MEManuf passed all areas. So it doesn't seem to be an ME issue after all though the message is still there.

Fernando, you homepage is very informative, thanks for your engangement.

I'd like to mod an Asus PZ9 PE Board, it comes with two 2011 sockets and is a server/workstation board. It wasn't a problem to follow the instructions on your first side.

Before I will try to flash my Bios, do you have an idea if these modules also ran on this platform ?? I am not deeply in hardware and don't know what is needed to runn these uefi modules?

I already purchased a chep flash programmer and won't start before i had a few working Roms in stock.

My System Build well need some time, i'll promise to write if it is a succsess.
If not ill write anyway

I am a little bit confused by the selection of Bios settings which could be related to the NVME disk.

Is a option ROM needed on the NVME drive (like on my "old" Revodrive with a SIL3124?)



Which options should i choose here?



And last but not least, is a uefi compatible grapics card needed?

Is the warning from the MMtol 5.0 "Saving secure capsule as unsigned" normal?

Sorry for these kind of "noob" questions. If everything works, i will paypal you a bear!

Just a quick success message drop:

I inserted NvmeExpressDxE into BIOS F11 of the Gigabyte GA-Z87M-D3H and I'm now running Windows 10 on a Samsung SM951 NVMe as the lone/system drive.

As the module didn't fit inside the regular volume #2, I had to delete something. I went for these modules:
- OemLOGO
- MyOemLogo1
- MyOemLogo2
freeing 12KB total, allowing for the insertion of NvmeExpressDxE.

I didn't notice any drawbacks so far, Windows installation instantly recognized the drive and finished in well under 10 minutes.

Thanks again to Fernando for the great and concise tutorial!

Wioth Tool version 4.51 id did not pass the security check in EZ Flash.
So should i ignore the warning in 5.0?

Greetings Stefan

I just wanted to get some details that this might work.

I purchased 5 Intel SSD 750 AIC drives. I have 5 machines I'd like to use them in. They are all the same DELL Precision T5600s. In their day they were pretty nice machines.

I want to ask if Fernando's lengthy post on "How to get full NVMe support for Intel Chipset systems from 6-Series up" is a viable option for this combination. And if there are any new steps or newer updates I need to be aware of.

Thanks for the time.