Hi Lordkag et al,

I am trying to update a GTX 460 (GF104), I'm guessing this is supported due to a GOP being labelled GF10x.

I used GopUpd to add the GOP to my firmware, however when using the firmware with QEMU & OVMF (and the romfile option) the system doesn't display anything and one core is maxed out.

If possible could you confirm if the GTX 460 is supported by GopUpd, and if so, if the attached firmware is valid.

If anyone needs it, I've updated GOP Updater including latest GOP modules.

@jholder

I've updated both GTX460 bios (1024 and 768 Mb version). Try the right one for your graphic card.

@ LordKag, This is the second time I use your TOOL and thanks for that. I went ahead and update the VBIOS from my EVGA GTX 980Ti Hyb model, but I think there were a difference in size, I don't know I just point out the picture w/ a red lines so you can check upon it and let me know if everything its fine. This vBios at first was dump using GPU-z and use it to MOD its clockspeed so this time around I did use NVFlash to avoid the patting but since it was dump at first pulled from the card my guess is that the patting was increase when dump the first time use, you can correct me if I'm wrong.

Let me know if its a go to FLASH, TIA.

EDITED: An update from my own work, thank again LORDKAG. I went ahead and tell my self: "I'm not afraid, Fear I leave it hidden in the drawer". And flash the updateGOP vBios in which already was Modded w/ a OC settings and everything so far is like it suppose to, silky smooth. But I did use the NVFlash tool from one of this posted and I was having problem w/ the CERTIFICATE check, so I went ahead and use a NVFlash Win10 Tool that found and bingo that one did the trick. I'm going to uploaded for anyone else benefit.

Whoever use and download the file that I posted its from the same site that I got the file from, JOEDIRT. Also Windows 10 users use the folder that said Win10 and that one is the one that I refer that did the trick on me, cause I'm using Windows 10. So the other one I didn't test it.

New GP1xx (Pascal) 0x30006 UEFI GOP, including GOP Updater 1.9.7 compiled by myself with the new UEFI GOP table.

Ok mate, I'll update it as 1.9.5.x

Hello My graphics card is GTX560Ti, GPU number is GF114. Can I use this software to add the UEFI module? If so, how should we choose?

Yeah i have the same question. Have 560TI (GF114). Is it possible to add uefi support there. I really need it for my kvm pci-passthrough experiments.

You have to use the GF1xx UEFI table.

Thank's for the great topic.... I have succsesfully update my GOP to the last one.....
ASUS 970 STRIX.....

Hi Sylar79,

Can I use this with ASUS Nvidia Titan X the old version not Pascal.

Thanks,
ZombieKIL

Yes, of course.

I can not download just goes to page with blank page with ads up the top.