

Hello everyone how to update Gop drive vga vega 64 bios? updata AMD GOP 2.9 please for https://www.techpowerup.com/vgabios/2024...8192.180110.rom

@forzic17 - I didn't see your request here until now but, I almost moved your other request into this thread
Anyway, I posted mod vBIOS for you here, where I first saw your request - MSI Z390 MEG ACE BIOS REQUEST (3)

The new rx590 gme has a newer uefi gop but i cant find the vbios

Dataland HD 7750 1024 MB without efi,
Can you help me join?

Could you mod rx 580? Could you mod rx 580 ? Linked original vbios. Could you mod rx 580? I used the tool but i would like to make it uefi only not legacy !

Hi guys, just wanted to report these apparently new gops 0x5000B 0x5000D and 0x5000E for turing cards just found them on some random bioses i had on an hdd, hopefully they can help contributing to the database.

Also wanted to ask, is there a way to modify vbios values like for example maximum allowed power draw, voltage ranges, frequencies and so on for turing bioses?

Anyways thanks for the tool lord, here there are the 3 bioses with the new gops, hope this helps :)

http://www.mediafire.com/file/19n0uxi3rv...ew_gops.7z/file

Here is the updated version :

AMD and Nvidia GOP update (No requests, DIY) (60)

@enljm115
The file size you provided is a little strange, but I updated your file and the file downloaded from techpowerup

@podkaracz
Only need to set UEFI in the main board BIOS. For details, please read the operation manual of the main board

hey all, I am new to this situtations. I couldnt make it work the GopUpdater program on wiindows 10 it opens and closes. I have a gtx 680 that is flashed for Mac. now i want to use it under opencore and windows coz my windows efi installation gives error.
If i post my GPU rom here could you please help me about adding GOP section? I am adding gpu-z screen to see what i got.

Try this please.

It seems fine, boot screen has gone :) but i will try with efi installation in a few hours, let you know. Thanks a lot ;)