hello, When I try to install the new BIOS version, I get a very old version alert and I think it does not install. Then I press Enter and Q: exit.

@Fernando
i found a smaller version of Windows 10 and install it in FAT32
Now it works!! Thank you very much for your help, i will spent a few euros

Sorry for posting to wrong thread. To share my experience:
I have used NvmExpressDxe_4 UEFI module for my asus M5A97 R2 MB. Modded bios worked well and now I can boot from my new samsung 970 evo plus system drive :-) Thank you very much :-)
Short note regarding updating: At the very beginning of thread about bios updating I found information which worked for me - bios flashback. After I used it, I had new patched bios inside :-) Sorry again, I may search more, I was very impatient.

can you mod. z77-up7 ??

yes you are right i did it i need just a check:
motherboard : Gigabyte z77-up7
Bios Release: F5
modded one: https://www.dropbox.com/s/bsppb730gruixsq/z77xup7.f5?dl=0
original: https://download.gigabyte.com/FileList/B...z77x-up7_f5.exe

Hello everyone,
I have a ASUS Z9PE-D8 WS, and have the latest BIOS 5802, but because I have the latest BIOS version, my custom BIOS won't install. Does anyone have a good work around?

Hi all)
I modded bios file for my ASUS P8Z68-V PRO/GEN3, install on samsung evoplus a windows 10, all good except one: aften i shutdown PC, all turn off (windows, monitor) but coolers and videocard still worlking (videocard coolers are working and rgb light is on). That happen not every time: sometimes shutdown do like it should. If coolers dont shutdown i press a power button like 3-5 secs and PC turn off. After that, when i start my pc windows dont tell that the last shutdown was incorrect. Any suggestions what it can be? Thanks)

@Fernando:
That doesn't make any sense to me, nor does it address my issue. I was successfully able to modify the BIOS in this tutorial, but my motherboard does not allow you to override the current BIOS version with the same BIOS version, there are no newer versions of the BIOS available. It gives me a "Security Verification Failed" error when I try to update just the BIOS. NVME has nothing to do with the BIOS being flashed.

Hello, I have a PM981a 512GB M2 SSD for my Z77X UD5H using BIOS F16j. The bios itself can recognise my ssd in full name and after loading into Windows 10 installer(UEFI/legacy), the installer shows it is only 0MB. Can anyone help me? Thank you very much

PS It shows up on Windows System but I cannot initialised it. NVME controller also shows up on device manager, so I’m wondering what is the problem