I used "ChangeLogo.exe" Changed logo cause my z87 can not overclock ram
the mh87 is normal after removed nvme ssd

when i read or write the bios it only read or write those block only like screenshot
and the bios(not the origin): ftp://ftp.bbtcat.cc/afuwin3.rom

I remember i add nvmexpressdxe4.ffs, and changed logo.
I just tested, the AFUWINGUIx64.exe says flash successed but the bios still is the original

Hello @szoo0268,

I am trying to do the same with my X9SRA. But when I load the bios file (latest X9SRA5.116), cant find where the PcieLaneDXE line is. Would you mind sharing your modded bios file?

thanks

Edit: got it working, had to use AMI tool rather than the other one and it was super easy. Kudos to the original author that found this solution.

EDIT by Fernando: Unneeded fully quoted post removed (to save space)

Sorry, I am writing through a translator. I installed vmexpressdxe4.ffs everything turned out, windows10 gpt-uefi loads fine, but there was a problem. switching to legacy in the BIOS, the computer stops seeing other disks, I can not boot even from bootable flash drives that are not uefi. So it should be, or is this the problem only with me?

Hello,
I would need you expert help.
I am using asus sabertooth x79, was fine with stock bios, the older format, ver 1203
then after hrs of pain i upgraded to 4701, with nvme module, foud in this thread.
system works, now with some 6 core. already great help to boot pci-e disk, thak you!
But i need to modify this 4701 nvme bios to run my 8 core, ES cpu 0x206D2, QA91 3.00 ghz
I have no balls to perform that mod. hoping thats possible
Thanks in advace for any help.
Joudnik

Hi everyone,
just a quick question since i don't have the time to read through the whole thread:

I want to mod my Asus M6H bios to boot from a NVMe SSD - should i use UBU or MMtool4?
Which guide should i read? It seems there is a looooot of information out there and i need some guidance as to where a good starting point is...

Thanks in Advance!

Hi sHawTY, Could you share your Bios, I have not managed to configure it successfully, greetings.

Hi guys,

I noticed a BIOS update by @Svan for my laptop that might work, but I wanted advice on if it could cause any issues.

I noticed the specs looked the same but the CPU for the BIOS update is for the I7-4710HQ.

I have the G751JY with the CPU I7-4720HQ. Does the exact processor make a difference, or will this work without issue? It's a work machine so I need to be certain I won't brick it :)

Here are my specs:
My System Specs:
- ASUS ROG G751JY
- i7-4720HQ @ 2.60 GHz, 2594 Mhz
- BIOS 213 (6/11/2019)
- 24GB RAM
- Replacing 250GB M.2 AHCI SSD with 1TB NVMe SSD
- Secondary drive: 1TB spinner
- Running Windows 10 build version 10.0.18362

Thanks :)

Any help to add my early cpu that i mentioned?? Thank you in advance

Zitat von mr_nuub im Beitrag #32

---

[quote=Jest|p15254]Chipset support 8 pcie lanes, which can be configured to 4x1 and 1x4. They are only 2.0, but can still Please do not forget, that PCIe 3.0 is requiered for NVMe.
PCIe 2.0 is not supported and will never be.

---