try oprekin()com me using same mobo as u videos youtube/indicator27

Zitat von alecz im Beitrag #8

---

Hi Guys, thanks for all the replies. I don't know why I didn't get the notifications, but that's why I'm responding so late.

Unfortunately, it is not very clear to me what the solution is. I did put these drivers in the bundle: hxxps://mega.nz/file/0UdwDDqb#uRqqMBD_w7...VCT3k9Uuo0-fX9U
Should I try with this ISO: hxxps://mega.nz/file/tQtGWQQY#biMoCr3S1c...3N4zAci-OvfRSdQ ?

I am not sure what "use PE system with WinNTsetup or DSIM++" means. Is there a thread that I can read on that?

Lastly, if I already have the "almost working" Windows install, is it possible to copy the driver files somewhere so Windows will use them up on the next boot? (I can dual boot in Linux to copy the files).

Thanks in advance!

---

I gave up on trying to get Windows 7 on the ASUS B560 mobo. The replies I received were not helpful enough to point me in the right direction.

I wouldn't keep my hopes up for Windows 7 with B560 + 11400F if I were you. Go Windows 10, Linux, or an AMD combo.

Dear @canonkong , I am still looking for Win7 USB Drivers for a Gigabyte B560M DS3H Mainboard. I have searched a lot and installed a lot of different drivers, but nothing works. I saw above, that you got it working. Could you give me a hint, where to find such drivers? Thank you so much， 祝你中秋节快乐！ Christoph

@lianpu
Use UpdatePack7R2, it can make the install image have usb and nvme driver. The chips driver can use win10 driver as they are only inf fake drivers.

@canonkong
Thank you so much for your feedback. My problem is, i can not make a re-install with an install image. I have ready win 7 64 installation on a hard disk with a highly complicated flight sim Setup. Hundreds of add-ons, tweaks, custom- made cockpit with many USB hardware installed etc.
So I need to install Win7 USB drivers into this running system, which I switched from an old main board to a gigabyte B560m board by just plugging in the old harddisk.

I cannot do a new install, years of installing and configuration will be gone...

That is why I am searching for USB drivers that i can install to get my USB ports running. Everything else works fine.

Maybe you have an idea where I can get such drivers?

Thanks so much!

Christoph

Zitat von lianpu im Beitrag #21

---

@canonkong
... I have ready win 7 64 installation on a hard disk ... which I switched from an old main board to a gigabyte B560m board by just plugging in the old harddisk.


... I am searching for USB drivers that i can install to get my USB ports running. Everything else works fine.
...

Christoph

---

Yes, I just switched the HDD to the new board. I had to install a few other drivers after the startup on the new board but they were not really difficult to find. Although a bit tricky without USB and only one PS2 port for mouse OR keyboard. Once you have internet access, you can use TeamViewer to controll the PC without USB mouse or keyboard from other PC. But I am still searching for installable USB drivers... Christoph

Hey all, I am in the same boat as lianpu. My good old desktop recently died (could be CPU or GPU or mobo, who knows - it would just keep rebooting sometimes making it to the desktop) so I finally decided to upgrade. Got an ASUS B560-A mobo, 11th gen Intel with integrated graphics and some new RAM. Put it all together, connected my two HDDs and nothing past BIOS.

This morning I decided to throw in my old annoying GPU in the PCI-E slot which made the BIOS auto configure to enable compatibility mode and legacy settings for a few different things. Now it boots to the windows logo and then BSOD and restarts. From all I'm reading, it seems to me if I can just get the new USB 3 driver in there somehow, it would start up?
I JUST want to get into the windows 7 so that I can upgrade from there to windows 10 without losing everything.

Do you think doing the slipstream thing with a bootable win 7 drive will allow me to launch windows repair and thereby install the driver without having to clean install? Or is there another way to get the drivers on without loading windows at all? Can you just boot and run windows 7 from a usb without installing? (Ie, it uses all drivers from usb to launch and run)

I don't have an optical drive on the build OR the laptop I can also use. But I do have some usb sticks