EasyBCD does not give any option or find any dual entry ... and as mention "There is one entry in the Windows bootloader"

is this might anything to do with window secure boot enabled maybe? just cant figure this

I think it's about "UEFI" and "Legacy" being active at the same time.
Can you boot from both ?

@XGen you might have some luck with this tool https://www.easyuefi.com/index-us.html

Zitat von agentx007 im Beitrag #4412

---

I think it's about "UEFI" and "Legacy" being active at the same time.
Can you boot from both ?

---

As mentioned it bootable with both. and both boots with uefi.

@Fernando Tell that to MB's BIOS/UEFI, not me ;D
Maybe it didn't get the memo about "not booting NVMe under Legacy" ?

Either way : First change "both" option is BIOS to UEFI only.
Second : Check if there aren't any BCD files left over.
Question : Could it be that you cloned your drive recently (or during OS migrating), and simply forgot to delete the original OS/wipe the drive ?

@agentx007 I cloned it that might be the case. however easyuefi solved it though. now drive partitions showed misaligned as the source 850 evo ssd was properly aligned.

I'm hesitate to align the partitions. might be time consuming + writing on ssd. don't know if any impact on performance of 970 evo, though 970 has its own controller that can handle all that. is still need align or not needed...

guys, i have an MSI Z87 MPOWER i want to use and PCIe adapter to put a nvme ssd, can anyone check is my mod bios ok?

https://mega.nz/#!M1R0DQDb!lc2yHAlfMlCAR...g9MyyvDfFMlNoZU

thanks