Which adapter do you advice for a Kingston A2000 500GB? I've seen a Supageek SG-123

Hello. I can't add nvme support to the bios of the Asus Sabertooth 990fx/gen3 R2.0 motherboard. please Upload the finished firmware file. Thank you in advance.

Hello,

I have been using Windows 7 from an SATA SSD until now before I got a Toshiba NVME SSD with the serial number of nvme thnsn5512gpuk nv from my broken laptop. I planned to install Windows 10 on it.

Following "[Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS," I have seemingly succeeded in injecting the NVME supporting hotfix into the BIOS. I subsequently flashed the BIOS to my ASUS Maximus VII Hero mobo with i7 4790K using USB Flashback feature of the mobo to flash the modded BIOS. The process was a success, and I did end up seeing entries beginning "PATA" from my BIOS. However, the windows installation program still prompts me saying that it cannot boot from the NVME drive. I have attached the original and the modded BIOS files below. Can someone please help me? Thank you very much!

Whoops. I just realized that I have to boot from a USB drive for it to work normally. Never mind! Admin, please delete my request if that is something that can be done. Nevertheless, thanks for the help within this forum!

Hi guys!
I have the same problem with my PCI-E SSD drive.
I have this motherboard: /Xeon/C600/X9DRW-iF.cfm
I have this PCI-e SSD:AORUS-RGB-AIC-NVMe-SSD-512GB#kf
Am I right that I should modify my BIOS? Will it works or not?
Could you help me with it or I can't use this drive for boot?
P.S. I can find my drive on installed windows and work with it, but I can't boot from it and I can't install windows: "windows cannot be installed to this disk. this computer's hardware may not support booting"

@mazzahaker

Insertion of NVMe mod with MMtool4 on bios 913

Will it work? Thats not a question to put due to a non official mod, dont u think?
Only a report from a user can give an answer to that.

Follow the guide and the choice/risk is all yours...as all others users have done it.

Edit: It should work with ur C602 chipset

OK, I modified my BIOS file and I have no PAD-file. In instruction said that I should public it here:

What's next?
Thanks!

EDIT by Fernando: Attached picture directly inserted

@Fernando
Really interesting.
Khm, If you have already insered it to my BIOS, Could you share it with me, please?
I'll be super grateful for it.
Thanks!

Hi again!
I have used AMI's MMTool 4.50.0023 with NvmExpressDxe_4
Now I have this pic (in attach).
I opened my BIOS, found CSMCORE, lighted it and insered *.ffs to BIOS.
After it I've checked and found that I have the same BIOS but with NVM entity via UEFITOOL
Thanks for your help and have Happy New Year!
It's really cool project!
I'll try to firmware it tomorrow.

Hi friends.
I have tried to add the NVME module to my BIOS ( My motherboard is an Asus Z87 Deluxe QUAD). I have follwed the steps of the guide, but I got the follwing error when the Asus EZ Flash 2 Utility tries to read it:
"Security Verification Failed"

I have also tried to use the cap from hancor of this thread "[OFFER] ASUS Z87-DELUXE-QUAD updated BIOS v2103 NVMe mod" but i got the same error.
I attach the original BIOS and the modified one.

Could you help me?
Thank you so much

EDIT by Fernando: This post has been restored by me