Forum - RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

#6706 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 12:29 pm (Last edited: Thu May 06, 2021 1:41 pm)

Wen I boot with 1 is once at 100 times boots normally.
Case 2 and 5 - SATA drive.

The PSU is SilentiumPC Elementum E2 550W

btw thanks for such fast reply 😀
When I go back home I'll try remove mod and use Clover solution.
I wonder if SATA are disabling while pcie is in use.
I have 8 SATA ports, so I'll check this first.

reply

#6707 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 2:32 pm

Hi,

It is brand new. Only tried by me to configure in pc�s.
I have formatted it a zillion times.
I do it either from win10 installer (repair tools) -> CMD-> Diskpart-> list disk -> select disk «x» -> Clean -> convert GPT -> exit.

So either directly from the installer or from another win10 install (that way through diskpart)

reply

#6708 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 3:24 pm

@ck90:

Zitat von ck90 im Beitrag #6707
I have formatted it a zillion times.

One correct formatting would have been enough.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6709 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 3:42 pm

All SATA ports disabled and power from disks removed, still powers on for nanosecond.

reply

#6710 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 4:11 pm

@jw96: Although it is very unlikely, that your issue has anything to do with your modded BIOS, please attach the original and your modded BIOS. Then I will do a look into them both.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6711 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 4:26 pm (Last edited: Thu May 06, 2021 4:27 pm)

Here it is: solidfiles[dot]com/v/78pAjYq5Y7BYv

reply

#6712 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 6:10 pm

Tried original BIOS and Clover - same, poweroffs about milliseconds after power on.

reply

#6713 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 9:26 pm

Zitat von jw96 im Beitrag #6712
Tried original BIOS and Clover - same, poweroffs about milliseconds after power on.

No wonder, you have flashed a faulty BIOS!
Here are the pictures showing the main UEFI BIOS Volumes of the original BIOS (left Pic) and of your modded BIOS (right Pic):

As you can see, the first UEFI BIOS Volume has been doubled by the BIOS tool. That cannot work and you can be happy, that your mainboard hasn't been bricked by the flashing procedure.
Question: Which BIOS tool did you use?
I just have inserted myself the NvmExpressDxe_4.ffs module uncompressed into your original mainboard by using the AMI MMTool v4.50 and got the correct UEFI BIOS Volume structure (identical with the original BIOS):

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6714 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 11:16 pm

I used MMTool 4.50.0.23, I'll try again.

reply

#6715 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 11:45 pm (Last edited: Thu May 06, 2021 11:45 pm)

New, flashed, selected reboot option, inserted adapter with ssd, then flashed again and rebooted, so pc wasn't powered off. Here is new moded bios. https://www.solidfiles.com/v/g6nKag6n4VKPx
Powering off now... Fingers crossed.

reply

#6716 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Thu May 06, 2021 11:51 pm

@jw96: Your freshly modded BIOS seems to be fine.
Enjoy it!

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6717 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Fri May 07, 2021 1:04 am

Nothing changed after powering off. I don't know what's wrong. Kek

reply

#6718 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sat May 08, 2021 10:32 am (Last edited: Sat May 08, 2021 10:32 am)

Hello, I wanted to install the NVMe module into my motherboard BIOS but it seems that even the compressed small version doesnt fit, posting my BIOS here to see if someone can help me.

My motherboard is a P8P67-M (Non-Pro) Version and this is the link for the BIOS (Version 3703):

ht tps:// dlcdnets. asus.com/pub/ASUS/mb/LGA1155/P8P67-M/P8P67-M-ASUS-3703.zip
(Taken directly from ASUS site, this is the one that I used to update my BIOS, sorry to have to split the link, it didnt let me post it if I didnt)

Thanks in advance.

reply

#6719 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sat May 08, 2021 12:59 pm

@pchosm: Welcome to the Win-RAID Forum!
You are right - it is very difficult to get the NVMe module properly inserted, because the DXE Volume is already extremely full.
Since our BIOS modding Guru Lost_N_BIOS hasn't been online for some months, I recommend to post a BIOS modding request into >this< already existing thread and to ask the thread opener SKyRo for the NVMe modded BIOS for your specific mainboard (I only have seen there a modded BIOS for the ASUS P8P67-M Pro).
Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6720 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sat May 08, 2021 3:53 pm (Last edited: Sat May 08, 2021 4:25 pm)

@pchosm

I do not provide Asus bios mods for motherboards without BFlashBack, i can tell u that this bios, edited with AMIBCP and removing all others language string besides EN, after will have enough space in volume for the
small NVMe module with MMtool insertion.
Even more space on volume for the standard NVMe module inserted as compressed, if updating cpu mCODES in UBU still removing strings.
So its ur decision/risk to make urself the mod and flash it.

Donations via PAYPAL / REVOLUT, if u think the guy deserves it, else to the Win-Raid community on the bottom of the page, as it deserves for all the gathered information.

reply

Please enter a reason for warning.