Forum - RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS

#5281 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 7:23 pm (Last edited: Sun Jan 19, 2020 7:24 pm)

@Winner2990:
Have you read the chapter "Installation of the OS onto the NVMe SSD", which is point 4 of the to-do-list of my guide (= start post of this thread)?

Zitat von Winner2990 im Beitrag #5280
i have flashed my BIOS, but there is m.2, CSM or Windows Boot Manager

Where did you see the entries "m.2" and "CSM" as bootable devices? Please take a screenshot and post it.
You should not boot off the entry "Windows Boot Manager", but off the USB Flash Drive, which contains the desired Win10 image.
Furthermore you should unplug all other HDDs and SSDs except the NVMe one before you start with the OS installation.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5282 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 7:31 pm

@Fernando :
CSM is set to enabled

My operating system Windows 10 is on a standard SSD. But I would it preferred on a bootable m.2
Okay. I guess I give up.
Thanks for helping me, Fernando.
Many greetings from Mainz

reply

#5283 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 7:56 pm

@NVMe4me:
Why do you want to give up?
Remove your currently used SATA connected SSD, boot off the USB Flash drive with the desired OS on it in UEFI mode and do a fresh install of the OS onto it.
Greetings from the North Sea.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5284 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 8:13 pm (Last edited: Sun Jan 19, 2020 8:47 pm)

Zitat von Fernando im Beitrag #5281
@Winner2990:
Have you read the chapter "Installation of the OS onto the NVMe SSD", which is point 4 of the to-do-list of my guide (= start post of this thread)?

yes, of course i read it.
if i have installed only the nvme ssd and want to install windows from USB flash drive, then the error at the picture above follows (german)

here are two screenshots of BIOS/UEFI, there is NO m.2 or CSM
is this the complete UEFI or is there a advanced mode?

Winner2990 has attached images to this post

200119185623.jpg

reply

#5285 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 9:04 pm (Last edited: Sun Jan 19, 2020 9:05 pm)

@Winner2990:
Please explain, what exactly you have done and what happened at which point of the OS installation.
According to your previously posted picture you have told the Win10 Setup to install the OS into the 15 Megabyte sized partition1 of a disk drive. This could not work.
After having successfully booted off the USB Flash Drive in UEFI mode the OS Setup will ask you where to install the OS. At this point you should delete all partitions (if there should be any) of the target NVMe SSD and then create a new partion for the OS. This partition should have a suitable size (100-500 GB). After having done this, the OS Setup creates automaticly 2 additional small sized extra partitions (for the Windows Boot Manager and for Revovery purposes). You cannot install the OS onto one of these extra partitions!

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5286 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 11:31 pm (Last edited: Sun Jan 19, 2020 11:37 pm)

Hi. I made a mod bios for my Asus P8B WS. I allready found a success dtory about this board here and just made a mod and flas it. Now, I have only one NVME device - an Optane 16GB module (in pci-e adapter) in my system. And I see this:

on my boot order section. I see PATA SS: with no drive name/model. My PCI controller is in AHCI MODE.

Also, I have this bios settings now:

May be I should switch something, to see my optane?:)

reply

#5287 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 11:40 pm (Last edited: Sun Jan 19, 2020 11:44 pm)

@IdeaFix:
The device shown withn the BIOS with the name "PATA SS:" is your NVMe SSD.
To be able to boot off the NVMe SSD, you have to change the BIOS settings of the "PCI ROM Priority" from "Legacy ROM" to "UEFI ROM".
Please read the start post of this thread.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5288 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 11:44 pm

Is it possible to make a more exact NVME device name detection? Is this string "PATA SS:" hardcoded in bios? I will add my "new" intel 750 ssd in this system. It will be interesting to find one more pata device :)

reply

#5289 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 11:50 pm

Zitat von IdeaFix im Beitrag #5288
Is it possible to make a more exact NVME device name detection?

Possibly not. Why do you want to change the name, when you know what it means?
Better to be happy about the option to boot off an NVMe SSD with a mainboard, which natively doesn't support NVMe at all.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5290 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Sun Jan 19, 2020 11:54 pm (Last edited: Mon Jan 20, 2020 12:09 am)

@Fernando:
hey,
if i delete all partitions and create a new one, the error also pops up (pictures). no possibility to install windows

i think it is not in UEFI mode, because there is no choice to choose "[UEFI]:Storage.." in BIOS/UEFI, it calls only "Storage.."

Winner2990 has attached images to this post

WhatsApp Image 2020-01-19

reply

#5291 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Jan 20, 2020 12:14 am

@Winner2990:
To be able to get the NVMe SSD bootable, you have to enter the BIOS and
a) to disable the "Fast Boot" and "Secure Boot" options and
b) to allow loading of "UEFI ROM" modules.
All these things are layed down within the guide (= start post).

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5292 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Jan 20, 2020 12:25 am (Last edited: Mon Jan 20, 2020 12:43 am)

Zitat von Fernando im Beitrag #5289
Better to be happy about the option to boot off an NVMe SSD with a mainboard, which natively doesn't support NVMe at all.

Unfortunately, my system can not start in EFI mode even in default bios :( I see only black screen or full screen logo. I think, the reason is adaptec 71685 card or adaptec 71685+gtx1070.

Adaptec card have a lot of leds and i think, it is starting. Also, I see a good leds in hdd rack, but i see only fullscreen logo (or black screen wih fullscren logo=disable) and hear good short beeps each 60 seconds. May be, my system reboots every 60 seconds in this mode, but monitor is not blinking.

reply

#5293 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Jan 20, 2020 12:52 am

@IdeaFix:
Maybe your mainboard resp. its on-board or connected devices do not support the "full" UEFI mode (CSM disabled), but you should be able to boot in UEFI mode nevertheless.
There must be a BIOS option, which allows to usage of "UEFI" (instead of or additionally to Legacy Option ROM) modules.

My current System:
MB: ASRock X570 Pro4, CPU: AMD Ryzen 5 3600, System Drive: 500 GB Samsung 980 Pro, Graphics: Sapphire Radeon RX570, OS: Win10 x64 Pro
Donation Link:
If you are satisfied with my Forum activities, you can send a donation to my personal PayPal account by clicking onto >this< link.

reply

#5294 | RE: Full NVMe support for older Intel Chipsets possible! datum

Mon Jan 20, 2020 4:59 am (Last edited: Mon Jan 20, 2020 5:00 am)

Used the biosmod on my motherboard from Gigabyte Z87m-d3h bios F10. It´s working perfect with Samsung nvme 970 EVO.

Thank you very much!

reply

#5295 | RE: [Guide] How to get full NVMe support for all Systems with an AMI UEFI BIOS datum

Mon Jan 20, 2020 10:00 am (Last edited: Fri Jan 24, 2020 12:52 pm)

Zitat von Fernando im Beitrag #5291
@Winner2990: To be able to get the NVMe SSD bootable, you have to enter the BIOS and
a) to disable the "Fast Boot" and "Secure Boot" options and
b) to allow loading of "UEFI ROM" modules.
All these things are layed down within the guide (= start post).

i controll it again and all this things were in right options before

Winner2990 has attached images to this post

200120084324.jpg

reply

Please enter a reason for warning.