Good question.

Originally its seems to be already here. but what its can be ... ? I don t know.
You can check that on the supermicro motherboard link and download the original bios.

yep possible.

But after patch the bios the device appear on the bootale dish option anyway.

The real boot problem appear for the NVME and AHCI SSD.
The bios coulden t load files from them.

I blocked again ;(

I hope Supermicro tech can out the bios fix soon. I stay in contact with them.

Maybe its possible to find other MB bios with different module ... I don t know ...

Cauldn´t get Nvme (sm951) to boot from Bios on P8Z77V-LX2 with modded Bios (3files and the new 1 file method) extract and flashed it with afudos (/gan) :(

Biascho,

Just use only the one Nvme express driver and nothing else. The other three may not play nice with it.

Good luck!

Greetings Fernando!
I have a ASRock Z77 Extreme 6 / TB4 mobo and recently upgraded to a Intel 750 400GB PCI-E.
I plugged in my new drive and discovered it cannot be boot to and therefore windows cannot be installed to it.
Unfortunately I did not do my homework and I have discovered that NVMe drives are not supported at this time.
Luckily, there is a beta driver for the non-thunderbolt version of my board.
http://www.asrock.com/mb/Intel/Z77%20Extreme6/?cat=Beta
Unfortunately I cannot install this to my board as it is not quite the same and I guess they have some header to ignore all images that are not for a particular board.
Strangely the CSMCORE is exactly the same and there are no NVMe modules.

I followed another post of yours and downloaded and extracted the 3 NVMe modules and they would not fit in my latest bios as they exceed the volume size.
To resolve this I tried putting them in empty space below CSMCORE and this caused the bios to lock on entry to configuration.
Next, I tried moving the end modules up and putting the 3 files at the bottom, which succeeded but I still cannot boot from the device.
I tried putting a bootloader on a separate drive and windows crashes after the initial install and boot (winload.exe)
I cannot put the clover driver at the end compressed or not as the volume is not large enough.
ANY suggestions will be much appreciated,
Happy Christmas

EDIT: When I say it cannot be boot to I mean it does not show up in the boot device selection. I can see using the ASRock system viewer that it is in the slot and it is called Intel Corporation Storage Management. I contacted ASRock, who suggested to format the drive to GPT....

Merry Xmas 4 u all, too !!

Tested again with no luck, will share my bios files https://www.dropbox.com/s/shybkuap20pvejv/mod.zip?dl=0 (BACKUP.rom=backup bios from running one with afudos) (mod.rom=nvme Driver inserted) (mod2.rom=3 files mod) (orig.cap=original downloaded bios for P8Z77V-LX2) (mod.cap=modded bios with nvme .... this one cauldnt be flashed for size reason ....tested the compressed one,too)
My Bios is only flashable via afudos GAN method ;(

Any help ????

I tried this but "the file size exceeds the volume size". I even tried the compressed one.
Thanks!

Zitat von thebagmaster im Beitrag #416

---

I tried this but "the file size exceeds the volume size". I even tried the compressed one.

---

Hi, yesterday took advantage of this method of hats. Z87 xpower. I flash bios. SSD Samsung PRO 950 I will be the 29th number. But I noticed a spontaneous reboot. Freeze for a few seconds and restart. 3 has been observed for a reboot during the day. Where to dig? What is the reason? Now I sit on the Samsung 840 PRO, Samsung magician 4.9. If reboots can not be avoided, then I still have time to withdraw from the purchase 950 PRO. Thank you.