Nooooo, no Win10! I am willing to do the extra work.

Jeff

@Femando
Thanks for your reply soon.
I have found some different at the end of the DXE module between the mod file and the original bios file which have been attached for your information. Do you think this different is the root cause for this brick case?
I use the build in module inside the UEFI bios of the mb for flashing the mod bios.
I think the mb is bricked because I find there is no post on screen while the in broad LED lighted up, CPU fan turned on and the primary disk kept rolling when I start up the system.
Do you have some other suggestions on trying to see if the system have been bricked?
Thank you very much!
Sorry for my poor English writing made. 謝謝您!
Maxim

Hi,
Thanks for the awsome guide. I have asrock pro 3 gen 3 and everything went smooth. I updated the modified bios with the injected module.

I have a lot of questions, sorry :)
Before i spend money in the nvme drive and the pci converter is there anyway i can look if it is going to work? i dont have "Windows Boot Manager" in my bootable drives.
Is it because i have windows 10 installed in legacy mode?
If i install it in uefi mode will it show on bios?
and last question. I have pci rom priority in legacy, i tried to change to uefi and my pc doesn't go past the splash logo, i had to clear cmos. Do i need to have it in uefi or can i leave it in legacy?

@master00
Normally default setting would show the windows boot manager when you have installed the system and GPT disk format.

Hi Fernando,
Thanks for your reply. I read some message on Web.,that say if the bootblock part is not damaged, then someone can use the bios recovery method to achevice the bios back. So, how can I know, if the bootblock is alright ? I can see the front LTE of the DVD writer light up when I startup power of the machine.
Besides, for the case of my Asus P8P67 pro, I have installed win10 on it and work seemed without issue for I find that one dual channel of my ram device does not work, I shall check if the mod bios affect the ram setup or not later this week. Do you have any insight on this?
Thank you very much. 謝謝您。

Thanks for the modded bios for my MSN 970A-G43. Now I can boot win 10 from my HP SSD EX900 M.2 with my Kingshare adapter. The speed is amazing. Some of the applications and google chrome are so fast that I don't even have time to blink.

Thanks for the answers. However in pci rom priority if i select uefi bios my pc doesn't go past the splash screen :(