Forum - RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

#6436 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 1:07 pm

@Fernando Here they are

suspended has attached files to this post

reply

#6437 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 1:51 pm

@suspended: Thanks for the upload of the BIOS files.
The insertion of the NVMe module seams to be done correctly and I couldn't detect any deleted/added/moved stock modules.
Next question: Did you unplug all other HDDs/SSDs except the NVMe SSD and choose the required BIOS settings according to the start post guide before you started with the OS installation onto the NVMe SSD?

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6438 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 2:29 pm (Last edited: Mon Feb 08, 2021 2:37 pm)

Yes, i removed all HDD and SSD exept the new NVME.
I try different settings in bios like CMS enabled and disabled, because i've read that 950 Pro are natively bootable in LEGACY mode, and i want to try that with my 970 EVO Plus.
I try to install windows even several times with SATA mode disabled, AHCI and RAID and with CSM again Enabled and disabled. Even with enabled CSM different settings for PCI-E Expansion Devices (UEFI only and LEGACY OPROM only)
And even try also fresh install with Secure Boot, enabled and disabled

reply

#6439 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 4:30 pm

Zitat von suspended im Beitrag #6434
I try different settings in bios like CMS enabled and disabled, because i've read that 950 Pro are natively bootable in LEGACY mode

It is the Samsung 850 PRO, which is bootable in Legacy mode.
and i want to try that with my 970 EVO Plus.

Zitat von suspended im Beitrag #6434
I try to install windows even several times with SATA mode disabled, AHCI and RAID and with CSM again Enabled and disabled. Even with enabled CSM different settings for PCI-E Expansion Devices (UEFI only and LEGACY OPROM only)
And even try also fresh install with Secure Boot, enabled and disabled

And what happened after each test? By the way - choosing the "LEGACY OPROM only" setting was nonsense after having inserted an EFI NVMe module into the BIOS.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6440 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 7:14 pm (Last edited: Mon Feb 08, 2021 7:24 pm)

After every one try the result is the same, windows is hanging on "getting devices ready" (black screen with loading circle)
Should i try to mod the bios with different NVME DxE mod ?
Why i cant aces the 970 Evo Plus even when i boot from other SSD ?
Other OS like Ubuntu dont see the 970 Evo Plus. With bootabable flash drive with Paragon system also cant show the 970 evo plus ... i think this is not normal ?

reply

#6441 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 9:27 pm

@suspended:

Zitat von suspended im Beitrag #6436
After every one try the result is the same, windows is hanging on "getting devices ready" (black screen with loading circle)

The point of time of the issue (after having completed the OS installation and after the first reboot) indicates, that the NVMe SSD is bootable. Maybe there is a not properly working/not supported device connected to the mainboard.

Zitat von suspended im Beitrag #6436
Should i try to mod the bios with different NVME DxE mod?

No, I can exclude , that the NVMe BIOS module itself or the BIOS modding procedure has caused your problems.

Zitat von suspended im Beitrag #6436
Why i cant aces the 970 Evo Plus even when i boot from other SSD?

This is not normal. What does the Disk Management show (the SSD must have been initialized, formatted and gotten a drive letter). Additionally I recommend to check the health of the SSD by using Samsung's Magician.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6442 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 9:56 pm

The drive is tested on another PC with onboard m.2 slot with installed successfuly win 10, and samsung magician test the drive and report drive status is OK

reply

#6443 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 10:37 pm

@suspended: Since your NVMe SSD is bootable and your problem obviously caused by a hardware issue (M.2>PCIe adapter?) or BIOS problem, I cannot really help you and a further discussion would be off-topic.
Please check the mainboard manual regarding the data transfer limitations of the M.2/PCIe slots and check the BIOS settings according to my guide (= start post of this thread) and give us a feedback once you have detected the reason for your problem and were able to solve it.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6444 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 08, 2021 11:37 pm

Ok thanks, i will give a feedback if the i solve this problem.

reply

#6445 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 15, 2021 1:37 pm (Last edited: Mon Feb 15, 2021 1:45 pm)

can i get the link to the detailed instructions post? Im having the same issue but completely new to modding bios.

reply

#6446 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 15, 2021 1:52 pm

@dirtrider: Welcome to the Win-RAID Forum!

Zitat von dirtrider im Beitrag #5
can i get the link to the detailed instructions post?

>Here< is the requested link and the matching thread for users, who have questions about how to do it.
Good luck!
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6447 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 15, 2021 2:43 pm (Last edited: Mon Feb 15, 2021 3:46 pm)

Im getting this error when saving:

reply

#6448 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Feb 15, 2021 3:43 pm

@dirtrider:
Without knowing
a) which BIOS for which specific mainboard you tried to modify and
b) which tool you had used
I cannot help you.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#6449 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Tue Feb 16, 2021 1:44 pm (Last edited: Tue Feb 16, 2021 1:48 pm)

Hello Everyone, especially Fernando!
It seems that you are the only guy on planet earth with light staff in the hand. I really appreciate this forum during struggling with my new laptop configuration.
So lets go. I hope there is a solution for my problem.

I recently purchased a dell 5510 i7 6820 with chipset CM236 (probably).
So the point is that, I already integrated hotfix MVNe into iso image. Howevere, something very specific is happening. Whenever the computer is disconnected from the Power Supply the win7 setup runs and even go through the installation and copying the files. But after that when reset comes, it is loading and then appear the bluescreen with STOP: 0x000000d1 stornvme.sys; DRIVER_IRQL_NOT_LESS_OR_EQUAL.
Is there something I am missing ? The BIOS setup is UEFI mode (however i dont see NVME options.
I have M2. PCIe
and the SSD is pny cs2130

Please help if there is a solution

reply

#6450 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Tue Feb 16, 2021 2:01 pm

@osdyseus: Welcome to the Win-RAID Forum!
To make sure, that your modded BIOS was not the source of your problem, please attach it as *.ZIP file or post a link to it.
Question: Did you try to install Win10 onto your NVMe SSD? If yes, did you succeed or did you get an error message as well?
Additiionally please do a look into >this< report and the possible workaround. Maybe it will help.
Regards
Dieter (alias Fernando)

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

Please enter a reason for warning.