Forum - RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up

Win-Raid Forum (Drivers - Firmware - Modding) � Special Topics � NVMe Support for old Systems � [HowTo] Get full NVMe support for all Systems with an AMI UEFI BIOS

Page 85 of 465 � Page 1 ... 80 81 82 83 84 85 86 87 88 89 ... 465 Page �

Topic settings

Print view

Jump to forum

General & Forum related Topics News / Announcements Forum-related Questions & Suggestions Off Topic Important Drivers (AHCI/RAID, NVMe, USB etc.) General: Storage Drivers (AHCI/RAID, NVMe and USB) Specific: Intel AHCI/RAID Drivers Specific: NVIDIA nForce Chipset Drivers (incl. AHCI/RAID) Specific: NVMe Drivers Other Drivers System Performance RAID Performance AHCI/NVMe Performance Solid State Drives BIOS Modding BIOS Modding Guides and Problems BIOS modules (PCI ROM, EFI and others) BIOS Modding Requests Reports: BIOS Modding Results Offers: Already modded special BIOSes Special Topics Intel Management Engine CPU Microcodes NVMe Support for old Systems Other Tools (not BIOS modding related) Interesting PC Hardware & Software OS related Topics Windows 11 Windows 8-10/Server 2012-2019 Windows 7/Vista/Server 2008 Windows XP/2000/Server 2003 DOS/Windows 3.X/9X/ME - Retro Gaming Other Operating Systems

#1261 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 5:59 am (Last edited: Wed Jan 11, 2017 12:47 pm)

@imsims:

How did your bypass the BIOS security? Can you describe this part to me? I haven't had success using methods I've found and I have the SABERTOOTH X79.

EDIT by Fernando: Unneeded fully quoted post replaced by the direct address to the author (to save space withinj this already very voluminous thread)

reply

#1262 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 6:34 am (Last edited: Wed Jan 11, 2017 12:44 pm)

https://www.manualslib.com/manual/415077...79.html?page=61

extract from zip and rename it SABERX79.CAP
and enjoy 960 pro on BEST chipset from last 5 years X79 :D

imsims has attached files to this post

sabertooth-x79-asus-4801._intel_4.3_marvel_1.0.1038_asmedia_0.97_nmveInt13.zip

reply

#1263 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 7:04 am (Last edited: Wed Jan 11, 2017 12:44 pm)

Hi, this my first post and i find this page because i needed support a new m.2 nvme ( Samsumg SM951 NVME 256 gb To be precise) in a z87 chipset and I am truly grateful with the people that made it possible, and Fernando for the kind help. So i am using this m.2 booting windows 10 whitout any issue. Just follow the #1 post guide and is extremely easy make it work, here´s a pic of my system.

Specs:
Gigabyte G1 Sniper 5 chipset Z87
i5 4690k
SM951 NVME M.2 with a Silverstone ECM20 adapter card

Thank you again
|addpics|cxo-1-bfab.jpg|/addpics|

reply

#1264 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 8:06 am (Last edited: Wed Jan 11, 2017 12:43 pm)

Zitat von imsims im Beitrag #1262
https://www.manualslib.com/manual/415077/Asus-Sabertooth-X79.html?page=61
extract from zip and rename it SABERX79.CAP
and enjoy 960 pro on BEST chipset from last 5 years X79 :D

Thanks for the quick reply @imsims
I updated the BIOS with your file and followed your instructions as well as the instructions on the first page but I was not able to locate the drive at all. Not even a "PATA SS" option came up.
Again, I can see the drive in Samsung Magic and in my Device Manager but I can't see it in my Computer's Hard Disk Drives list nor can I see it in BIOS.

I was looking in my bios and I noticed all of my PCIE slots were set to GEN3. Does this matter? I tried setting them to GEN2 but it didn't seem to make a difference.

reply

#1265 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 9:51 am (Last edited: Wed Jan 11, 2017 12:40 pm)

Zitat von imsims im Beitrag #1262
extract from zip and rename it SABERX79.CAP
and enjoy 960 pro on BEST chipset from last 5 years X79 :D

For some reason I was able to change the filename of the file you shared with me to SABERX79.CAP and just plug it in the back and the USB BIOS Flashback worked but when I wasn't able to see the SSD in BIOS I went back and tried a different modded BIOS and named it SABERX79.CAP and was not able to get the USB BIOS Flashback to work with that version.

What did you do to your modded BIOS that you were able to get it to load with USB BIOS Flashback?

reply

#1266 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 10:17 am (Last edited: Wed Jan 11, 2017 12:41 pm)

UPDATE:
I found out how to make the Samsung 960 PRO visible under Hard Disk Drives in my Computer by doing this: http://forum.crucial.com/t5/Crucial-SSDs...ows/ta-p/111492
So now I can see the drive. I tried to use @imsims modded bios and the instructions in the OP but I still don't see it in the BIOS.

reply

#1267 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 10:20 am

usb stick should be 8 Go Max... try again and format it in fat16 [with 4Go or less ] or fat32 ..

reply

#1268 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 11:08 am (Last edited: Wed Jan 11, 2017 1:16 pm)

@TrackStar
you will not see hdd on hdd list as it is not an sata hdd!
you will see it in the boot list UEFI if it has a UEFI boot partition, done AFTER you will install windows on it.
like that ->

just to be clear, the bios mod nmve module JUST scan PCI-E bus to find UEFI boot partions to be able to boot from PCIE "devices"
that in OUR case are HDD !!

Hope i have been clear .... :D

PS: what i have done is JUST use 3 tracks from Asus x79 Deluxe bios 4805 in the Asus X79 Sabertooth 4801
becouse ASUS is lazy to update its products bios!

meanwhile i do not understood why asus update X79Deluxe Motherboard and NOT Sabertooth that it was an expensive product!!!

PS2: i think my mod is better than Fernando one (sorry for saying this .. :D) becouse it replicate ASUS near-same-motherboard X79,
hope Asus has tested it on X79 deluxe :D

EDIT by Fernando: Unneeded blank lines removed and inserted image resized/attached via Forum Software (to save space within this already very voluminous thread)

reply

#1269 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 1:03 pm

@weissdaniel:
Hello Daniel,
welcome at Win-RAID Forum!
If you get the message "File size exceeds volume size" while trying to insert the NVMe EFI module into the BIOS, you have to remove another EFI module from the BIOS before trying it again.
A very good candidate is the BIOS module named "SataDriver" (sometimes named "RaidDriver"), which is only needed and used, if the Intel SATA Controller has been set to "RAID" within the BIOS and the OS has been installed in UEFI mode.
Good luck!

@TrackStar:
Welcome at Win-RAID Forum!
It is fine, that you finally succeeded and got the NVMe SSD booting!

@sgt_meowmers:
Welcome at Win-RAID Forum!
Congratulations, that you succeeded by just following the instructions given within the start post and without the need of any further help!

Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#1270 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 3:44 pm (Last edited: Wed Jan 11, 2017 3:46 pm)

i agree with you imsims , asus is not so great , i was member of the forum about "high class product" because i registered my product and became vip...but one day for a post i did , i was totally banned ; banned by a little scum not even moderatator...
it s some brand like M$ or intel or samsung-phone that are "feeling like being very above their customers..." , latest example i have about intel is its drivers for network ... the public release has one win10 driver for the chip of the sabertooth x79 that is a 1 Gb/s , i have a tyan and a supermicro boards with two others chips of the same generation...but they are no driver for them ..except if i download the driver from supermicro : then there is one for its chip ...or force the install of the driver using the x79 driver with the tyan...
that stinks to do things like that moreover when they do so much profits...
by the way as i was banned from asus i decided to never buy again this brand even if they make the "best" ...by now i plan to go gigabyte [because of apple os] , i wait pci-e gen4 boards and the waterblock for it ;']

reply

#1271 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 5:23 pm

How do I install a new copy of Windows onto the SSD without being able to detect the SSD in the Windows installation program?

Is there a way to do it while running Windows?

reply

#1272 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 6:20 pm (Last edited: Wed Jan 11, 2017 6:47 pm)

Zitat von Fernando im Beitrag #1269
@TrackStar:
It is fine, that you finally succeeded and got the NVMe SSD booting!

Actually all I've been able to accomplish is being able to see the drive in Windows. I have been able to do nothing else. I still need help!

reply

#1273 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 6:46 pm

Zitat von TrackStar im Beitrag #1271
How do I install a new copy of Windows onto the SSD without being able to detect the SSD in the Windows installation program?

Which Windows OS are you trying to install onto which NVMe SSD?
Did you boot off the installation medium in UEFI mode?
Did you get any error message?
Are you sure, that you got the modded BIOS with the inserted EFI NVMe module successfully flashed?

I am sorry, but I thought, that you got your NVMe SSD already bootable. There were too many new posts within this thread.

reply

#1274 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 7:02 pm (Last edited: Wed Jan 11, 2017 7:21 pm)

Zitat von Fernando im Beitrag #1273
Which Windows OS are you trying to install onto which NVMe SSD?
Did you boot off the installation medium in UEFI mode?
Did you get any error message?
Are you sure, that you got the modded BIOS with the inserted EFI NVMe module successfully flashed?

I am trying to install Win7 onto a Samsun 960 PRO.
I tried booting from the USB with the copy of Win7 on it in UEFI mode but it does not detect the SSD in the installer.
No error messages.

I am positive I have the modded BIOS that @imsims provided me a few comments ago installed properly. (We have the same MOBO)

However, I have been unable to install the modded BIOS that you had us create on page 1. I haven't been able to figure out how to bypass the Security to install it.

reply

#1275 | RE: [Guide] How to get full NVMe support for Intel Chipset systems from 6-Series up datum

Wed Jan 11, 2017 7:26 pm

@TrackStar:
As long as you haven't successfully flashed the modded BIOS by using the ASUS USB Flashback feature, you will not be able to get the NVMe SSD bootable.
Furthermore you will need to load the latest Samsung NVMe driver. Otherwise the Win7 Setup will not be able to detect the Samsung NVMe Controller.

reply

Patch Bios HP 800 SFF G1 in order to Support NVME SSD PCIe (Booting) � � [Problem] NVMe Support for TYAN S5512WGM2NR running TrueNAS Scale

Page 85 of 465 � Page 1 ... 80 81 82 83 84 85 86 87 88 89 ... 465 Page �

Please enter a reason for warning.