Forum - RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

#6481 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sat Feb 20, 2021 9:20 am (Last edited: Sat Feb 20, 2021 9:31 am)

@onuracengiz I need a Help not a demagogic advice.
TNX
But as i see from 1st post, this is thread just for modding BIOS and not for a flashing tools as mentioned...

Bad Luck

reply

#6482 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sat Feb 20, 2021 10:49 am

@geoneo: Welcome to the Win-RAID Forum!
>Here< is the thread about how to get a modded AMI UEFI BIOS properly flashed.
Please read the start post carefully. If you have any additional questions or problems regarding the BIOS flashing, you should post them into the linked thread.
Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6483 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Feb 21, 2021 9:29 am (Last edited: Sun Feb 21, 2021 9:37 am)

@Fernando:

Its okay if rufus wont let you format the windows iso file into fat32. I simply downloaded the iso file which was over 5GB and let rufus burn the same like this the only change being NTFS. Please check the same and update the guide to benefit others.

Hats off again to this wonderful guide. Thanks..

reply

#6484 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Feb 21, 2021 12:21 pm

@dirtrider: Thanks for your comment regarding the file system (FAT32/NTFS) of the USB Flash Drive to be bootable in UEFI mode.
According to your advice I have added an "Important note" to the related part of my Guide (= start post of this thread) to make it as clear as possible for the users. Is it ok for you?
By the way - the size of the ISO file, which is used as source for the creation of the bootable USB Flash Drive, doesn't matter (can be over 4 GB). The FAT32 formatting is not possible, if any file inside the Image exceeds the 4 GB border (it is usually the file named INSTALL.WIM).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6485 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Feb 21, 2021 5:06 pm (Last edited: Sun Feb 21, 2021 6:19 pm)

I'm looking for a modified bios for NVMe SSD for Gigabyte GA-Z87M-D3H
If anyone has this bios let me post it. thanks
I'm using BIOS F11
My drive is a Samsung 970 EVO Plus 250GB

reply

#6486 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Feb 21, 2021 6:25 pm

@thebullet: Welcome to the Win-RAID Forum!
This is the thread for users, who want to do the requested work themselves. That is why I had written a step-by-step guide into the start post.
Users, who want to get an already modified BIOS, should post their request into >this< Sub-Forum. Maybe you can find there an already NVMe modded BIOS for your mainboard.
Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6487 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Feb 21, 2021 8:47 pm

Zitat von Fernando im Beitrag #6484
@dirtrider: Thanks for your comment regarding the file system (FAT32/NTFS) of the USB Flash Drive to be bootable in UEFI mode.
According to your advice I have added an "Important note" to the related part of my Guide (= start post of this thread) to make it as clear as possible for the users. Is it ok for you?

Perfect.

reply

#6488 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 22, 2021 8:15 pm

Hello. I would like to know if it is possible to modify the BIOS of an ASUS F2A85-V Pro board with UEFITool so that it recognizes an M2 NVMe.
I have tried but windows cannot boot from said drive. You may not have done well or can't stand it.
Sorry for my English.
All the best.

reply

#6489 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 22, 2021 8:29 pm

Should be possible with mmtool.if you cant do it yourself,open up a request in bios modding thread

reply

#6490 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 22, 2021 8:33 pm

Thanks.
I'll investigate, but I don't know if I'll be able to.
If someone can help me I would be so thankful.
Greetings and thank you.

reply

#6491 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 22, 2021 8:36 pm

Good luck

reply

#6492 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Fri Feb 26, 2021 7:35 pm (Last edited: Fri Feb 26, 2021 7:53 pm)

Hello everyone.
First of all, thank you very much, @Fernando and everybody who worked on this guide. It's great! It's very helpful and it's pretty clear, so I read it easily and with full understand. I highly appreciate it.
But I have a problem with the last step (windows installation) :(

- Motherboard - MSI Z87-G43 Gaming
- BIOS - E7816IMS v10.7
- SSD - Samsung 970 EVO
- PCI-E adapter - Noname

- opened my BIOS image using MMTool
- inserted NvmExpressDxe_4.ffs to the BIOS image
- saved it to my USB drive
- verified it using UEFITool (all of the Pad files were in the same place)
- updated BIOS using m-flash
- downloaded official Windows 10 image using MediaCreationTool
- made bootable USB flash drive using Rufus
- unpluged all other disks and devices
- installed windows 10 on my NVMe SSD

- BIOS sees the Samsung Solid State Storage Controller device in the PCI-E slot (I can see it in Board Explorer; before it was an Unknown device here)
- BIOS sees the PATA option to Boot.

- When I use the NVMe SSD disk only, Windows Boot manager is not recognised at all and I can't boot anything
- When I plug the SATA Disk, Windows Boot manager works (loaded from old disk), it recognises Windows on the new Disk but it's booting with the error (file: \Windows\system32\winload.efi; error code: 0xc000000e). I tried to run recovery but didn't get any results.

Could you please suggest what I can try to do now?

I know that this thread is about BIOS modding not about Windows, but any advice will be helpful because I'm newbie :[

reply

#6493 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Fri Feb 26, 2021 8:00 pm (Last edited: Fri Feb 26, 2021 8:00 pm)

@o_privet: Welcome to the Win-RAID Forum!
I don't see any mistake.

Zitat von o_privet im Beitrag #6492
- installed windows 10 on my NVMe SSD

Please explain how you got Win10 installed onto your NVMe SSD.
If you cannot boot anymore, re-do the OS installation, but don't forget to let the Setup delete all existing partitions of the NVMe SSD and create a new OS partition once the NVMe SSD is detected by the Setup.
Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6494 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Fri Feb 26, 2021 9:04 pm (Last edited: Fri Feb 26, 2021 9:37 pm)

Zitat von Fernando im Beitrag #6493
Please explain how you got Win10 installed onto your NVMe SSD.

I selected USB flash drive to boot in BIOS . Then I just followed steps in the Installation wizard.

Zitat von Fernando im Beitrag #6493
don't forget to let the Setup delete all existing partitions of the NVMe SSD and create a new OS partition once the NVMe SSD is detected by the Setup.

Other disks weren't displayed here, but NVMe SSD was names like a disk #3
I deleted all 3 partitions of the disk and created it again. 3 partitions appeared.

reply

#6495 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Fri Feb 26, 2021 9:42 pm

Zitat von o_privet im Beitrag #6494
I deleted all 3 partitions of the disk and created it again. 3 partitions appeared.

And then? What happened during the first reboot? Can you now boot off the NVMe SSD? Is there a "Windows Boot Manager" listed within the "BOOT" section of the BIOS?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.