Screenshort

Zitat von Fernando im Beitrag #3460

---

Without any further information about how you have configurated your system it is not easy to give any advice.
Which NVMe BIOS module did you insert and why did you do it at all? Mainboard BIOSes of Intel 9-Series Chipset usually natively do support NVMe.
Which NVMe driver are you using? Did you try to install the OCZ/Toshiba NVMe driver?

---

this is the bios efi

I think after watching bios, no there is pcilanedxe, maybe because the pci lane are in northbridge and not in cpu?

Fernando
Im going to boot windows 7 from 970 Evo. Installer do not see disk even if i show him drivers that works under windows 7 as secondary disk.
Many people were succeed with it. I did all according your guide. What drivers to show win7 installer ? samsung nvme 3.0 driver ?

Do you think to insert module in nbdxe, right?

@stallion,
Getting Windows 7 installed on the 970 EVO is more complicated than installing Windows 10. You can read my post regarding Windows 7 installs here. Make sure no other drive is connected to the system. I would try first without integrating the hot fixes into the Windows 7 install USB (it worked for me once). You will have to install Intel USB 3.0 drivers when asked for drivers (see my post), then install the Samsung NVMe version 3.0 driver for the 970 EVO. The 970 EVO should then be listed as Disk 1 unallocated space. If it says that windows cannot be installed to this drive, try clicking the "Next" button. If this doesn't work, you will have to try integrating the hot fixes to the Windows 7 USB.

this is mod nvme efi bios
in any case if I had to return wrong because I use the TL866.
but it would be an honor for me to tell you about the mod

I have follow the guide, insert after chosing nbdxe because i have not pcilanedxe