Hello all!
I have MSI N570GTX-M2D12D5 videocard with No UEFI Support.
I wont make it UEFI GOP friendly (for GPU passthrough via OVMF in qemu-kvm).
I grab ROM by nvflash.exe util and trying patch it by GOP_Updater_1.9.7.5.rar (GOPupd.bat) but i have not found case for my GF110 variant.
I see only (2 = GF10x) and (3 = GF119) but no GF110.
Can you help me to patch my ROM file?

Thank you,

Successfully updated with the "GOP_Updater_1.9.7.5" and flashed using the "AtiTool v2.71", my backup graphic card "ASUS R9-270X DC2T 4G" (Pitcairn/Curacao XT) and my main graphic card "ASUS DUAL RX480 O4G" (Ellesmere) to latest available GOP with the "AtiTool v2.77", ...
Don't forget to backup your main vBios before in case.

Has anyone flashed and the video card stops outputting video after a few seconds or minutes into Windows? I exported my bios via GPU-Z ran it through this updater and uploaded via ATIFLASH 2.71 via DOS. It worked all night running OCCT PSU test but I came back to wake it from sleep this afternoon and it started going dark on me. I have restored the original non UEFI GOP BIOS but it still does it. Any thoughts?

The card is MSI 7870 GHz Edition OC R7870-2GD5T/OC

I reset the drivers, after seeing messages about the driver restarting in the event logs. So far so good. Haven't rebooted yet but this may be the issue.

Nope, spoke too soon. Rebooted and it went back to it's antics.

found a new AMD GOP version :)

I also added lordkag's hack to this version. Still does it's magic, thx @lordkag.
Device id at offset 0x22-0x23 is 67DF (470/480/570/580); has to be changed for use with other cards.

Zitat von dani_tx im Beitrag #368

---

Hi,i recently upgraded to a Pascal GPU and from what i've read their vbioses are locked and now i'm worry that if i try to update the uefi/gop it might brick the card.My question is did anyone here had a success flashing it if yes if it's not too much trouble can you post short tutorial on how to(just need the flashing part,i know how to do the rest).Thank you.

---

Zitat von PhatAgent im Beitrag #383

---

How is the pascal GOP update going to work?
Won't the firmware be 'modded'; cards don't work with modded vbios.

---

Zitat von asto im Beitrag #369

---

Since I’ve done that in my GTX1080, updating the GOP from 30004 to 30008 without any problem and it boots purely fine in uefi mode with csm=off and sb=on, It shouldn’t be of any problem.
No specific procedure need to be performed, just drop the original bios on the bat, get the modded bios, find a nvflash and flash it in.
But of course I can’t guarantee that it will work 100%

---

Zitat von hellm im Beitrag #396

---

found a new AMD GOP version :)

I also added lordkag's hack to this version. Still does it's magic, thx @lordkag.

---

Somewhat similar to recent posts, here is my adapter info (PowerColor Red Dragon Radeon RX 560 4GB - Although should probably be named 560D due to the 896 Stream Processors)

Used GOPupd (version 1.9.7.5 although version showed is 1.9.5) from post #msg43131

************************* GOPupd 1.9.5 *************************
 

************************ Update EFI GOP ************************
 

***************** Drop VBIOS file on this .bat *****************
 

Dumping info from = ROM-original.rom
 

ID of ROM file    = 1002-67EF
 

***************************************************************
***         Extracting with UEFIRomExtract by AndyV         ***
***************************************************************
 
Found compressed EFI ROM start at 0x58
Input size: 58792, Output size: 106040, Scratch size: 13360
 
---------------------------------------------------------------
 
***************************************************************
***                Extracting with GOPupd...                ***
***************************************************************
 
AMD GOP 1.64.0.15.50  LibBuild ----  Dated: Aug  9 2017 13:23:44
 
AMD_Build 1816  AMD_ChangeList 1445104  GOP BIOS_IDTF 0xDEADBEEF
 
Most likely signed by: Microsoft Corporation UEFI CA 2011
 
Machine Code   = x64
 
Checksum CRC32 = 8269532F
 
Note: The GOP file is not present in my database.
 
      You can help me by reporting it.
 
---------------------------------------------------------------
 
***************************************************************
***                Processing with GOPupd...                ***
***************************************************************
 
You have a newer version! Please report it in the forum!
 

---------------------------------------------------------------
 

Press any key to exit..
 
 

In the #GOP_Database I probably have to add something similar to the following?

1.64.0.15.50 - **** - Aug  9 2017 13:23:44 - 1816 - 1445104 - 0xDEADBEEF - Signed - 8269532F
 
 

Unsure what else is missing. Hopefully I did provided all of the above:
- a screen of the tool, so I know that it worked as intended and that you run it the way it was meant to be.
- a link to the original VBIOS, so I can have something to work it.
- a hash of the updated file or the updated file, so I can produce an updated file on my PC, manually check it, then compare the CRC.

I guess I could probably use magic from #msg45391 using AMD GOP 1.65.0.15.50 but missing a few pieces to make this all working? Help much appreciated!

GOP Updater 1.9.7.6

- Added latest AMD 1.65.0.15.50 GOP table.

Wow that was quick! Thnx very much for the udpate! It is really appreciated!

I gave it a try and received the following message:
Warning! Your VBIOS ID 1002-67EF doesn't exist in latest available GOP!


Still, I was able to patch my original firmware to update GOP to 1.65.0.15.50 and it boots OK in UEFI (CSM disabled)! I haven't tried using fast boot as UEFI really is my main concern.

I tried patching my modified timming ROM I had previously done (wich provides good results for me) but it failed to boot in UEFI with GOP updated to 1.65.0.15.50. It did however boot in Legacy BIOS just like it used to using mod-ROM + original GOP 1.64.0.15.50.

So end-results are:
- Revert to original: UEFI OK!
- Original + Updated GOP 1.65.0.15.50: UEFI OK!
- Modified Timings (using original GOP): Legacy BIOS only
- Modified Timings + Updated GOP 1.65.0.15.50: Legacy BIOS only

I guess I'm missing something in order to get modified timmings ROM to work out in UEFI using latest GOP...

Edit 1: Here is a screenshot of the differences between:
- Original (left)
- Modified Timings (center)
- Modified Timings + updated GOP (right)


Edit 2: Here is the subsequent error message (Data after ROM and not part of EFI! Please report it!) using version 1.9.8:


Again, thnx very much for your time! Help really much appreciated!

@th0ma7

Redownload again the gop updater, I've fixed that entry.

I found a typo. Tool has offering Kepler GOP 0x10036, but it have "only" 0x10034.

************************* GOPupd 1.9.7.6 *************************
 

************************ Update EFI GOP ************************
 

***************** Drop VBIOS file on this .bat *****************
 

Dumping info from = HP-Quadro-K4000-3GB-Hynix-GK104.rom
 

Found Nvidia IFR header before ROM start, size 0x600
 
ID of IFR header  = 103C-079C
 
ID of ROM file    = 10DE-11FA
 

***************************************************************
***         Extracting with UEFIRomExtract by AndyV         ***
***************************************************************
 
Found compressed EFI ROM start at 0x50
Input size: 69040, Output size: 133536, Scratch size: 13360
 
---------------------------------------------------------------
 
***************************************************************
***                Extracting with GOPupd...                ***
***************************************************************
 
Nvidia GOP 0x1002D  Variant 0x0000000000000004 = GK1xx
 
Dated: Apr 23 2014  Changelist 18350298
 
Most likely signed by: Microsoft Corporation UEFI CA 2011
 
Machine Code   = x64
 
Checksum CRC32 = 7B178AA3
 
---------------------------------------------------------------
 
***************************************************************
***                Processing with GOPupd...                ***
***************************************************************
 
Latest available GOP is 0x10036
 

Do you want to update GOP to 0x10036? Y for yes or N for no: Y
 
  EFI is NOT last image!
 
  Fixing ID, last-image-bit and checksum for EFI image.
 

File "HP-Quadro-K4000-3GB-Hynix-GK104_updGOP.rom" with updated GOP 0x10036 was written!
 

---------------------------------------------------------------
 

Press any key to exit..
 
 

It's very strange as I've checked both efirom and checksum inside the txt database and they matches. So what have you ckecked to say that it has only 0x10034 ?

Yes, after update to 0x10036 is upgraded only to 0x10034.