Thanks Fernando for such a quick reply.
Could you advise where can I get the instruction how to get the bios into zip file? I can see that previous user were uploading it via cab filee which google says that it is only for asus motherboards.
Answering the question of win10. Yes, the laptop came with win10 installed and working correctly. But now it has been removed and win7 installation files are there already.

Reading the mentioned article, it contain an information for disconnecting the VGA cable which my laptop does not have any of it. The only cable which stick to the laptop is power supply. But like I said, if the laptop runs with battery it goes much further with boot up, like i.e. installation is able to finish, but if cable is connected, the blue screen appears straight ahead without possisibilty even to start win setup or boot up any other mode. keeping in mind that the bluescreen appeared after applying hotfix - bcs previosly the win7 setup was unable to see SSD.

@Fernando :
F2 version of Gigabyte GA-B85M-D3H-A (rev. 1.0)
Crucial M.2 NVME P1
MMTool 4.50.0.23
NvmExpressDxe_Small in compressed form
I get PATA SS in boot list but cant boot from the same even when its the only drive connected

Someone please share any info. about securely wiping ssd. I've tried the crucial storage solution but it seems not to support my ssd, I came across partedmagic but its not free.

your modded version looks fine to me.could you try this one?
GA-B85M-D3H-A (rev. 1.0) based on bios version F3a with updated microcodes,used NvmExpressDxe_Small (cause of size warning)
dont forget to do a cmos reset

@onuracengiz: I did try with it though with cmos reset this time. I am unable to insert as is even the small file and had to compress it. Same results, windows intallation shows a message that my pc doesnt support booting from this disk. Is there a way, other than os installation, i can test if it boots or not ?
I am using this adapter . It is detected in disk management and I can even see the sensors in HWINFO.

I can still get a refund on the drive but unable to return the same without securely wiping it. Plz help.

I have successfully inserted it in without compressing.have you tried the given bios file?

yes. same result. updated the above post with my bios setting pictures.

saw the pictures now,
setup literally tells you to enable controller in bios settings.so lets do that;

@onuracengiz thanks a lot for your efforts. What format should the drive be? Should it be initialised ?? I'm attaching the SATA menu pictures.

@Fernando:
Both fastboot and secure boot turned off. Other storage unplugged. When I try to boot in UEFI only the result is this. I tried to change boot mode selection to this and what i get is this then i select non uefi flash drive. Again the same error even after i create a partion to it.

Can a clone ssd be used? or it has to be fresh installation only? I could boot a cloned one in my other system which has a nvme slot although i had put my nvme in pcie x4.
Should i just get a legacy support nvme or a sata ssd? I've been trying to wipe my drive but to no avail.

@Fernando Sorry i think i was not able to make myself clear. When i select the upper option(UEFI Sandisk) i get the error page.

@Fernando:
I used the official source only which directly made my drive bootable and it works fine when i boot it non uefi. Should i get the iso file and burn the same in a particular format? Im attaching the screenshot of the drive properties.